Numerical studies of explosion induced cylindrical shell fractureunder different detonating modes

Liu Ming-tao; Tang Tie-gang; Hu Hai-bo; Li Qing-zhong; Hu Xiu-zhang; Li Yong-chi

doi:10.11883/1001-1455(2014)04-0415-06

Volume 34 Issue 4

Sep. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2014 > 34(4): 415-420

Liu Ming-tao, Tang Tie-gang, Hu Hai-bo, Li Qing-zhong, Hu Xiu-zhang, Li Yong-chi. Numerical studies of explosion induced cylindrical shell fractureunder different detonating modes[J]. Explosion And Shock Waves, 2014, 34(4): 415-420. doi: 10.11883/1001-1455(2014)04-0415-06

Citation:

Liu Ming-tao, Tang Tie-gang, Hu Hai-bo, Li Qing-zhong, Hu Xiu-zhang, Li Yong-chi. Numerical studies of explosion induced cylindrical shell fractureunder different detonating modes[J]. Explosion And Shock Waves, 2014, 34(4): 415-420. doi: 10.11883/1001-1455(2014)04-0415-06

Citation:

Liu Ming-tao, Tang Tie-gang, Hu Hai-bo, Li Qing-zhong, Hu Xiu-zhang, Li Yong-chi. Numerical studies of explosion induced cylindrical shell fractureunder different detonating modes[J]. Explosion And Shock Waves, 2014, 34(4): 415-420. doi: 10.11883/1001-1455(2014)04-0415-06

PDF( 1941 KB)

Numerical studies of explosion induced cylindrical shell fractureunder different detonating modes

doi: 10.11883/1001-1455(2014)04-0415-06

1.
Department of Modern Mechanics, University of Science and Technology of China, Hefei 230027, Anhui, China
2.
Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621999, Sichuan, China

More Information

Corresponding author: Liu Ming-tao, lmt2005@mail.ustc.edu.cn
Received Date: 2012-12-19
Rev Recd Date: 2013-03-22
Publish Date: 2014-07-25

Abstract

Abstract

The explosion induced fracture of metallic cylinder under different detonating modes was simulated. The results show that different detonating modes lead to significant differences on the pressure and apply work history of the cylindrical shell. A semi-decoupling numerical method was proposed to thin the mesh size of the metallic cylinder and to simulate the process of destruction of cylindrical shell under different detonating modes with higher degree of accuracy. Theoretical analysis shows that this method is reasonable. The shear bands appearing during the fracture of metallic cylindrical shell was reproduced using this semi-decoupling method.
- solid mechanics,
- shear band,
- detonating mode,
- metallic cylindrical shell fracture

FullText(HTML)

References(8)

References

[1]	Gurney R W. The initial velocities of fragments from bombs, shell and grenades[R]. Army Ballistic Research Laboratory, 1943.
[2]	Taylor G I. Fragmentation of tubular bombs[C]//Science Papers of Sir G. I. Taylor. London: Cambridge University Press, 1963: 387-390.
[3]	Hoggatt C R, Recht R F. Fracture behavior of tubular bombs[J]. Journal of Applied Physics, 2003, 39(3): 1856-1862. doi: 10.1063/1.1656442
[4]	胡八一, 董庆东, 韩长生, 等.内部爆轰加载下的钢管膨胀断裂研究[J].爆炸与冲击, 1993, 13(1): 49-54. http://www.bzycj.cn/article/id/10657 Hu Ba-yi, Dong Qing-dong, Han Chang-sheng, et al. Studies of expansion and fracture of explosive-filled steel cylinders[J]. Explosion and Shock Waves, 1993, 13(1): 49-54. http://www.bzycj.cn/article/id/10657
[5]	胡海波, 汤铁钢, 胡八一, 等.金属柱壳在爆炸加载断裂中的单旋现象[J].爆炸与冲击, 2004, 24(2): 97-107. doi: 10.3321/j.issn:1001-1455.2004.02.001 Hu Hai-bo, Tang Tie-gang, Hu Ba-yi, et al. An study of uniform shear bands orientation selection tendency on explosively loaded cylindrical shells[J]. Explosion and Shock Waves, 2004, 24(2): 97-107. doi: 10.3321/j.issn:1001-1455.2004.02.001
[6]	汤铁钢, 李庆忠, 孙学林, 等. 45钢柱壳膨胀断裂的应变率效应[J].爆炸与冲击, 2006, 26(2): 129-133. doi: 10.3321/j.issn:1001-1455.2006.02.006 Tang Tie-gang, Li Qing-zhong, Sun Xue-lin, et al. Strain-rate effects of expanding fracture of 45 steel cylinder shells driven by detonation[J]. Explosion and Shock Waves, 2006, 26(2): 129-133. doi: 10.3321/j.issn:1001-1455.2006.02.006
[7]	李永池, 李大红, 魏志刚, 等.内爆炸载荷下圆管变形、损伤和破坏规律的研究[J].力学学报, 1999, 31(4): 442-449. doi: 10.3321/j.issn:0459-1879.1999.04.008 Li Yong-chi, Li Da-hong, Wei Zhi-gang, et al. Research on the deformation, damage and fracture rules of circular tubes under inside-explosive loading[J]. Acta Mechanica Sinica, 1999, 31(4): 442-449. doi: 10.3321/j.issn:0459-1879.1999.04.008
[8]	黄西成.内爆与外爆加载下壳体的力学状态及破坏模式分析[D].绵阳: 中国工程物理研究院, 2010.

