[1] Thota J, Trabia M B, O'Toole B J. Simulation of shock response in a lab-scale space frame structure using finite element analysis[J]. ASME 2011 International Mechanical Engineering Congress and Exposition, 2011, 218(1):75-86.
[2] 沈诣, 洪荣晶, 高学海, 等.大型结构的螺栓连接有限元简化方法与验证[J].机械设计与制造, 2012(8):26-28.

Shen Yi, Hong Rongjing, Gao Xuehai, et al. A simplify method and verification with FEM for bolt connection of large-scale structure[J]. Machinery Design & Manufacture, 2012(8):26-28.
[3] Hartwigsen C J, Song Y, Mcfarland D M, et al. Experimental study of non-linear effects in a typical shear lap joint configuration[J]. Journal of Sound and Vibration, 2004, 277(1/2):327-351.
[4] Fu W P, Huang Y M, Zhang X L, et al. Experimental investigation of dynamic normal characteristics of machined joint surfaces[J]. Journal of Vibration & Acoustics, 2000, 122(4):393-398.
[5] He Y C, Wan Y C. Load-deflection behaviour of thin-walled plates with a single bolt in shearing[J]. Thin-Walled Structures, 2011, 49(10):1261-1276.
[6] Gaul L, Lenz J. Nonlinear dynamics of structures assembled by bolted joints[J]. Acta Mechanica, 1997, 125(1):169-181.
[7] Butner C M, Adams D E, Foley J R. Experimental investigation of the effects of bolt preload on the dynamic response of a bolted interface[J]. Journal of Applied Mechanics, 2013, 80(1):011016.
[8] Segalman D J. A four-parameter Iwan model for lap-type joints[J]. Journal of Applied Mechanics, 2005, 72(5):752-760.
[9] Tian H, Li B, Liu H, et al. A new method of virtual material hypothesis-based dynamic modeling on fixed joint interface in machine tools[J]. International Journal of Machine Tools & Manufacture, 2011, 51(3):239-249.
[10] 黄开放, 金建新.基于虚拟材料方法的螺栓预紧力模拟的研究[J].机械设计与制造, 2012(8):148-150.

Huang Kaifang, Jin Jianxin. Research on bolt preload simulation based on virtual material method[J]. Machinery Design & Manufacture, 2012(8):148-150.
[11] Shi Y, Wang M, Wang Y. Analysis on shear behavior of high-strength bolts connection[J]. International Journal of Steel Structures, 2011, 11(2):203-213.
[12] Thota J, O'Toole B J, Trabia M B. Optimization of shock response within a military vehicle space frame[J]. Structural & Multidisciplinary Optimization, 2011, 44(6):847-861.
[13] 柳征勇, 骆剑, 唐国安.大型卫星整流罩分离冲击载荷分析研究[J].航天器环境工程, 2008, 25(5):467-470.

Liu Zhengyong, Luo Jian, Tang Guoan. The studies on the impact force for separation of the large payload fairing[J]. Spacecraft Environment Engineering, 2008, 25(5):467-470.
[14] Han Z, Shah V N, Abou-Hanna J, et al. Dynamic structural analysis of the 9516 transport package[J]. ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference, 2010, 45(3):378-391.
[15] 张学良, 温淑花.基于接触分形理论的结合面切向接触刚度分形模型[J].农业机械学报, 2002, 33(3):91-93.

Zhang Xueliang, Wen Shuhua. A fractal model of tangential contact stiffness of joint surfaces based on the contact fractal theory[J]. Transactions of the Chinese Society for Agricultural Machinery, 2002, 33(3):91-93.
[16] 葛世荣, Tonder K.粗糙表面的分形特征与分形表达研究[J].摩擦学学报, 1997, 17(1):74-81.

Guo Shirong, Tonder K. The fractal behavior and fractal characterization of rough surfaces[J]. Tribology, 1997, 17(1):74-81.
[17] 潘玉良, 吴立群, 张云电.分形模型参数与粗糙度参数Ra关系的研究[J].中国工程科学, 2004, 6(5):49-51.

Pan Yuliang, Wu Liqun, Zhang Yundian. Study of the relationship between fractal model parameters and roughness parameter Ra[J]. Engineering Science, 2004, 6(5):49-51.
[18] 张学良, 黄玉美, 傅卫平, 等.粗糙表面法向接触刚度的分形模型[J].应用力学学报, 2000, 17(2):31-35.

Zhang Xueling, Huang Yumei, Fu Weiping. Fractal model of normal contact stiffness between rough surfaces[J]. Chinese Journal of Applied Mechanics, 2000, 17(2):31-35.
[19] Nassar S A, Abboud A. An improved stiffness model for bolted joints[J]. Journal of Mechanical Design, 2009, 131(12):121001.
[20] 杨国庆, 王飞, 洪军, 等.螺栓被连接件刚度理论的计算方法[J].西安交通大学学报, 2012, 46(7):50-56.

Yang Guoqing, Wang Fei, Hong Jun, et al. Theoretical analysis for bolted member stiffness[J]. Journal of Xi'an Jiaotong University, 2012, 46(7):50-56.
[21] Lehnhoff T F, Ko K, McKay M L. Member stiffness and contact pressure distribution of bolted joints[J]. Journal of Mechanical Design, 1994, 116(2):550-557.