复合射孔爆燃气体压裂裂缝起裂扩展研究

李海涛; 罗伟; 姜雨省; 张俊松

doi:10.11883/1001-1455(2014)03-0307-08

复合射孔爆燃气体压裂裂缝起裂扩展研究

doi: 10.11883/1001-1455(2014)03-0307-08

1.
西南石油大学油气藏地质及开发工程国家重点实验室，四川成都 610500
2.
中海油能源发展股份有限公司工程技术分公司，天津 300452
3.
中石化石油工程西南有限公司井下作业分公司，四川德阳 618000

基金项目: 国家科技重大专项项目(2011ZX05022-006-004HZ)

详细信息

作者简介:
李海涛(1965—), 男, 博士, 教授, 博士生导师

通讯作者:
Luo Wei, lwswpu@163.com

中图分类号: O389
计量
- 文章访问数: 4293
- HTML全文浏览量: 520
- PDF下载量: 729
- 被引次数: 0
出版历程
- 收稿日期: 2012-11-13
- 刊出日期: 2014-05-25

Initiation and extension of gas-driven fracture during compound perforation

1.
State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500, Sichuan, China
2.
CNOOC Energy Technology-Drilling & Production Co, Tianjin 300452, China
3.
Downhole Service Branch of Southwest Petroleum Engineering Company, Sinopec Corp, Deyang 618000, Sichuan, China

摘要

摘要: 结合线弹性断裂力学的裂缝尖端应力强度因子判据，建立了复合射孔爆燃气体压裂裂缝的起裂扩展模型，通过建立与多个变量相关的缝内气体压力分布函数，利用迭代法实现了模型的数值求解，获得了缝内气体压力分布随时间的动态变化规律，并分析了不同特征参数对裂缝起裂扩展与止裂过程的影响。实例计算结果表明：(1)随着裂缝扩展的进行，爆燃气体流动尖端与裂缝尖端经历了由重合到不重合再到重合的过程；(2)地应力越大，裂缝起裂扩展越困难，爆燃气体有效致裂作用时间越短，最终得到的裂缝扩展长度也越小；(3)初始裂缝越长，裂缝更容易起裂扩展，爆燃气体能量利用率越高，裂缝扩展更长；(4)岩石断裂韧性的改变对裂缝起裂、止裂和裂缝扩展长度没有明显的影响；(5)升压速率越小，爆燃气体有效致裂作用时间越长，最终裂缝扩展也更长，但对裂缝起裂压力与止裂压力几乎没有影响。
- 爆炸力学 /
- 裂缝起裂扩展 /
- 数值耦合求解 /
- 复合射孔 /
- 缝内气体压力分布 /
- 裂缝止裂
Abstract: Combined with the crack tip stress intensity factor criterion of linear elastic fracture mechanics, the model of initiation and extension of gas-driven fractures by compound perforation is established.A function with multiple variables describing gas pressure distribution in crack is proposed herein to realize the numerical resolution of the model using the iteration method, and the dynamic change law of gas pressure distribution in fracture with time is obtained.In addition, the effect of different characteristic parameters on the process of fracture initiation and extension as well as fracture arrest is analyzed.The example calculation shows: (1)with the progress of fracture extension, the leading edge of the flow and the fracture tip will experience the process from coincidence to noncoincidence and then to coincidence; (2)the fracture initiation and extension are more difficult as in-situ stress is greater, which makes the effective time of gas-driven and the fracture shorter; (3)the fracture initiation and extension are easier and the utilization of gas energy is higher as the initial crack is longer, resulting in the longer crack; (4)the change of fracture toughness has no obvious influence on the crack initiation and extension as well as the fracture arrest; (5)both the effective time of gas-driven and the fracture are longer as the rate of pressure rise is smaller, but its change has nearly no impact on the pressure of the fracture initiation and arrest.
- mechanices of explosion /
- fracture initiation and extension /
- numerical coupled solution /
- compound perforation /
- gas pressure distribution in fracture /
- fracture arrest

