Constitutive equation of expanding cylindrical shell at constant strain rate
-
摘要: 考虑到金属柱壳膨胀过程中随机裂纹萌生对测试结果的可能干扰，设计了预置有中心穿透圆孔的柱壳样品，采用多普勒光纤探针测量系统获得了柱壳外壁更优的径向速度历史。基于膨胀柱壳实验中固有的非恒定应变率现象，研究了获得恒定应变率下本构方程的方法，并采用改进后的本构方程确定方法，获得了20钢恒定应变率下的应力应变关系。Abstract: In this work, taking into account of the interference of random cracks in the expansion process, we designed a cylindrical sample made with a preset hole. Then, using the Doppler pins system (DPS), we obtained some better curves for the cylinder's radial speed histories. Based on the non-constant strain rate phenomena in the expanding ring and expanding cylinder experiments, we conducted experiments and studied a method for obtaining constitutive equation at constant strain rate. The improved constitutive equation method was used to obtain the modified constitutive equation at constant strain rate for 20 steel.
-
图 2 膨胀柱壳典型的速度、应变率随时间的变化曲线
Figure 2. Curves for typical velocity and strain rate of expanding cylinder
图 3 新型爆炸膨胀柱壳实验装置及实验测试布局示意图
Figure 3. Schematic illustration of explosive expanding cylinder test
图 4 20钢柱壳径向速度曲线
Figure 4. Velocity along radial direction of 20 steel expanding cylinder
图 7 应力应变曲线及恒定应变率数据点分布
Figure 7. Curve of stress vs. strain and distribution of constant strain rate dates
表 1 20钢柱壳膨胀断裂实验参数
Table 1. Experimental parameters of 20 steel expanding cylinders
实验号 材料 r/mm R/mm h/mm D/mm m/g ρ/(g·cm-3) 1 20钢 40.0 42.0 30.0 10.00 4.84 1.100 2 20钢 40.0 42.0 30.0 11.94 7.25 1.156 3 20钢 40.0 42.0 30.0 11.98 7.25 1.149 4 20钢 40.0 42.0 30.0 14.00 9.77 1.133 
下载: 导出CSV
-
[1] Johnson P C, Stein B A, Davis R S. Measurement of dynamic plastic flow properties under uniform stress[C]//Symposium on the Dynamic Behavior of Materials. ASTM Special Publication, 1963: 195-198. [2] Hiroe T, Matsuo H, Fujiwara K, et al. Dynamic behavior of materials induced by explosive loadings initiated using wire explosion techniques[J]. Journal of Materials Processing Technology, 1999, 85(1/3):56-59. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=7ae983244d308a749001df971576f3a9 [3] Hiroe T, Fujiwara K, Hata H, et al. Deformation and fragmentation behavior of exploded metal cylinders and the effects of wall materials, configuration, explosive energy and initiated locations[J]. International Journal of Impact Engineering, 2008, 35(12):1578-1586. doi: 10.1016/j.ijimpeng.2008.07.002 [4] 汤铁钢, 李庆忠, 陈永涛, 等.实现材料高应变率拉伸加载的爆炸膨胀环技术[J].爆炸与冲击, 2009, 29(5):546-549. doi: 10.3321/j.issn:1001-1455.2009.05.017Tang Tiegang, Li Qingzhong, Chen Yongtao, et al. An improved technique for dynamic tension of metal ring by explosive loading[J]. Explosion and Shock Waves, 2009, 29(5):546-549. doi: 10.3321/j.issn:1001-1455.2009.05.017 [5] 汤铁钢, 桂毓林, 李庆忠, 等.爆炸膨胀环实验数据处理方法讨论[J].爆炸与冲击, 2010, 30(5):505-510. doi: 10.11883/1001-1455(2010)05-0505-06Tang Tiegang, Gui Yulin, Li Qingzhong, et al. A discussion of data processing techniques for expanding ring tests[J]. Explosion and Shock Waves, 2010, 30(5):505-510. doi: 10.11883/1001-1455(2010)05-0505-06 [6] 汤铁钢, 李庆忠, 刘仓理, 等.爆炸膨胀环的截面尺寸效应[J].爆炸与冲击, 2010, 30(1):39-44. http://www.bzycj.cn/cn/searchTang Tiegang, Li Qingzhong, Liu Cangli, et al. Size effects of expanding ring by explosive loading[J]. Explosion and Shock Waves, 2010, 30(1):39-44. http://www.bzycj.cn/cn/search [7] 汤铁钢, 李庆忠, 陈永涛, 等.爆炸膨胀环一维应力假定的分析与讨论[J].爆炸与冲击, 2010, 30(6):577-582. doi: 10.11883/1001-1455(2010)06-0577-06Tang Tiegang, Li Qingzhong, Chen Yongtao, et al. Discussion about one-dimensional stress presume for explosion expanding ring test[J]. Explosion and Shock Waves, 2010, 30(6):577-582. doi: 10.11883/1001-1455(2010)06-0577-06 [8] Warnes R H, Karpp R R, Follansbee P S. The freely expanding ring test-A test to determine material strength at high strain rates[J]. Journal De Physiques IV, 1985, 46(C5):583-590. http://cn.bing.com/academic/profile?id=17e2684ddf908a2d6fe6bbf5f23b543b&encoded=0&v=paper_preview&mkt=zh-cn [9] 宋力, 胡时胜.SHPB测试中的均匀性问题及恒应变率[J].爆炸与冲击, 2005, 25(3):207-216. doi: 10.3321/j.issn:1001-1455.2005.03.003Song Li, Hu Shisheng. Stress uniformity and constant strain rate in SHPB test[J]. Explosion and Shock Waves, 2005, 25(3):207-216. doi: 10.3321/j.issn:1001-1455.2005.03.003 [10] 奥尔连科.爆炸物理学[M].孙承纬, 译.北京: 科学出版社, 2011: 822-825. [11] Grady D E, Kipp M E. The growth of unstable thermoplastic shear with application to steady-wave shock compression in solids[J]. Journal of the Mechanics and Physics of Solids, 1987, 35(1):95-119. doi: 10.1016/0022-5096(87)90030-5 [12] Grady D E. Fragmentation of Rings and Shells: The Legacy of N. F. Mott[M]. New York: Springer, 2006. [13] 刘旭红, 黄西成, 陈裕泽, 等.强动载荷下金属材料塑性变形本构模型评述[J].力学进展, 2007, 37(3):361-374. doi: 10.3321/j.issn:1000-0992.2007.03.004Liu Xuhong, Huang Xicheng, Cheng Yuze, et al. A review on constitutive models for plastic deformation of metal materials under dynamic loadings[J]. Advances in Mechanics, 2007, 37(3):361-374. doi: 10.3321/j.issn:1000-0992.2007.03.004 -
计量
- 文章访问数: 4579
- HTML全文浏览量: 1178
- PDF下载量: 407
- 被引次数: 0