RDX基PBX的做功能力及JWL状态方程参数确定

王新颖 王树山 徐豫新 胡赛

王新颖, 王树山, 徐豫新, 胡赛. RDX基PBX的做功能力及JWL状态方程参数确定[J]. 爆炸与冲击, 2016, 36(2): 242-247. doi: 10.11883/1001-1455(2016)02-0242-06
引用本文: 王新颖, 王树山, 徐豫新, 胡赛. RDX基PBX的做功能力及JWL状态方程参数确定[J]. 爆炸与冲击, 2016, 36(2): 242-247. doi: 10.11883/1001-1455(2016)02-0242-06
Wang Xinying, Wang Shushan, Xu Yuxin, Hu Sai. Power capability and parameters of JWL equation of state for RDX-based PBX[J]. Explosion And Shock Waves, 2016, 36(2): 242-247. doi: 10.11883/1001-1455(2016)02-0242-06
Citation: Wang Xinying, Wang Shushan, Xu Yuxin, Hu Sai. Power capability and parameters of JWL equation of state for RDX-based PBX[J]. Explosion And Shock Waves, 2016, 36(2): 242-247. doi: 10.11883/1001-1455(2016)02-0242-06

RDX基PBX的做功能力及JWL状态方程参数确定

doi: 10.11883/1001-1455(2016)02-0242-06
详细信息
    作者简介:

    王新颖(1980—),女,博士研究生,讲师,wxy801003@163.com

  • 中图分类号: O381

Power capability and parameters of JWL equation of state for RDX-based PBX

  • 摘要: 为研究RDX基PBX炸药的做功能力并确定其爆轰产物的JWL状态方程参数,对RDX基PBX炸药和TNT炸药进行∅50 mm标准圆筒实验,获得了圆筒膨胀位移和速度的时程曲线,对比得出RDX基PBX炸药的做功能力明显高于TNT炸药;基于能量守恒对实验数据进行非线性拟合,得到2种炸药爆轰产物的JWL状态方程参数。TNT炸药的拟合参数和通过AUTODYN软件计算得到的结果符合较好;将采用上述方法得到的RDX基PBX炸药爆轰产物JWL状态方程参数用于数值模拟,计算结果与实验值吻合较好,符合数值模拟标定JWL状态方程参数的要求。
  • 图  1  圆筒实验装置图

    Figure  1.  Equipment diagram of the cylinder test

    图  2  圆筒壁膨胀过程原始扫描底片

    Figure  2.  Scanning films showing expansion process of cylindrical wall

    图  3  不同炸药驱动下圆筒壁膨胀距离时程曲线

    Figure  3.  Radial expansion displacement of cylindrical wall generated by different explosives

    图  4  不同炸药驱动下圆筒壁膨胀速度时程曲线

    Figure  4.  Radial expansion velocity of cylindrical wall generated by different explosives

    图  5  不同炸药驱动下圆筒壁u-V曲线和Ek(V)-V曲线

    Figure  5.  u-V and Ek(V)-V curves of cylindrical wall generated by different explosives

    图  6  数值模拟的几何模型

    Figure  6.  Geometry model of simulation

    图  7  RDX基PBX炸药圆筒实验的数值模拟与实验结果比较

    Figure  7.  Cylinder test results of RDX-based PBX explosive compared with numerical simulation

    表  1  圆筒壁膨胀位移曲线拟合系数

    Table  1.   Fitting parameters for radial expansion displacement curve of cylindrical wall

    炸药 vs/(mm·μs-1) τs/μs vg/(mm·μs-1) τ1/μs τ2/μs
    TNT 0.684 66 0.370 31 0.102 67 1.350 37 7.772 72
    RDX-based PBX 0.868 95 0.186 85 0.118 26 0.839 37 7.610 43
    下载: 导出CSV

    表  2  破片初速及炸药格尼系数

    Table  2.   Initial velocity of fragment and Gurney coefficient of explosive

    炸药 v0/(m·s-1) $\sqrt{2 E} $/(m·s-1)
    TNT 1 311 2 270.7
    RDX-based PBX 1 630 2 749.2
    下载: 导出CSV

    表  3  爆轰产物的JWL状态方程参数

    Table  3.   Parameters in JWL state equation of detonation product

    炸药 A/GPa B/GPa C/GPa R1 R2 ω
    RDX-based PBX 522.8 8.500 1.065 4.20 1.00 0.36
    TNT(Origin) 363.5 3.600 0.988 4.10 0.99 0.26
    TNT(AUTODYN) 371.2 3.231 1.045 4.15 0.95 0.30
    下载: 导出CSV
  • [1] 孙国祥.高分子混合炸药[M].北京:国防工业出版社, 1985:3-4.
    [2] 孙华, 郭志军.PBX炸药技术特性及在水中兵器上的应用[J].装备指挥技术学院学报, 2009, 20(3):108-111. doi: 10.3783/j.issn.1673-0127.2009.03.025

