Reliability assessment for explosive initiator using virtual samples

HONG Dong-pao; ZHAO Yu; WEN Yu-quan

doi:10.11883/1001-1455(2009)06-0669-04

Volume 29 Issue 6

Sep. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2009 > 29(6): 669-672

HONG Dong-pao, ZHAO Yu, WEN Yu-quan. Reliability assessment for explosive initiator using virtual samples[J]. Explosion And Shock Waves, 2009, 29(6): 669-672. doi: 10.11883/1001-1455(2009)06-0669-04

Citation:

HONG Dong-pao, ZHAO Yu, WEN Yu-quan. Reliability assessment for explosive initiator using virtual samples[J]. Explosion And Shock Waves, 2009, 29(6): 669-672. doi: 10.11883/1001-1455(2009)06-0669-04

HONG Dong-pao, ZHAO Yu, WEN Yu-quan. Reliability assessment for explosive initiator using virtual samples[J]. Explosion And Shock Waves, 2009, 29(6): 669-672. doi: 10.11883/1001-1455(2009)06-0669-04

Citation:

PDF( 290 KB)

Reliability assessment for explosive initiator using virtual samples

doi: 10.11883/1001-1455(2009)06-0669-04

1.
Department of System Engineering of Engineering Technology, Beijing University of Aeronautics and Astronautics, Beijing 100191, China;
2.
State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China

Publish Date: 2009-11-25

Abstract

Abstract

In order to improve the reliability assessment of an explosive initiator with small samples, the up-down test was studied. And a new arithmetic was put forward to transform the binary data into virtual complete samples. The simulation result shows that the estimate of the scale parameter from the virtual samples is better than that from the binary data while the estimates of the location parameters are approximately the same. Then using the estimates, a reliability assessment method for explosive initiator based on fiducial inference was proposed. The method was used for the reliability assessment of one explosive initiator, and was compared with the run-down method.
- mechanics of explosion,
- reliability assessment,
- data filling,
- explosive initiator,
- virtual samples

FullText(HTML)

References(0)

References

Relative Articles

[1]	LI Linna, ZHONG Dongwang, HUANG Xiaowu, HE Li, SI Jianfeng, TU Shengwu. Reliability analysis of deepwater explosion test vessel based on dynamic prediction[J]. Explosion And Shock Waves, 2021, 41(1): 014901. doi: 10.11883/bzycj-2020-0078
[2]	WANG Ruobing, ZHAO Zhijun, XIAO Heye, CHEN Jiawen, JIANG Xiaolei. Reliability analysis and design optimization of a shear pin constrained by mechanical boundaries[J]. Explosion And Shock Waves, 2019, 39(7): 075101. doi: 10.11883/bzycj-2018-0146
[3]	Gao Na, Zhang Yansong, Hu Yiting. Experimental study on gas explosion hazard under different temperatures and pressures[J]. Explosion And Shock Waves, 2016, 36(2): 218-223. doi: 10.11883/1001-1455(2016)02-0218-06
[4]	Wang Dan, Yu Hai-jiang. Applications of experimental design in study of explosive network's reliability[J]. Explosion And Shock Waves, 2015, 35(2): 184-190. doi: 10.11883/1001-1455(2015)02-0184-07
[5]	Fan Jun-yu, Fang Qin, Chen Li, Zhang Ya-dong. Anti-blast properties of masonry infill walls[J]. Explosion And Shock Waves, 2014, 34(1): 59-66. doi: 10.11883/1001-1455(2014)01-0059-08
[6]	Qin Dong-ze, Fan Ning-jun. Security and reliability of a self-destructive device[J]. Explosion And Shock Waves, 2014, 34(1): 111-114. doi: 10.11883/1001-1455(2014)01-0111-04
[7]	Liu Ming, An Wei-guang, Song Xiang-hua, . Dynamic stability and reliability of a supercavitating projectile with stochastic parameters[J]. Explosion And Shock Waves, 2013, 33(5): 525-530. doi: 10.11883/1001-1455(2013)05-0525-06
[8]	LIU Wen-xiang, ZHANG De-zhi, ZHANG Xiang-rong, ZHU Yu-rong, TAN Shu-shun. Ballisticlimitofanaluminumfoam-filledshield[J]. Explosion And Shock Waves, 2012, 32(1): 43-46. doi: 10.11883/1001-1455(2012)01-0043-04
[9]	PAN Yong, JIANG Jun-Cheng, WANG Rui. Prediction of the lower flammability limits of hydrocarbons based on the quantitative structure-property relationship studies[J]. Explosion And Shock Waves, 2010, 30(3): 288-294. doi: 10.11883/1001-1455(2010)03-0288-07
[10]	HAO Chun-yue, ZHENG Zhong. Relativityandenergyratiobetweentwoexplosionevent[J]. Explosion And Shock Waves, 2010, 30(5): 535-540. doi: 10.11883/1001-1455(2010)05-0535-06
[11]	TANG Tie-gang, GUI Yu-lin, LI Qing-zhong, CHEN Yong-tao, TONG Hui-feng, LIU Cang-li. Adiscussionofdataprocessingtechniquesforexpandingringtest[J]. Explosion And Shock Waves, 2010, 30(5): 505-510. doi: 10.11883/1001-1455(2010)05-0505-06
[12]	ZHONG Guo-sheng, FANG Ying-guang, GU Ren-guo, ZHAO Kui. Safety assessment of structures by blasting vibration based on wavelet analysis[J]. Explosion And Shock Waves, 2009, 29(1): 35-40. doi: 10.11883/1001-1455(2009)01-0035-06
[13]	DONG Hai-ping, CAI Rui-jiao, MU Hui-na, CAO Jian-hua. A sensitivity parameter design method for reliability of explosive initiators[J]. Explosion And Shock Waves, 2009, 29(6): 613-616. doi: 10.11883/1001-1455(2009)06-0613-04
[14]	LI Xiang-dong, SU Yi-ling, HAN Yong-yao. Vulnerability assessment of the missile subjected to the fragment warhead[J]. Explosion And Shock Waves, 2007, 27(5): 468-472. doi: 10.11883/1001-1455(2007)05-0468-05
[15]	WEN Yu-quan, HONG Dong-pao, WANG Wei. Study on theory and method of reliability assessment of explosive initiator based on testing entropy[J]. Explosion And Shock Waves, 2007, 27(6): 553-556. doi: 10.11883/1001-1455(2007)06-0553-04
[16]	CAI Zhong-min, XU Wen-ling, LIANH Wei-min. Dynamic stress concentration factor of an elastic plate with a hole subjected to negative transverse explosive loading[J]. Explosion And Shock Waves, 2006, 26(5): 452-455. doi: 10.11883/1001-1455(2006)05-0452-04
[17]	ZHONG Fang-qing, LI Shan-lin, SUN Heng-zhong, ZHOU Jian-qing, ZOU Zu-jun, WANG Wen-xue. Seismic source function for an underground explosion[J]. Explosion And Shock Waves, 2005, 25(2): 176-179. doi: 10.11883/1001-1455(2005)02-0176-04