Relative Articles

[1]	DENG Yuxuan, ZHANG Xianfeng, LIU Chuang, LI Pengcheng, MA Zhengwei, LIU Zihan. Effect of initiation models on the fragment velocity distribution of elliptical cross-section warhead[J]. Explosion And Shock Waves, 2024, 44(10): 101406. doi: 10.11883/bzycj-2024-0041
[2]	YANG Renshu, ZHAO Yong, ZHAO Jie, ZUO Jinjing, GE Fengyuan, CHEN Cheng, DING Chenxi. Experimental study on evolution of strain field of explosion stress wave passing through a heterogeneous interface based on the DIC method[J]. Explosion And Shock Waves, 2022, 42(12): 123201. doi: 10.11883/bzycj-2022-0097
[3]	DENG Hai, QUAN Jialin, LIANG Zhengfeng. Influence of eccentric initiation on energy distribution gain of a warhead charge[J]. Explosion And Shock Waves, 2022, 42(5): 052201. doi: 10.11883/bzycj-2021-0280
[4]	Jin Ting, Yang Ping. Shear behaviors of hat-shaped high manganese steel specimens under high-speed impact[J]. Explosion And Shock Waves, 2017, 37(1): 150-156. doi: 10.11883/1001-1455(2017)01-0150-07
[5]	Kou Jianfeng, Xu Fei, Feng Wei. Study of strain energy based shear model for single lap bolt[J]. Explosion And Shock Waves, 2017, 37(1): 10-14. doi: 10.11883/1001-1455(2017)01-0001-09
[6]	Shi Chunying, Xu Songlin, Shan Junfang, Wang Pengfei, Hu Shisheng. Plastic instability of LY12 aluminum alloy ring under longitudinal impact compression[J]. Explosion And Shock Waves, 2017, 37(3): 471-478. doi: 10.11883/1001-1455(2017)03-0471-08
[7]	Leng Zhendong, Lu Wenbo, Fan Yong, Chen Ming, Yan Peng. Explosion energy distribution by side initiation and its effects on rock fragmentation[J]. Explosion And Shock Waves, 2017, 37(4): 661-669. doi: 10.11883/1001-1455(2017)04-0661-09
[8]	Guo Zhaoliang, Ren Guowu, Zhang Shiwen, Tang Tiegang, Liu Cangli. Constitutive equation of expanding cylindrical shell at constant strain rate[J]. Explosion And Shock Waves, 2016, 36(5): 583-589. doi: 10.11883/1001-1455(2016)05-0583-07
[9]	Ren Guo-wu, Guo Zhao-liang, Zhang Shi-wen, Tang Tie-gang, Jin Shan, Hu Hai-bo. Experiment and numerical simulation on expansion deformation and fracture of cylindrical shell[J]. Explosion And Shock Waves, 2015, 35(6): 895-900. doi: 10.11883/1001-1455(2015)06-0895-06
[10]	Su Guan-long, Gong Xu, Li Yu-long, Guo Ya-zhou, Suo Tao. Shear behavior of TC4 alloy under dynamic loading[J]. Explosion And Shock Waves, 2015, 35(4): 527-535. doi: 10.11883/1001-1455(2015)04-0527-09
[11]	YANG Guo-liang, YANG Ren-shu, JIANG Lin-lin. Pressuredistributionalongboreholewithaxialair-deckchargeblasting[J]. Explosion And Shock Waves, 2012, 32(6): 653-657. doi: 10.11883/1001-1455(2012)06-0653-05
[12]	ZHAO Peng-duo, LU Fang-yun, CHEN Rong, LI Jun-ling, LIN Yu-liang, TAN Duo-wang. Luminousfluxmethodformeasuringshearstrain ofthespecimeninSHPSB[J]. Explosion And Shock Waves, 2011, 31(3): 232-236. doi: 10.11883/1001-1455(2011)03-0232-05
[13]	CHEN Cheng-jun, XIE Ruo-ze, ZHANG Fang-ju. Numericalsimulationsonmechanicalresponsesof aluminumfoam-filledcylindricalshells[J]. Explosion And Shock Waves, 2011, 31(4): 361-366. doi: 10.11883/1001-1455(2011)04-0361-06
[14]	LI Ji-cheng, CHEN Xiao-wei, CHEN Gang. Numericalsimulationsonadiabaticsheardeformationsof 921Asteelpureshearhat-shapedspecimens[J]. Explosion And Shock Waves, 2010, 30(4): 361-369. doi: 10.11883/1001-1455(2010)04-0361-09
[15]	LI Yun-kai, XIE Feng, WANG Fu-chi, LI Shu-kui. Study on adiabatic shear failure of W-Ni-Mn heavy alloy[J]. Explosion And Shock Waves, 2007, 27(2): 185-189. doi: 10.11883/1001-1455(2007)02-0185-05
[16]	SONG Shun-cheng, WANG Ting-hui, CAI Hong-nian, WANG Fu-chi. Numerical calculations of adiabatic shearing localization of steel projectile impacting concrete[J]. Explosion And Shock Waves, 2007, 27(3): 246-250. doi: 10.11883/1001-1455(2007)03-0246-05
[17]	DUAN Chun-zheng, WANG Min-jie, LI Guo-he, CAI Yu-jun. Study on microscopic characteristics of adiabatic shear bands in the serrated chips formed during high speed machining[J]. Explosion And Shock Waves, 2007, 27(1): 91-96. doi: 10.11883/1001-1455(2007)01-0091-06
[18]	TANG Tie-gang, LI Qing-zhong, SUN Xue-lin, SUN Zhan-feng, JIN Shan, GU Yan. Strain-rate effects of expanding fracture of 45 steel cylinder shells driven by detonation[J]. Explosion And Shock Waves, 2006, 26(2): 129-133. doi: 10.11883/1001-1455(2006)02-0129-05
[19]	WANG Bao-guo, ZHANG Jing-lin, WANG Zuo-shan, LIU Yu-cun, WANG Jian-hua. Influencing factors of the yield of diamond powder synthesised by detonation and explosion shock[J]. Explosion And Shock Waves, 2006, 26(5): 429-433. doi: 10.11883/1001-1455(2006)05-0429-05
[20]	YAO Guo-wen, LIU Zhan-fang, HUANG Pei-yan. Experimental study on shear response of alumina under combined compression and shear loading[J]. Explosion And Shock Waves, 2005, 25(2): 119-124. doi: 10.11883/1001-1455(2005)02-0119-06