HTML全文

图 1 缝内气体压力分布的2种情况

Figure 1. Gas pressure distribution in fracture of two different types

下载: 全尺寸图片幻灯片

图 2 缝口气体压力与爆燃气体温度随时间的变化

Figure 2. Gas pressure at the inlet and gas temperature varied with time

下载: 全尺寸图片幻灯片

图 3 缝内气体压力分布随时间的变化

Figure 3. Gas pressure distribution in fracture versus time

下载: 全尺寸图片幻灯片

图 4 不同地应力下裂缝长度随时间的变化

Figure 4. Fracture length versus time for various in-situ stresses

下载: 全尺寸图片幻灯片

图 5 不同初始裂缝长度下裂缝长度随时间的变化

Figure 5. Fracture length varied with time for various initial crack lengths

下载: 全尺寸图片幻灯片

图 6 不同岩石断裂韧性下裂缝长度随时间的变化

Figure 6. Fracture length with time for various fracture toughnesses

下载: 全尺寸图片幻灯片

图 7 不同升压速率下缝口气体压力随时间的变化

Figure 7. Gas pressure at the inlet with varied time at various rates of pressure rise

下载: 全尺寸图片幻灯片

图 8 不同升压速率下裂缝长度随时间的变化

Figure 8. Fracture lengths varied with time at various rates of pressure rise

下载: 全尺寸图片幻灯片

表 1 不同地应力下的裂缝扩展情况

Table 1. Fracture extension under different in-situ stresses

σ/MPa	t_i/ms	p_i/MPa	t_a/ms	p_a/MPa	L/m
22	22.3	24.17	157.2	23.61	4.93
25	23.8	27.22	131.8	26.78	3.85
28	25.4	30.47	112.0	30.22	2.93

下载: 导出CSV

表 2 不同初始裂缝长度下的裂缝扩展情况

Table 2. Fracture extension under differentinitial crack lengths

L₀/m	t_i/ms	p_i/MPa	t_a/ms	p_a/MPa	L/m
0.10	24.3	28.23	130.3	26.98	3.53
0.45	23.8	27.22	131.8	26.78	3.85
1.00	23.7	27.02	133.5	26.55	4.31

下载: 导出CSV

表 3 不同岩石断裂韧性下的裂缝扩展情况

Table 3. Fracture extension under different fracture toughnesses

K_IC/(MPa·m^0.5)	t_i/ms	p_i/MPa	t_a/ms	p_a/MPa	L/m
0.5	23.8	27.22	131.8	26.78	3.85
1.0	24.1	27.83	130.2	26.99	3.82
2.0	24.7	29.05	128.7	27.20	3.76

下载: 导出CSV

表 4 不同升压速率下的裂缝扩展情况

Table 4. Fracture extension at different rates of pressure rise

v_p/(MPa·ms^-1)	t_i/ms	p_i/MPa	t_a/ms	p_a/MPa	L/m
1.70	23.8	27.22	131.8	26.78	3.85
1.22	27.5	27.22	161.7	26.65	4.39
0.92	31.4	27.22	185.4	26.50	4.83

下载: 导出CSV

参考文献(16)

