Design and impact analysis of a high-g accelerometer

SHI Yun-Bo; ZHU Zheng-Qiang; LIU Xiao-Peng; DU Kang; LIU Jun

doi:10.11883/1001-1455(2010)03-0329-04

Volume 30 Issue 3

Nov. 2010

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2010 > 30(3): 329-332

SHI Yun-Bo, ZHU Zheng-Qiang, LIU Xiao-Peng, DU Kang, LIU Jun. Design and impact analysis of a high-g accelerometer[J]. Explosion And Shock Waves, 2010, 30(3): 329-332. doi: 10.11883/1001-1455(2010)03-0329-04

Citation:

SHI Yun-Bo, ZHU Zheng-Qiang, LIU Xiao-Peng, DU Kang, LIU Jun. Design and impact analysis of a high-g accelerometer[J]. Explosion And Shock Waves, 2010, 30(3): 329-332. doi: 10.11883/1001-1455(2010)03-0329-04

Citation:

PDF( 820 KB)

Design and impact analysis of a high-g accelerometer

doi: 10.11883/1001-1455(2010)03-0329-04

Publish Date: 2010-05-25

Abstract

Abstract

To meet the test requirements in special situation,a high-g accelerometer structure with four-terminal fixed beam-island was designed. The dynamic characteristics of the accelerometer were test by using the Hopkinson bar impact calibration device. The test results show that the sensitivity of the sensor is 1.2 V/g and the linearity is 5%. The output signal is proper when impact by 2105 g. So the designed accelerometer can effectively meet the special test requirements such as high impact and strong vibration,and it can be applied to the penetration system.
- mechanics of explosion,
- anti-overload ability,
- Hopkinson bar,
- high-g accelerometer,
- beam-island

FullText(HTML)

References(0)

References

Relative Articles

[1]	WANG Qinghua, GUO Weiguo, XU Feng, GAO Meng, WANG Zhihao. Synchronous and decoupling calibration of tri-axial impact force transducers based on a Hopkinson bar and an artificial neural network[J]. Explosion And Shock Waves, 2022, 42(10): 104101. doi: 10.11883/bzycj-2022-0015
[2]	Zhang Yu, Li Guoqiang, Chen Kepeng, Chen Airong. Research advances of safety assessment of bridges under blast load[J]. Explosion And Shock Waves, 2016, 36(1): 135-144. doi: 10.11883/1001-1455(2016)01-0135-10
[3]	Li Dian, Zhu Xi, Hou Hailiang, Zhong Qiang. Finite element analysis of load characteristic of liquid-filled structure subjected to high velocity long-rod projectile penetration[J]. Explosion And Shock Waves, 2016, 36(1): 1-8. doi: 10.11883/1001-1455(2016)01-0001-08
[4]	Chen Chuang, Wang Xiao-ming, Li Wen-bin, Li Wei-bing, Dong Xiao-liang. Effect of matching of detonation waveform with liner configuration on the rod-like jet formation[J]. Explosion And Shock Waves, 2015, 35(6): 812-819. doi: 10.11883/1001-1455(2015)06-0812-08
[5]	Li Xiao-jun, Hou Chun-lin, He Qiu-mei, Mei Ze-hong. Dynamic analysis of aircraft impacting on concrete structures[J]. Explosion And Shock Waves, 2015, 35(2): 215-221. doi: 10.11883/1001-1455(2015)02-0215-07
[6]	Ning Hui-jun, Wang Hao, Wu Tan-hui, Zhang Meng-hua, Zhang Cheng, Ruan Wen-jun. Dynamics simulation of a profiled rod after detonation flying against air resistance[J]. Explosion And Shock Waves, 2015, 35(4): 541-546. doi: 10.11883/1001-1455(2015)04-0541-06
[7]	Wang Yu, Gao Kang-hua. Review on calculation methods for interaction between explosion waves in soil and underground structures[J]. Explosion And Shock Waves, 2015, 35(5): 703-710. doi: 10.11883/1001-1455(2015)05-0703-08
[8]	Guo Chun-huan, Zhou Pei-jun, Lu Zi-chun, Chang Yun-peng, Zou Guang-ping, Jiang Feng-chun. Application of pulse shaping technique in Hopkinson bar experiments[J]. Explosion And Shock Waves, 2015, 35(6): 881-887. doi: 10.11883/1001-1455(2015)06-0881-07
[9]	Zhang Chao, Xu Song-lin, Wang Peng-fei, Zhang Lei. Deformation and stress nonuniformity of aluminum foam under different impact speeds[J]. Explosion And Shock Waves, 2015, 35(4): 567-575. doi: 10.11883/1001-1455(2015)04-0567-09
[10]	Wang Peng-fei, Xu Song-lin, Li Zhi-bin, Hu Shi-sheng. An experimental study on dynamic mechanical property ofultra-light aluminum foam under high temperatures[J]. Explosion And Shock Waves, 2014, 34(4): 433-438. doi: 10.11883/1001-1455(2014)04-0433-06
[11]	DingYong-hong, MaTie-hua, ZuJing, YouWen-bin. DesignofaninversionswitchbasedonMEMSaccelerometer[J]. Explosion And Shock Waves, 2013, 33(3): 321-325. doi: 10.11883/1001-1455(2013)03-0321-04
[12]	Zeng Li-min, Zeng Han, . A new method for calibrating shock accelerometers[J]. Explosion And Shock Waves, 2013, 33(5): 531-536. doi: 10.11883/1001-1455(2013)05-0531-06
[13]	WANG Peng-fei, HU Shi-sheng. Mechanicalpropertiesoffoamaluminum withdifferentsizes[J]. Explosion And Shock Waves, 2012, 32(4): 393-398. doi: 10.11883/1001-1455(2012)04-0393-06
[14]	CHEN Rong, LU Fang-yun, LIN Yu-liang, XIA Kai-wen. Applicationsofalaserdisplacementgauge inHopkinsonbarexperiments[J]. Explosion And Shock Waves, 2011, 31(1): 36-42. doi: 10.11883/1001-1455(2011)01-0036-07
[15]	FANG Qin, DU Mao-ling, CHEN Li. Blast-resistant properties of beams consisting of nonlinear elastic large deformation materials[J]. Explosion And Shock Waves, 2009, 29(1): 7-12. doi: 10.11883/1001-1455(2009)01-0007-06
[16]	LUO Bin-qiang, HU Shi-sheng. Dynamic mechanical properties of SnAgCu solder[J]. Explosion And Shock Waves, 2009, 29(5): 542-545. doi: 10.11883/1001-1455(2009)05-0542-04
[17]	DOU Jin-long, WANG Xu-guang, LIU Yun-chuan. Dynamic mechanical behaviors of poplar wood[J]. Explosion And Shock Waves, 2008, 28(4): 367-371. doi: 10.11883/1001-1455(2008)04-0367-05
[18]	WANG Wen-jun, HU Shi-sheng. Calibration of high shock acceleration sensors[J]. Explosion And Shock Waves, 2006, 26(6): 568-571. doi: 10.11883/1001-1455(2006)06-0568-04
[19]	LI Yu-long, GUO Wei-guo. Miniature-Hopkinson bar technique[J]. Explosion And Shock Waves, 2006, 26(4): 303-308. doi: 10.11883/1001-1455(2006)04-0303-06
[20]	LI Yu-long, SUO Tao, GUO Wei-guo, HU Rui, LI Jin-shan, FU Heng-zhi. Determination of dynamic behavior of materials at elevated temperatures and high strain rates using Hopkinson bar[J]. Explosion And Shock Waves, 2005, 25(6): 487-492. doi: 10.11883/1001-1455(2005)06-0487-06