Supplements(0)

Cited By

Cited by

Periodical cited type(10)

1.	史利平，王成龙，吴宏斌，史文卿，薛再清. 两端点起爆对炸药近地场冲击波威力增强效应研究. 北京理工大学学报. 2022(04): 340-346 .
2.	刘龙飞，刘炼煌，胡力，杨智程. 表面加工塑性层对金属柱壳剪切带自组织单旋起始的影响. 力学学报. 2022(04): 1051-1062 .
3.	张广华，沈飞，刘睿，王辉. 起爆方式对非圆截面装药结构释能特性的影响. 高压物理学报. 2022(03): 129-137 .
4.	沈飞，王辉，罗一鸣，余文力，王煊军. 非相似圆筒内爆膨胀模型设计及试验验证. 火炸药学报. 2022(04): 529-535 .
5.	杨晨，刘明涛，汤铁钢，郭昭亮，范诚. 电磁加载下7075铝环的膨胀断裂模式转变研究. 爆炸与冲击. 2021(03): 103-107 . 本站查看
6.	杨涛，刘龙飞，杨智程，胡力，卢立伟，石献坤. 表面粗糙度对TC4钛合金柱壳剪切带形成的影响. 力学学报. 2021(03): 813-822 .
7.	李洪伟，雷战，刘伟，江向阳，王贵. 起爆方式对岩石柱状装药爆破作用的影响. 工程爆破. 2019(05): 28-34 .
8.	马一超，王德胜，邵红光，黄冕，兰盾. 起爆方式对露天深孔爆破效果影响的数值分析. 现代矿业. 2017(08): 81-84 .
9.	王执权，魏继锋，王树山，徐豫新，陶永恒，马峰. 一种双模战斗部毁伤效能评估研究. 兵工学报. 2016(S1): 24-29 .
10.	张杰，王洋. 起爆方式对深孔爆破影响的数值模拟. 有色金属工程. 2015(S1): 141-144 .