    Sun Hua, Guo Zhijun. Characteristics of PBX dynamite and its application in undersea weaponry[J]. Journal of the Academy of Equipment Command & Technology, 2009, 20(3):108-111. doi: 10.3783/j.issn.1673-0127.2009.03.025
    [3] 孙业兵, 曹新茂.军用混合炸药[M].北京:兵器工业出版社, 1995:10-11.
    [4] Lee E L, Hornig H C, Kury J W. Adiabatic expansion of high explosive detonation products: UCRL-50422[R]. San Francisco: University of California, 1968.
    [5] Kury J W, Hornig H C, Lee E L. Metal acceleration by chemical explosives[C]//Proceedings of 4th Symposium on Detonation. White Oak, Maryland, 1965: 3-13.
    [6] 陈清畴, 蒋小华, 李敏, 等.RDX基高聚物黏结炸药JWL状态方程[J].含能材料, 2011, 19(2):213-216. doi: 10.3969/j.issn.1006-9941.2011.02.020

    Chen Qingchou, Jiang Xiaohua, Li Min, et al. JWL equation of state for RDX based PBX[J]. Chinese Journal of Energetic Materials, 2011, 19(2):213-216. doi: 10.3969/j.issn.1006-9941.2011.02.020
    [7] 谭凯元, 韩勇, 罗观, 等.HMX基PBX的作功能力及其JWL状态方程[J].火炸药学报, 2013, 36(3):42-45. doi: 10.3969/j.issn.1007-7812.2013.03.010

    Tan Kaiyuan, Han Yong, Luo Guan, et al. Power ability and JWL equation of state of a HMX-based PBX[J]. Chinese Journal of Explosives & Propellant, 2013, 36(3):42-45. doi: 10.3969/j.issn.1007-7812.2013.03.010
    [8] 沈飞, 王辉, 袁建飞.一种确定JWL状态方程参数的简易算法[J].振动与冲击, 2013, 33(9):107-110. http://d.old.wanfangdata.com.cn/Periodical/zdycj201409019

    Shen Fei, Wang Hui, Yuan Jianfei. A simple method for determining parameters of JWL EOS[J]. Journal of Vibration and Shock, 2013, 33(9):107-110. http://d.old.wanfangdata.com.cn/Periodical/zdycj201409019
    [9] Lindsay C M, Butler G C, Rumchik C G. Increasing the utility of the copper cylinder expansion test[J]. Propellants, Explosives, Pyrotechnics, 2010, 35(5):433-439. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=fae93ed5e0fd225a03c3586e5d7b8bb1
    [10] Gurney G W. The initial velocities of fragments from bombs, shells and grenades[R]. Army Ballistic Research Laboratory, 1943.
    [11] 王新颖, 王树山, 徐豫新, 等.爆轰驱动金属圆筒的能量转换与破片初速模型[J].兵工学报, 2015, 36(8):1417-1422. doi: 10.3969/j.issn.1000-1093.2015.08.007

    Wang Xinying, Wang Shushan, Xu Yuxin, et al. The energy conversion and fragment initial velocity model of metal cylinder driven by detonation[J]. Acta Armamentarii, 2015, 36(8):1417-1422. doi: 10.3969/j.issn.1000-1093.2015.08.007
    [12] 方安平.Origin 8.0实用指南[M].北京:机械工业出版社, 2009.
    [13] 韩勇, 黄辉, 黄毅民, 等.含铝炸药圆筒试验与数值模拟[J].火炸药学报, 2009, 32(4):14-17. doi: 10.3969/j.issn.1007-7812.2009.04.004

    Han Yong, Huang Hui, Huang Yimin, et al. Cylinder test of aluminized explosives and its numerical simulation[J]. Chinese Journal of Explosives & Propellants, 2009, 32(4):14-17. doi: 10.3969/j.issn.1007-7812.2009.04.004
  • 加载中
图(7) / 表(3)
计量
  • 文章访问数:  6756
  • HTML全文浏览量:  2503
  • PDF下载量:  1430
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-11-18
  • 修回日期:  2015-03-10
  • 刊出日期:  2016-03-25

目录

    /

    返回文章
    返回