Supplements(0)

Cited By

Cited by

Periodical cited type(15)

1.	张振海, 张振山, 胡红波, 李科杰, 崔占忠, 蒋宇强. 高冲击传感器、极端环境试验测试与计量校准. 计测技术. 2019(04): 12-23 .
2.	刘俊, 曹慧亮, 石云波, 唐军, 申冲. 抗高过载硅微杯型振动陀螺结构设计与仿真. 导航与控制. 2019(04): 39-44 .
3.	李俊, 蒋滨安, 张志远, 刘闯. 温度对减载组件减载性能影响. 火炮发射与控制学报. 2019(03): 45-49 .
4.	赵永祺, 石云波, 赵思晗, 焦静静, 李飞, 王彦林. 一种提高抗过载能力的圆片级真空封装. 微纳电子技术. 2018(11): 844-848 .
5.	段宏伟, 郑文. 基于约瑟夫逊效应的高g值高分辨率加速度计的设计与仿真. 中北大学学报(自然科学版). 2017(03): 341-347 .
6.	Mei-Hui Jia, Cheng-Lin Wang, Bin Ren. Manufacturing Error Effects on Mechanical Properties and Dynamic Characteristics of Rotor Parts under High Acceleration. Chinese Journal of Mechanical Engineering. 2017(04): 920-932 .
7.	王成林, 陈华婷, 贾美慧, 黄晨灿. 高加速度加载条件下的转子部件配合特征研究. 制造业自动化. 2016(04): 143-145+153 .
8.	姜涛, 孙林. 环形微机械陀螺抗冲击性能的稳健性模型与优化. 系统仿真学报. 2016(04): 793-799 .
9.	钱立志, 宁全利, 李俊, 蒋滨安. 基于分离式霍普金森压杆的弹载器件动态特性模拟研究. 兵工学报. 2015(10): 1875-1881 .
10.	何昫, 张振海, 李科杰, 林然. Triaxial high-gaccelerometer of microelectro mechanical systems. Journal of Beijing Institute of Technology. 2015(04): 427-431 .
11.	曹延磊. 一种MEMS加速度计仿真. 工业设计. 2015(12): 173-174 .
12.	李俊, 宁全利, 朱建生, 刘闯. 减载材料对弹载器件抗高过载能力影响研究. 兵器材料科学与工程. 2013(03): 7-10 .
13.	张建新, 程翔, 张合. 侵彻引信高g值惯性开关试验研究. 南京理工大学学报. 2013(06): 917-921 .
14.	王晓倩, 李鹏, 孟祥然, 徐鹏飞, 冯薪霖, 薛晨阳, 闫树斌. 高g光学微腔加速度计的结构设计. 传感技术学报. 2012(08): 1049-1053 .
15.	林然, 张振海, 李科杰, 何昫, 张亮. 高冲击三维加速度传感器横向灵敏度校准技术. 振动.测试与诊断. 2016(05): 922-928+1025 .