[1] DUFFEY T A, ROMERO C.  Strain growth in spherical explosive chambers subjected to internal blast loading[J]. International Journal of Impact Engineering, 2003, 28(9): 967-983.   doi: 10.1016/S0734-743X(02)00169-0
[2] DONG Q, LI Q M, ZHENG J Y.  Interactive mechanisms between the internal blast loading and the dynamic elastic response of spherical containment vessels[J]. International Journal of Impact Engineering, 2009, : 1-10.   doi: 10.1016/j.ijimpeng.2009.10.004
[3] 刘文祥, 张庆明, 钟方平, 等.  球壳塑性变形下的应变增长现象[J]. 爆炸与冲击, 2017, 37(5): 893-898.   doi: 10.11883/1001-1455(2017)05-0893-0
LIU Wenxiang, ZHANG Qingming, ZHONG Fangping, et al.  Strain growth of spherical shell subjected to internal blast loading during plastic response[J]. Explosion and Shock Waves, 2017, 37(5): 893-898.   doi: 10.11883/1001-1455(2017)05-0893-0
[4] KARPP R R, DUFFEY T A, NEAL T R.  Response of containment vessels to explosive blast loading[J]. Journal of Pressure Vessel Technology, 1980, 105(1): 23-27.   doi: 10.1115/1.3264234
[5] 刘文祥, 张庆明, 谭书舜, 等.  球形爆炸容器的应变增长现象[J]. 爆炸与冲击, 2013, 33(S1): 99-104.
LIU Wenxiang, ZHANG Qingming, TAN Shushun, et al.  Strain growth in spherical explosion vessels subjected to internal blast loading[J]. Explosion and Shock Waves, 2013, 33(S1): 99-104.
[6] DONG Q, LI Q M, ZHENG J Y.  Further study on strain growth in spherical containment vessels subjected to internal blast loading[J]. International Journal of Impact Engineering, 2010, 37: 196-206.   doi: 10.1016/j.ijimpeng.2009.09.001
[7] LIU W X, ZHANG Q M, ZHONG F P, et al.  Further research on mechanism of strain growth caused by superposition of different vibration modes[J]. International Journal of Impact Engineering, 2017, 104: 1-12.   doi: 10.1016/j.ijimpeng.2017.01.025
[8] DUFFEY T A.  Optimal bolt preload For dynamic loading[J]. International Journal of Mechanical Science, 1993, 3(35): 257-265.   doi: 10.1016/0020-7403(93)90080-e
[9]

DUFFEY T A, LEWIS B B, BOWERS S M. Bolt preload selection for pulsed-loaded vessel closures [C]// ASME PVP Conference, 1995.

[10]

闻邦椿. 机械设计手册: 第二册 [M]. 北京: 机械工业出版社, 2012.

[11]

AUTODYN user’s manual 4.3 [M]. Century Dynamics, 2001.

[12]

LS-DYNA keyword user’s manual 971 [M]. Livermore Software Technology Corporation, 2010.

[13] 李会勋, 胡迎春, 张建中.  利用ANSYS模拟螺栓预紧力的研究[J]. 山东科技大学学报, 2006, 25(1): 57-59.   doi: 10.16452/j.cnki.sdkjzk.2006.01.017
LI Huixun, HU Yingchun, ZHANG Jianzhong.  Study on simulating bolt pretension by using ANSYS[J]. Journal of Shandong University of Science and Technology, 2006, 25(1): 57-59.   doi: 10.16452/j.cnki.sdkjzk.2006.01.017