火炮立楔式炮闩抽筒系统的动态特性

胡胜海; 张满慧; 富威; 刘秀莲

doi:10.11883/1001-1455(2017)02-0221-08

火炮立楔式炮闩抽筒系统的动态特性

哈尔滨工程大学机电工程学院, 黑龙江哈尔滨 150001

基金项目:

国家自然科学基金项目 51175099

详细信息

作者简介:
胡胜海(1954—)，男，教授，博士生导师

通讯作者:
张满慧，zhangmanhui@hrbeu.edu.cn

中图分类号: O389;O313

计量

文章访问数: 4717
HTML全文浏览量: 2669
PDF下载量: 362
被引次数: 4

Dynamic characteristics of extractor system in artillery vertical wedge breechblock

College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, Heilongjiang, China

摘要: 针对火炮立楔式炮闩抽筒系统中的卡壳和构件动态断裂等抽筒故障，以动力学理论为基础，将其转化为系统动态特性的定量研究。分析了抽筒系统的工作机理并建立了连续接触动力学模型，定量地推导出药筒及系统内接触构件的运动规律和碰撞载荷。建立了杠杆式抽筒子在抽筒过程中的弹性波动模型，采用该模型能够定量地得出抽筒子的动应力分布和力学参数的影响。进行了理想抽筒工况下理论模型的数值计算和实体模型的仿真模拟，同组比较结果验证了定量分析模型的合理性。所建模型可为解决抽筒故障提供理论依据，也可为抽筒系统的动力学和结构优化设计作铺垫。

关键词:

Abstract: Aimed at the faults such as cartridge jamming and component dynamic fracture in the extractor system of an artillery vertical wedge breechblock, this paper was focused on transforming the extracting fault analysis to the quantitative study of the system dynamic characteristics based on the nonlinear dynamics theory. The working mechanism of the extractor system was analyzed firstly, and then a continuous contact dynamics model was established for deriving out the motion law of any components and the impact loads quantificationally during the extraction process. Moreover, the elastic wave model of the lever-type extractor was established, which can both describe the dynamic stress distribution and achieve the influences of the mechanical parameters of the extractor by the quantitative form. The numerical calculation of those theoretical models and the simulations of the virtual prototype were both conducted on the ideal extracting condition. The comparison results of the same group show that the quantitative analysis dynamic models are reasonable and effective, which provides a theoretical basis for the solution of the extracting fault and the dynamics optimization of the extractor system.

Key words:

