冲击载荷下径向密度排布对泡沫金属力学性能影响的研究

王根伟; 刘冕; 宋辉; 王彬

doi:10.11883/bzycj-2019-0403

冲击载荷下径向密度排布对泡沫金属力学性能影响的研究

doi: 10.11883/bzycj-2019-0403

王根伟^{1, 2,},
刘冕^{1, 2},
宋辉^{1, 2},
王彬^{1, 3}

1.
太原理工大学机械与运载工程学院应用力学研究所，山西太原 030024
2.
太原理工大学材料强度与结构冲击山西省重点实验室，山西太原 030024
3.
伦敦布鲁内尔大学机械航空工程系，英国伦敦 UB8 3PH

基金项目: 国家自然科学基金（11872265）；山西省自然科学基金（201901D2111087）

详细信息

作者简介:
王根伟（1974－　），男，博士，副教授，gwang@tyut.edu.cn

中图分类号: O347.3
计量
- 文章访问数: 3693
- HTML全文浏览量: 1616
- PDF下载量: 106
- 被引次数: 0
出版历程
- 收稿日期: 2019-10-21
- 修回日期: 2020-02-08
- 网络出版日期: 2020-05-25
- 刊出日期: 2020-07-01

Influence of radial density arrangement on mechanical properties of metal foam under impact loading

WANG Genwei^{1, 2
,},
LIU Mian^{1, 2},
SONG Hui^{1, 2},
WANG Bin^{1, 3}

1.
Institute of Applied Mechanics, College of Mechanical and Vehicle Engineering, Taiyuan University of Technology,Taiyuan 030024, Shanxi, China
2.
Shanxi Key Laboratory of Material Strength & Structural Impact, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China
3.
Department of Mechanical and Aerospace Engineering, London Brunel University, London UB8 3PH, UK

摘要

摘要: 参照层状密度梯度泡沫模型实现方法，利用3D-Voronoi技术设计了新型径向密度梯度泡沫模型，并用有限元软件，对它在不同冲击载荷下的力学行为进行数值模拟。研究冲击速度、密度梯度和平均相对密度对金属泡沫冲击端、支撑端应力和能量吸收能力的影响，发现：径向正梯度泡沫与层状正、负梯度泡沫相比，其两端的应力值均较小，可同时保护冲击端、支撑端物体；径向负梯度泡沫两端应力变化幅度较小，能够保证物体受力稳定；几种泡沫金属的能量吸收能力在不同冲击速度下发生交替变化。对于径向梯度泡沫，能量吸收能力对密度梯度大小不敏感，对梯度方向敏感，径向负梯度泡沫的能量吸收能力始终大于径向正梯度泡沫；平均相对密度越大，径向正、负梯度泡沫两端应力越大、吸能效果越好。
- 梯度泡沫金属 /
- 3D-Voronoi技术 /
- 密度梯度参数 /
- 能量吸收
Abstract: Based on the generation method of layered density graded foam, new radial density graded foam models were designed by 3D-Voronoi technique, and their mechanical behavior under different impact loads was numerically simulated by finite element software. By analyzing the effects of impact velocity, density gradient and average relative density on the stress of impact end and support end, and energy absorption capacity of metal foams, it is found that the radial positive graded foam has smaller stress values at both ends than the layered positive and negative graded foams, which can simultaneously protect objects at any ends. The stress fluctuation of radial negative graded foam is small, which can ensure the stability of the force received by the object, and the energy absorption values of four metal foams vary alternately at different impact velocities. For the radial graded foam, energy absorption capacity is insensitive to density gradient, but sensitive to gradient direction. The energy absorption capacity of radial negative graded foam is always greater than radial positive graded foam. The larger the average relative density, the greater the stress at both ends, and the energy absorption effect is also enhanced.
- graded metal foam /
- 3D-Voronoi technique /
- density gradient parameter /
- energy absorption

HTML全文

图 1 密度梯度泡沫模型

Figure 1. Density gradient foam models

下载: 全尺寸图片幻灯片

图 2 层状和径向的梯度泡沫

Figure 2. Layered and radial graded foams

下载: 全尺寸图片幻灯片

3 应变云图

3. Strain distributions

下载: 全尺寸图片幻灯片

图 4 4种梯度泡沫冲击端和支撑端的名义应力应变曲线

Figure 4. Nominal stress-strain curves of impact end and support end of four graded foams

下载: 全尺寸图片幻灯片

图 5 4种梯度泡沫冲击端和支撑端的最大应力和应力标准差

Figure 5. Maximum stresses and stress standard deviations of impact end and support end of four graded foams

下载: 全尺寸图片幻灯片

图 6 不同冲击速度下4种梯度泡沫的能量吸收能力

Figure 6. Energy absorption capacities of four graded foams at different impact velocities

下载: 全尺寸图片幻灯片

图 7 在不同密度梯度下径向梯度泡沫的名义应力应变曲线

Figure 7. Nominal stress-strain curves of radial graded foams with different density gradients

