[1] FORRESTAL M J, LUK V K.  Penetration into soil targets[J]. International Journal of Impact Engineering, 1992, 12(3): 427-444.   doi: 10.1016/0734-743X(92)90167-R
[2] FORRESTAL M J, FREW D J, HANCHAK S J, et al.  Penetration of grout and concrete targets with ogive-nose steel projectiles[J]. International Journal of Impact Engineering, 1996, 18(5): 465-476.   doi: 10.1016/0734-743X(95)00048-F
[3] QIAN L X, YANG Y B, LIU T.  A semi-analytical model for truncated-ogive-nose projectiles penetration into semi-infinite concrete targets[J]. International Journal of Impact Engineering, 2000, 24(9): 947-955.   doi: 10.1016/S0734-743X(00)00008-7
[4] 吴祥云, 李永池, 何翔, 等.  细长弹体侵彻混凝土的机理研究[J]. 岩石力学与工程学报, 2003, 22(11): 1817-1822.   doi: 10.3321/j.issn:1000-6915.2003.11.013
WU X Y, LI Y C, HE X, et al.  On mechanism of slender projectile penetrating into concrete[J]. Chinese Journal of Rock Mechanics and Engineering, 2003, 22(11): 1817-1822.   doi: 10.3321/j.issn:1000-6915.2003.11.013
[5] 温志鹏, 王玉祥, 吕本明, 等.  弹体垂直侵彻混凝土介质开坑深度的计算方法[J]. 常州工学院学报, 2005, 18(S1): 82-84.
[6]

刘海鹏, 高世桥, 金磊. 弹丸侵彻混凝土靶板成坑实验及量纲分析[C] // 第十届全国冲击动力学学术会议论文摘要集. 太原: 中国力学学会爆炸力学专业委员会冲击动力学专业组, 2011.

[7]

刘海鹏, 高世桥, 金磊. 弹侵彻混凝土靶面成坑机理分析[C] // 第六届全国强动载效应及防护学术会议暨2014年复杂介质/结构的动态力学行为创新研究群体学术研讨会论文集. 北京: 中国力学学会爆炸力学专业委员会, 2014.

[8] 刘海鹏, 高世桥, 金磊, 等.  弹侵彻混凝土靶面成坑的分阶段分析[J]. 兵工学报, 2009, 30(S2): 52-56.
LIU H P, GAO S Q, JIN L, et al.  Phase analysis on crater-forming of projectile penetrating into concrete target[J]. Acta Armamentarii, 2009, 30(S2): 52-56.
[9]

闪雨. 弹体非正侵彻混凝土质量侵蚀与运动轨迹研究[D]. 北京: 北京理工大学, 2015.

[10] WU H J, WANG Y N, HUANG F L.  Penetration concrete targets experiments with non-ideal & high velocity between 800 and 1 100 m/s[J]. International Journal of Modern Physics B, 2008, 22(9−11): 1087-1093.
[11] 薛建锋, 沈培辉, 王晓鸣.  弹体斜侵彻混凝土靶面的开坑阶段分析[J]. 南京理工大学学报, 2016, 40(1): 72-76, 83.   doi: 10.14177/j.cnki.32-1397n.2016.40.01.012
XUE J F, SHEN P H, WANG X M.  Analysis on crater-forming of projectile obliquely penetrating into concrete target[J]. Journal of Nanjing University of Science and Technology, 2016, 40(1): 72-76, 83.   doi: 10.14177/j.cnki.32-1397n.2016.40.01.012
[12] 周宁, 任辉启, 沈兆武, 等.  弹丸侵彻混凝土和钢筋混凝土的实验[J]. 中国科学技术大学学报, 2006, 36(10): 1021-1027.   doi: 10.3969/j.issn.0253-2778.2006.10.001
ZHOU N, REN H Q, SHEN Z W, et al.  Experimental on the projectile penetration concrete targets and reinforced concrete targets[J]. Journal of University of Science and Technology of China, 2006, 36(10): 1021-1027.   doi: 10.3969/j.issn.0253-2778.2006.10.001
[13] 周宁, 任辉启, 沈兆武, 等.  卵形头部弹丸侵彻钢筋混凝土的工程解析模型[J]. 振动与冲击, 2007, 26(4): 73-76.   doi: 10.3969/j.issn.1000-3835.2007.04.017
ZHOU N, REN H Q, SHEN Z W, et al.  Engineering analytical model for ogive-nose projectiles to penetrate into semi-infinite reinforced concrete targets[J]. Journal of Vibration and Shock, 2007, 26(4): 73-76.   doi: 10.3969/j.issn.1000-3835.2007.04.017
[14] 黄民荣, 顾晓辉, 高永宏.  刚性弹丸侵彻钢筋混凝土的实验和简化分析模型[J]. 实验力学, 2009, 24(4): 283-290.
HUANG M R, GU X H, GAO Y H.  Experiment and simplified analytical model for penetration of rigid projectile in a reinforced concrete target[J]. Journal of Experimental Mechanics, 2009, 24(4): 283-290.
[15]

张爽. 弹体侵彻/贯穿钢筋混凝土靶机理与弹道轨迹研究[D]. 北京: 北京理工大学, 2018.