[1]	谈乐斌, 张相炎.火炮概论[M].北京:北京理工大学出版社, 2005:378-396.
[2]	侯保林, 钱林方, 于子平.大口径火炮抽筒故障分析[J].弹道学报, 2002, 14(2):52-56. doi: 10.3969/j.issn.1004-499X.2002.02.011 Hou Baolin, Qian Linfang, Yu Ziping. Failure analysis for the breech mechanism of a big caliber howitzer[J]. Journal of Ballistics, 2002, 14(2):52-56. doi: 10.3969/j.issn.1004-499X.2002.02.011
[3]	傅建平, 宋明明, 吕世乐, 等.火炮抽筒故障机理研究[J].军械工程学院学报, 2013, 25(4):20-23. doi: 10.3969/j.issn.1008-2956.2013.04.005 Fu Jianping, Song Mingming, Lü Shile, et al. Research on the fault principle analysis of artillery extraction cartridge[J]. Journal of Ordnance Engineering College, 2013, 25(4):20-23. doi: 10.3969/j.issn.1008-2956.2013.04.005
[4]	卓晓琪. 火炮抽壳系统的动态弹塑性分析[D]. 南京: 南京理工大学, 2002: 66-73. http://cdmd.cnki.com.cn/Article/CDMD-10288-2002052960.htm
[5]	杜中华, 王兴贵, 马吉胜.基于虚拟样机技术的某型火炮开闩过程动力学特性研究[J].机械工程学报, 2004, 40(6):123-126. doi: 10.3321/j.issn:0577-6686.2004.06.024 Du Zhonghua, Wang Xinggui, Ma Jisheng. Research on gun's breech-opening process dynamic characteristics based on prototype technology[J]. Chinese Journal of Mechanical Engineering, 2004, 40(6):123-126. doi: 10.3321/j.issn:0577-6686.2004.06.024
[6]	杨艳峰, 郑坚, 狄长春, 等.基于虚拟样机技术的火炮炮闩冲击试验台理论设计[J].振动与冲击, 2014, 33(15):180-183. http://d.old.wanfangdata.com.cn/Periodical/zdycj201415032 Yang Yanfeng, Zheng Jian, Di Changchun, et al. Theoretical design of shock test bed for a gun breech based on virtual prototype technology[J]. Journal of Vibration and Shock, 2014, 33(15):180-183. http://d.old.wanfangdata.com.cn/Periodical/zdycj201415032
[7]	张建, 唐文献, 徐省省, 等.火炮炮闩抽筒子结构优化设计[J].兵工学报, 2012, 33(6):647-651. http://d.old.wanfangdata.com.cn/Periodical/bgxb201206002 Zhang Jian, Tang Wenxian, Xu Xingxing, et al. Structural optimization design for breechblock extractor[J]. Acta Armamentarii, 2012, 33(6):647-651. http://d.old.wanfangdata.com.cn/Periodical/bgxb201206002
[8]	Tang Wenxian, Zhang Jian, Zhang Pan. Cartridge-case extracting analysis of some breech mechanism based on flexible body dynamics method[J]. Applied Mechanics and Materials, 2011, 43(10):338-341. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=10.4028/www.scientific.net/AMM.43.338
[9]	良青历.卫国功臣中国1956年式85毫米加农炮[J].现代兵器, 2010, 7:19-26. http://www.cnki.com.cn/Article/CJFDTotal-XDBQ201007011.htm Liang Qingli. Patriotic hero: China 1956 type 85mm cannon[J]. Modern Weapons, 2010, 7:19-26. http://www.cnki.com.cn/Article/CJFDTotal-XDBQ201007011.htm
[10]	洪嘉振.计算多体系统动力学[M].北京:高等教育出版社, 1999:67-73.
[11]	Schindler T, Acary V. Timestepping schemes for nonsmooth dynamics based on discontinuous Galerkin methods: Definition and outlook[J]. Mathematics and Computers in Simulation, 2014, 95(1):180-199. http://dl.acm.org/citation.cfm?id=2561795
[12]	Song P, Kraus P, Kumar V, et al. Analysis of rigid-body dynamic models for simulation of systems with frictional contacts[J]. Journal of Applied Mechanics, 2001, 68(1):118-128. doi: 10.1115/1.1331060
[13]	鲍亦兴, 毛昭宙. 弹性波的衍射与动应力集中[M]. 刘殿魁, 苏先诞, 译. 北京: 科学出版社, 1993: 27-41.
[14]	赵嘉喜, 刘殿魁, 齐辉, 等.弯曲波对含多圆孔薄板的散射与动应力集中[J].爆炸与冲击, 2008, 28(6):552-556. doi: 10.3321/j.issn:1001-1455.2008.06.012 Zhao Jiaxi, Liu Diankui, Qi Hui, et al. Dynamic stress concentration in multi-cutouts-contained thin plates subjected to flexural waves[J]. Explosion and Shock Waves, 2008, 28(6):552-556. doi: 10.3321/j.issn:1001-1455.2008.06.012
[15]	顾克秋, 钱林方, 常秀英, 等.大口径火炮焊接药筒射击变形机理的启发式反演[J].爆炸与冲击, 2004, 24(6):553-557. doi: 10.3321/j.issn:1001-1455.2004.06.014 Gu Keqiu, Qian Linfang, Chang Xiuying, et al. Heuristic inversion of deforming mechanism in firing of welded steel cartridge case of large caliber cannon[J]. Explosion and Shock Waves, 2004, 24(6):553-557. doi: 10.3321/j.issn:1001-1455.2004.06.014
[16]	Duru K, Kreiss G. A well-posed and discretely stable perfectly matched layer for elastic wave equations in second order formulation[J]. Communications in Computational Physics, 2012, 11(5):1643-1672. doi: 10.4208/cicp.120210.240511a