下载: 全尺寸图片幻灯片

图 8 在不同密度梯度下径向梯度泡沫的能量吸收能力

Figure 8. Energy absorption capacities of radial graded foams with different density gradients

下载: 全尺寸图片幻灯片

图 9 在不同相对密度下径向梯度泡沫的名义应力应变曲线

Figure 9. Nominal stress-strain curves of radial graded foams with different relative densities

下载: 全尺寸图片幻灯片

10 在不同相对密度下径向梯度泡沫的能量吸收特性

10. Energy absorption per mass of radial graded foams with different relative densities

下载: 全尺寸图片幻灯片

表 1 模型材料参数

Table 1. Model material parameters

泡沫模型	平均相对密度$\overline\mu $	密度梯度γ
层状正梯度	0.12	0.8
层状负梯度	0.12	−0.8
径向正梯度	0.12, 0.09	0.8, 0.4
径向负梯度	0.12, 0.09	−0.8, −0.4

下载: 导出CSV

表 2 4种梯度泡沫的能量吸收能力

Table 2. Energy absorption capacities of four graded foams

泡沫模型	W/MPa
	v=30 m/s			v=80 m/s			v=200 m/s
	$\overline\varepsilon $=0.2	$\overline\varepsilon $=0.5	$\overline\varepsilon $=0.8	$\overline\varepsilon $=0.2	$\overline\varepsilon $=0.5	$\overline\varepsilon $=0.8	$\overline\varepsilon $=0.2	$\overline\varepsilon $=0.5	$\overline\varepsilon $=0.8
层状正梯度	0.55	1.98	4.22	0.82	2.73	5.36	2.36	7.18	13.51
层状负梯度	0.73	1.96	4.24	1.72	3.14	4.78	4.41	9.43	12.67
径向正梯度	0.62	2.00	3.97	1.00	3.06	4.91	2.84	8.34	12.63
径向负梯度	0.91	2.25	4.22	1.35	3.14	5.36	3.74	8.60	13.89

下载: 导出CSV

参考文献(28)