[1]	李克明, 张曦.高能复合射孔技术及应用[J].石油勘探与开发, 2002, 29(5): 91-92. doi: 10.3321/j.issn:1000-0747.2002.05.030 Li Ke-ming, Zhang Xi. High energy combined perforation technique and its application[J]. Petroleum Exploration and Development, 2002, 29(5): 91-92. doi: 10.3321/j.issn:1000-0747.2002.05.030
[2]	孙新波, 刘辉, 王宝兴, 等.复合射孔技术综述[J].爆破器材, 2007, 36(5): 29-31. doi: 10.3969/j.issn.1001-8352.2007.05.010 Sun Xin-bo, Liu Hui, Wang Bao-xin, et al. Review of propellant perforation techniques[J]. Explosive Materials, 2007, 36(5): 29-31. doi: 10.3969/j.issn.1001-8352.2007.05.010
[3]	范天佑.断裂理论基础[M].北京: 科学出版社, 2003.
[4]	曹言光, 刘长松, 林平, 等.应用断裂力学理论建立油气井压裂时岩石破裂压力计算模型[J].西安石油学院学报:自然科学版, 2003, 18(4): 36-39. doi: 10.3969/j.issn.1673-064X.2003.04.010 Cao Yan-guang, Liu Chang-song, Lin Ping, et al. Establishing the models for calculating the fracturing pressure of formation rock during oil/gas wells fracturing by using fracture mechanics theory[J]. Journal of Xi'an Petroleum Institute: Natural Science Edition, 2003, 18(4): 36-39. doi: 10.3969/j.issn.1673-064X.2003.04.010
[5]	Nilson R H. Gas-driven fracture propagation[J]. Journal of Applied Mechanics, 1981, 48(4): 757-762. doi: 10.1115/1.3157729
[6]	Nilson R H, Griffiths S K. Numerical analysis of hydraulically-driven fractures[J]. Computer Methods in Applied Mechanics and Engineering, 1983, 36(3): 359-370. doi: 10.1016/0045-7825(83)90129-9
[7]	Nilson R H, Proffer W J, Duff R E. Modeling of gas-driven fractures induced by propellant combustion within a borehole[J]. International Journal of Rock Mechanics and Mining Sciences, 1985, 22(1): 3-19.
[8]	Nilson R H. An integral method for predicting hydraulic fracture propagation driven by gasses or liquids[J]. International Journal for Numerical and Analytical Methods in Geomechanics, 1986, 10(2): 191-211. doi: 10.1002/nag.1610100207
[9]	Petitjean L, Couet B. Modeling of gas-driven fracture propagation for oil and gas stimulation[C]//SPE28084, Rock Mechanics in Petroleum Engineering. Delft, Netherlands, 1994.
[10]	Yang D W, Risnes R. Numerical modelling and parametric analysis for designing propellant gas fracturing[C]//SPE71641, SPE Annual Technical Conference and Exhibition. New Orleans, Louisiana, 2001.
[11]	王家来, 刘积铭.岩石爆破破岩机理的损伤力学分析[J].岩石力学与工程学报, 1996, 15(增刊): 515-518. Wang Jia-lai, Liu Ji-ming. Damage analysis on rock blasting mechanism[J]. Chinese Journal of Rock Mechanics and Engineering, 1996, 15(suppl): 515-518.
[12]	杨小林, 王梦恕.爆生气体作用下岩石裂纹的扩展机理[J].爆炸与冲击, 2001, 21(2): 111-116. doi: 10.3321/j.issn:1001-1455.2001.02.005 Yang Xiao-lin, Wang Meng-shu. Mechanism of rock crack growth under detonation gas loading[J]. Explosion and Shock Waves, 2001, 21(2): 111-116. doi: 10.3321/j.issn:1001-1455.2001.02.005
[13]	陈莉静, 李宁, 王俊奇.高能复合射孔爆生气体作用下预存裂缝起裂扩展研究[J].石油勘探与开发, 2005, 32(6): 91-94. doi: 10.3321/j.issn:1000-0747.2005.06.022 Chen Li-jing, Li Ning, Wang Jun-qi. Initiation and extension of existing cracks under detonation gas loading in a high energy combined perforation[J]. Petroleum Exploration and Development, 2005, 32(6): 91-94. doi: 10.3321/j.issn:1000-0747.2005.06.022
[14]	陈莉静, 李宁, 王俊奇.油井爆生气体对岩石劈裂作用机制探索[J].岩石力学与工程学报, 2006, 25(11): 2369-2372. doi: 10.3321/j.issn:1000-6915.2006.11.031 Chen Li-jing, Li Ning, Wang Jun-qi. Approximative analysis of fracture propagation driven by detonation gas in oil well[J]. Chinese Journal of Rock Mechanics and Engineering, 2006, 25(11): 2369-2372. doi: 10.3321/j.issn:1000-6915.2006.11.031
[15]	李宁, 陈莉静, 张平.爆生气体驱动岩石裂缝动态扩展分析[J].岩土工程学报, 2006, 28(4): 460-463. doi: 10.3321/j.issn:1000-4548.2006.04.007 Li Ning, Chen Li-jing, Zhang Ping. Dynamic analysis for fracturing progress by detonation gas[J]. Chinese Journal of Geotechnical Engineering, 2006, 28(4): 460-463. doi: 10.3321/j.issn:1000-4548.2006.04.007
[16]	Petitjean L, Couet B. Modeling of fracture propagation during overbalanced perforating[C]//SPE28560, SPE Annual Technical Conference and Exhibition. New Orleans, Louisiana, 1994.