[16] MELOSH H J.  Cratering mechanics-observational, experimental, and theoretical[J]. Annual Review of Earth and Planetary Sciences, 1980, 8: 65-93.   doi: 10.1146/annurev.ea.08.050180.000433
[17] HOLSAPPLE K A.  The scaling of impact processes in planetary sciences[J]. Annual Review of Earth and Planetary Sciences, 1993, 21: 333-373.   doi: 10.1146/annurev.ea.21.050193.002001
[18] DUFRESNE A, POELCHAU M H, KENKMANN T, et al.  Crater morphology in sandstone targets: the MEMIN impact parameter study[J]. Meteoritics & Planetary Science, 2013, 48(1): 50-70.   doi: 10.1111/maps.12024
[19] POELCHAU M H, KENKMANN T, THOMA K, et al.  The MEMIN research unit: scaling impact cratering experiments in porous sandstones[J]. Meteoritics and Planetary Science, 2013, 48(1): 8-22.   doi: 10.1111/maps.12016
[20] ANTOUN T H, GLENN L A, WALTON O R, et al.  Simulation of hypervelocity penetration in limestone[J]. International Journal of Impact Engineering, 2006, 33(1−12): 45-52.   doi: 10.1016/j.ijimpeng.2006.09.009
[21] WÜNNEMANN K, COLLINS G S, MELOSH H J.  A strain-based porosity model for use in hydrocode simulations of impacts and implications for transient crater growth in porous targets[J]. Icarus, 2006, 180(2): 514-527.   doi: 10.1016/j.icarus.2005.10.013
[22] KENKMANN T, WÜNNEMANN K, DEUTSCH A, et al.  Impact cratering in sandstone: the MEMIN pilot study on the effect of pore water[J]. Meteoritics & Planetary Science, 2011, 46(6): 890-902.   doi: 10.1111/j.1945-5100.2011.01200.x
[23] 邓国强, 杨秀敏.  超高速武器对地打击效应数值仿真[J]. 科技导报, 2015, 33(16): 65-71.   doi: 10.3981/j.issn.1000-7857.2015.16.010
DENG G Q, YANG X M.  Numerical simulation of damage effect of hyper velocity weapon on ground target[J]. Science & Technology Review, 2015, 33(16): 65-71.   doi: 10.3981/j.issn.1000-7857.2015.16.010
[24] DAWSON A, BLESS S, LEVINSON S, et al.  Hypervelocity penetration of concrete[J]. International Journal of Impact Engineering, 2008, 35(12): 1484-1489.   doi: 10.1016/j.ijimpeng.2008.07.069
[25] GOLD V M, VRADIS G C, PEARSON J C.  Concrete penetration by eroding projectiles: experiments and analysis[J]. Journal of Engineering Mechanics, 1996, 122(2): 145-152.   doi: 10.1061/(ASCE)0733-9399(1996)122:2(145)
[26] GOLD V M, VRADIS G C.  Analysis of penetration resistance of concrete[J]. Journal of Engineering Mechanics, 1998, 124(3): 328-338.   doi: 10.1061/(ASCE)0733-9399(1998)124:3(328)
[27] 钱秉文, 周刚, 李进, 等.  钨合金弹体超高速撞击混凝土靶成坑特性研究[J]. 北京理工大学学报, 2018, 38(10): 1012-1017.   doi: 10.15918/j.tbit1001-0645.2018.10.004
QIAN B W, ZHOU G, LI J, et al.  Study of the crater produced by hypervelocity tungsten alloy projectile into concrete target[J]. Transactions of Beijing Institute of Technology, 2018, 38(10): 1012-1017.   doi: 10.15918/j.tbit1001-0645.2018.10.004
[28] KONG X Z, WU H, FANG Q, et al.  Projectile penetration into mortar targets with a broad range of striking velocities: test and analyses[J]. International Journal of Impact Engineering, 2017, 106: 18-29.   doi: 10.1016/j.ijimpeng.2017.02.022