[1]	BEALS J T, THOMPSON M S. Density gradient effects on aluminium foam compression behaviour [J]. Journal of Materials Science, 1997, 32(13): 3595–3600. DOI: 10.1023/A:1018670111305.
[2]	GUPTA N. A functionally graded syntactic foam material for high energy absorption under compression [J]. Materials Letters, 2007, 61(4−5): 979–982. DOI: 10.1016/j.matlet.2006.06.033.
[3]	BROTHERS A H, DUNAND D C. Mechanical properties of a density-graded replicated aluminum foam [J]. Materials Science and Engineering: A, 2008, 489(1−2): 439–443. DOI: 10.1016/j.msea.2007.11.076.
[4]	BRUCK H A. A one-dimensional model for designing functionally graded materials to manage stress waves [J]. International Journal of Solids and Structures, 2000, 37(44): 6383–6395. DOI: 10.1016/S0020-7683(99)00236-X.
[5]	AJDARI A, CANAVAN P, NAYEB-HASHEMI H, et al. Mechanical properties of functionally graded 2-D cellular structures: a finite element simulation [J]. Materials Science and Engineering: A, 2009, 499(1−2): 434–439. DOI: 10.1016/j.msea.2008.08.040.
[6]	ZHANG J J, WEI H, WANG Z H, et al. Dynamic crushing of uniform and density graded cellular structures based on the circle arc model [J]. Latin American Journal of Solids and Structures, 2015, 12(6): 1102–1125. DOI: 10.1590/1679-78251630.
[7]	LIANG M Z, ZHANG G D, LU F Y, et al. Blast resistance and design of sandwich cylinder with graded foam cores based on the Voronoi algorithm [J]. Thin-Walled Structures, 2017, 112: 98–106. DOI: 10.1016/j.tws.2016.12.016.
[8]	王根伟, 王江龙. 负梯度闭孔泡沫金属的力学性能分析 [J]. 固体力学学报, 2017, 38(1): 85–92. DOI: 10.19636/j.cnki.cjsm42-1250/o3.2017.01.008. WANG G W, WANG J L. Mechanical properties of closed-cell metal foam with negative density gradient under impact loading [J]. Chinese Journal of Solid Mechanics, 2017, 38(1): 85–92. DOI: 10.19636/j.cnki.cjsm42-1250/o3.2017.01.008.
[9]	DING Y Y, ZHENG Z J, WANG Y G, et al. Impact resistance and design of graded cellular cladding [J]. International Journal of Applied Mechanics, 2018, 10(10): 1850107. DOI: 10.1142/S1758825118501077.
[10]	LIU Y D, YU J L, ZHENG Z J, et al. A numerical study on the rate sensitivity of cellular metals [J]. International Journal of Solids and Structures, 2009, 46(22−23): 3988–3998. DOI: 10.1016/j.ijsolstr.2009.07.024.
[11]	MA G W, YE Z Q, SHAO Z S. Modeling loading rate effect on crushing stress of metallic cellular materials [J]. International Journal of Impact Engineering, 2009, 36(6): 775–782. DOI: 10.1016/j.ijimpeng.2008.11.013.
[12]	FAN J H, ZHANG J J, WANG Z H, et al. Dynamic crushing behavior of random and functionally graded metal hollow sphere foams [J]. Materials Science and Engineering: A, 2013, 561: 352–361. DOI: 10.1016/j.msea.2012.10.026.
[13]	CUI L, KIERNAN S, GILCHRIST M D. Designing the energy absorption capacity of functionally graded foam materials [J]. Materials Science and Engineering: A, 2009, 507(1−2): 215–225. DOI: 10.1016/j.msea.2008.12.011.
[14]	吴鹤翔, 刘颖. 梯度变化对密度梯度蜂窝材料力学性能的影响 [J]. 爆炸与冲击, 2013, 33(2): 163–168. DOI: 10.11883/1001-1455(2013)02-0163-06. WU H X, LIU Y. Influences of density gradient variation on mechanical performances of density-graded honeycomb materials [J]. Explosion and Shock Waves, 2013, 33(2): 163–168. DOI: 10.11883/1001-1455(2013)02-0163-06.
[15]	WANG X K, ZHENG Z J, YU J L. Crashworthiness design of density-graded cellular metals [J]. Theoretical and Applied Mechanics Letters, 2013, 3(3): 031001. DOI: 10.1063/2.1303101.
[16]	YANG J, WANG S L, ZHENG Z J, et al. Impact resistance of graded cellular metals using cell-based finite element models [J]. Key Engineering Materials, 2016, 703: 400–405. DOI: 10.4028/www.scientific.net/KEM.703.400.
[17]	CHEN D, KITIPORNCHAI S, YANG J. Dynamic response and energy absorption of functionally graded porous structures [J]. Materials & Design, 2018, 140: 473–487. DOI: 10.1016/j.matdes.2017.12.019.
[18]	LAN X K, FENG S S, HUANG Q, et al. Blast response of continuous-density graded cellular material based on the 3D Voronoi model [J]. Defence Technology, 2018, 14(5): 443–440. DOI: 10.1016/j.dt.2018.06.003.
[19]	常白雪, 郑志军, 赵凯, 等. 具有恒定冲击载荷的梯度泡沫金属材料设计 [J]. 爆炸与冲击, 2019, 39(4): 3–11. DOI: 10.11883/bzycj-2018-0431. CHANG B X, ZHENG Z J, ZHAO K, et al. Design of gradient foam metal materials with a constant impact load [J]. Explosion and Shock Waves, 2019, 39(4): 3–11. DOI: 10.11883/bzycj-2018-0431.
[20]	ZENG H B, PATTOFATTO S, ZHAO H, et al. Impact behaviour of hollow sphere agglomerates with density gradient [J]. International Journal of Mechanical Sciences, 2010, 52(5): 680–688. DOI: 10.1016/j.ijmecsci.2009.11.012.
[21]	AJDARI A, NAYEB-HASHEMI H, VAZIRI A. Dynamic crushing and energy absorption of regular, irregular and functionally graded cellular structures [J]. International Journal of Solids and Structures, 2011, 48(3−4): 506–516. DOI: 10.1016/j.ijsolstr.2010.10.018.
[22]	ZHANG X C, AN L Q, DING H M. Dynamic crushing behavior and energy absorption of honeycombs with density gradient [J]. Journal of Sandwich Structures & Materials, 2014, 16(2): 125–147. DOI: 10.1177/1099636213509099.
[23]	ZHENG J, QIN Q H, WANG T J. Impact plastic crushing and design of density-graded cellular materials [J]. Mechanics of Materials, 2016, 94: 66–78. DOI: 10.1016/j.mechmat.2015.11.014.
[24]	ZHU H X, WINDLE A H. Effects of cell irregularity on the high strain compression of open-cell foams [J]. Acta Materialia, 2002, 50(5): 1041–1052. DOI: 10.1016/S1359-6454(01)00402-5.
[25]	曹国剑, 张一思, 刘东戎, 等. 制备梯度多孔材料的方法: CN101418391A [P]. 2009-04-29.
[26]	李妍妍, 郑志军, 虞吉林, 等. 闭孔泡沫金属变形模式的有限元分析 [J]. 爆炸与冲击, 2014, 34(4): 464–470. DOI: 10.11883/1001-1455(2014)04-0464-07. LI Y Y, ZHENG Z J, YU J L, et al. Finite element analysis on deformation modes of closed-cell metallic foam [J]. Explosion and Shock Waves, 2014, 34(4): 464–470. DOI: 10.11883/1001-1455(2014)04-0464-07.
[27]	WANG J L, LI X, WANG G W. Deformation modes of the graded closed-cell foam under impact loading [C] // Proceedings of 2016 International Conference on Applied Mechanics, Electronics and Mechatronics Engineering. Beijing, 2016. DOI: 10.12783/dtetr/ameme2016/5803.
[28]	KOOISTRA G W, DESHPANDE V S, WADLEY H N G. Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium [J]. Acta Materialia, 2004, 52(14): 4229–4237. DOI: 10.1016/j.actamat.2004.05.039.