-196 ℃奥氏体不锈钢母材与焊缝的动态断裂韧性

潘建华; 陈学东; 韩豫

doi:10.11883/1001-1455(2013)04-0381-06

-196 ℃奥氏体不锈钢母材与焊缝的动态断裂韧性

doi: 10.11883/1001-1455(2013)04-0381-06

潘建华^1,2, ,,
陈学东^1,2,
韩豫³

1.
(1.中国科学技术大学中国科学院材料力学行为和设计国家重点实验室，安徽合肥230027； 2.合肥通用机械研究院国家压力容器与管道安全工程技术研究中心，安徽合肥230031； 3.宁波工程学院机械工程学院，浙江宁波315016)

基金项目:

合肥通用机械研究院青年科技基金项目(2011011268)

详细信息

作者简介:
 潘建华(1981— )，男，博士研究生。

通讯作者:
潘建华

计量
- 文章访问数: 2645
- HTML全文浏览量: 87
- PDF下载量: 212
- 被引次数: 0
出版历程
- 刊出日期: 2013-07-25

Dynamic fracture toughness of S30408 austenitic stainless steel base and weld metals at -196 ℃

Pan Jian-hua^{1,2
, ,},
Chen Xue-dong^1,2,
Han Yu³

1.
(1. CAS Key Laboratory for Mechanical Behaviour and Design of Materials, University of Science and Technology of China, Hefei230027, Anhui, China;2. National Safety Engineering Technology Research Center on Pressure Vessel and Pipeline, Hefei General Machinery Research Institute, Hefei230031, Anhui, China;3. School of Mechanical Engineering, Ningbo University of Technology, Ningbo315016, Zhejiang, China)

摘要

摘要: 在-196 ℃对S30408奥氏体不锈钢的母材和焊缝进行了夏比摆锤冲击实验，采用改进的柔度变化率法得到了低温下不锈钢母材夏比试样的起裂点。结果表明，采用改进的柔度变化率法得到的结果比采用传统的柔度变化率法得到的结果更准确。根据实验得到的载荷-位移曲线，结合采用Schindler法和关键曲线法各自所得结果的优点，得到了不锈钢母材的动态裂纹扩展阻力曲线（动态J-R曲线）。依据不锈钢焊缝在低温动载下的载荷-位移曲线及其断裂特征，通过线弹性断裂力学计算获得其动态断裂韧性。
- 爆炸力学 /
- 动态断裂韧性 /
- 夏比冲击实验 /
- 奥氏体不锈钢 /
- 低温 /
- 改进的柔度变化率法 /
- Schindler法 /
- 关键曲线法 /
- 动态裂纹扩展阻力曲线
Abstract:  Charpy pendulum impact tests were carried out on S30408 austenitic stainless steel base and weld metals at -196 ℃. The modified compliance changing rate method was used to obtain the crack initiation point of the base metal specimen. The analyses show that the results obtained by the improved method are more accurate than those by the traditional compliance changing rate method. Based on the experimental loaddisplacement curves, the Schindler procedure and key curve method were combined to achieve the dynamic crack growth resistance curve of the base metal. According to the loaddisplacement curves of the weld metal and its fracture characteristics, the dynamic fracture toughness of the weld metal was calculated by the linear elastic fracture mechanics approach.
- mechanics of explosion /
- dynamic fracture toughness /
- Charpy impact test /
- austenitic stainless steel /
- low temperature /
- modified compliance changing rate method /
- Schindler procedure /
- key curve method /
- dynamic crack growth resistance curve