Experimental investigation on dynamic compressive behaviors of carbon cloth/carbon composites
-
摘要: 利用带有波形整形器的Split Hopkinson Pressure Bar(SHPB)技术测试了碳布叠层/碳复合材料在应变率为500、1 500 s-1时的动态压缩性能。研究结果表明:利用轧制紫铜作为整形器材料不仅可以有效地实现对碳布叠层/碳复合材料的常应变率压缩加载,而且有助于改善试样两端的应力平衡,从而保证测试数据的可靠性;此外,与准静态压缩相比较,在动态压缩载荷下,碳布叠层/碳复合材料的压缩强度有较强的应变率效应,且复合材料压缩强度的动态增加函数可以用Cowper-Symonds幂函数的形式来表示。Abstract: Dynamic compressive behaviors of carbon cloth /carbon composites were experimentally studied at the strain rates of 500, 1 500 s-1 by the split Hopkinson pressure bar with pulse shaper. Experimental results show that the pulse shaping technique ensures nearly constant strain-rate deformation experienced by specimens under dynamically equilibrated stresses so that accurate stress-strain curves at two high rates can be obtained. Compared with quasi-static compression, the dynamic compressive strength of carbon cloth/carbon composite has strong stain-rate sensitivity and it increases with strain rate. A phenomenological strain-rate-dependent material model of Cowper-Symonds power function was proposed to describe the stress-strain response of composites. The calculated results by the proposed model agree well with the experimental data at high and low strain rates.
-
Key words:
- solid mechanics /
- dynamic compression /
- SHPB /
- C/C composites /
- strain rate sensitivity
期刊类型引用(8)
1. Huan-yu Qian,Yong-gang Yu,Jing Liu. Effects of module number and firing condition on charge thermal safety in gun chamber. Defence Technology. 2022(01): 27-37 . 必应学术
2. 叶青,余永刚. 圆孔装药固体火箭发动机的慢速烤燃特性研究. 装备环境工程. 2022(03): 26-31 . 百度学术
3. 叶青,余永刚. 含能材料热安全性研究进展. 装备环境工程. 2022(03): 1-10 . 百度学术
4. 刘静,赵非玉. 不同升温速率下模块装药的烤燃特性分析. 装备环境工程. 2022(03): 11-16 . 百度学术
5. 邓海,赵小锋,任新联,李刚,梁争峰. 不同约束条件下硝酸酯类PBX炸药装药慢烤响应特性. 火炸药学报. 2021(05): 652-657 . 百度学术
6. 刘静,余永刚. 不同升温速率下模块装药慢速烤燃特性的数值模拟. 兵工学报. 2019(05): 990-995 . 百度学术
7. 徐洪涛,金朋刚. 炸药缓慢加热条件实验技术进展. 装备环境工程. 2019(09): 5-17 . 百度学术
8. 黄亨建,陈科全,陈红霞,陈翔,宋乙丹,路中华,李兴隆,寇剑锋. 国外钝感弹药危害缓解设计的原理和方法. 含能材料. 2019(11): 974-980 . 百度学术
其他类型引用(6)
-
计量
- 文章访问数: 2375
- HTML全文浏览量: 100
- PDF下载量: 336
- 被引次数: 14