Constitutive model of transparent aviation polyurethane at high strain rates

Zhang Long-hui; Zhang Xiao-qing; Yao Xiao-hu; Zang Shu-guang

doi:10.11883/1001-1455(2015)01-0051-06

Volume 35 Issue 1

Feb. 2015

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2015 > 35(1): 51-56

ZHU Yu-jian, YANG Ji-ming, J.H.S. Lee. Structure and behavior of the high-speed deflagration generated by a detonation wave passing through a perforated plate[J]. Explosion And Shock Waves, 2008, 28(2): 97-104. doi: 10.11883/1001-1455(2008)02-0097-08

Citation:

Zhang Long-hui, Zhang Xiao-qing, Yao Xiao-hu, Zang Shu-guang. Constitutive model of transparent aviation polyurethane at high strain rates[J]. Explosion And Shock Waves, 2015, 35(1): 51-56. doi: 10.11883/1001-1455(2015)01-0051-06

Citation:

PDF( 1058 KB)

Constitutive model of transparent aviation polyurethane at high strain rates

doi: 10.11883/1001-1455(2015)01-0051-06

1.
School of Civil Engineering and Transportation, South China University of Technology, Guangzhou 510640, Guangdong, China
2.
China Building Material Test and Certification Center, Beijing 100024, China

Received Date: 2013-05-23
Rev Recd Date: 2013-10-17
Publish Date: 2015-01-25

Abstract

Abstract

The uniaxial compressive properties of aviation polyurethane were investigated experimentally by using a modified aluminum split Hopkinson pressure bar apparatus. The obtained stress-strain curves presented distinct non-linear viscoelastic characteristic.Based on the constitutive theory and the experimental data, a hyper-viscoelastic constitutive model that incorporated a strain-dependent relaxation time was proposed to describe the large compressive deformation response of incompressible aviation polyurethane at high strain rates. The proposed model was made up of two parallel mechanical elements-one component to characterize quasi-static hyperelastic behavior, and the other to define rate-sensitivity and strain history dependence. The predictions of the mechanical behavior using a hyper-viscoelastic constitutive model based on strain energy functions and hereditary approach had a good agreement with experimental results.
- solid mechanics,
- constitutive model,
- SHPB,
- aviation polyurethane,
- high strain rate,
- hyper-viscoelastic

FullText(HTML)

References(13)

References

[1]	Roland C M, Twigg J N, Vu Y, et al. High strain rate mechanical behavior of polyurea[J]. Polymer, 2007, 48(2): 574-578.
[2]	Yi J, Boyce M C, Lee G F, et al. Large deformation rate-dependent stress-strain behavior of polyurea and polyurethanes[J]. Polymer, 2006, 47(1): 319-329. https://www.sciencedirect.com/science/article/pii/S0032386105015740
[3]	Sarva S S, Deschanel S, Boyce M C, et al. Stress-strain behavior of a polyurea and a polyurethane from low to high strain rates[J]. Polymer, 2007, 48(8): 2208-2213.
[4]	Shim J, Mohr D. Using split Hopkinson pressure bars to perform large strain compression tests on polyurea at low, intermediate and high strain rates[J]. International Journal of Impact Engineering, 2009, 36(9): 1116-1127.
[5]	Amirkhizi A V, Isaacs J, Mcgee J, et al. An experimentally-based viscoelastic constitutive model for polyurea, including pressure and temperature effects[J]. Philosophical Magazine, 2006, 86(36): 5847-5866.
[6]	Li C, Lua J. A hyper-viscoelastic constitutive model for polyurea[J]. Materials Letters, 2009, 63(11): 877-880. https://www.sciencedirect.com/science/article/pii/S0167577X09000482
[7]	Yang L M, Shim V, Lim C T. A visco-hyperelastic approach to modelling the constitutive behaviour of rubber[J]. International Journal of Impact Engineering, 2000, 24(6): 545-560.
[8]	Pouriayevali H, Guo Y B, Shim V. A constitutive description of Elastomer behaviour at high strain rates-A strain-dependent relaxation time approach[J]. International Journal of Impact Engineering, 2012, 47: 71-78. https://www.sciencedirect.com/science/article/pii/S0734743X12000760
[9]	Chen W, Zhang B, Forrestal M J. A split Hopkinson bar technique for low-impedance materials[J]. Experimental Mechanics, 1999, 39(2): 81-85.
[10]	林玉亮, 卢芳云, 卢力.高应变率下硅橡胶的本构行为研究[J].高压物理学报, 2007, 21(3): 289-294. Lin Yu-liang, Lu Fang-yun, Lu Li. Constitutive behaviors of a silicone rubber at high strain rates[J]. Chinese Journal of High Pressure Physics, 2007, 21(3): 289-294.
[11]	王礼立.冲击动力学进展[M].合肥: 中国科学技术大学出版社, 1992.
[12]	Rivlin R S. Collected papers of R. S. Rivlin[M]. Berlin: Springer, 1997.
[13]	Hoo Fatt M S, Xin O. Integral-based constitutive equation for rubber at high strain rates[J]. International Journal of Solids and Structures, 2007, 44(20): 6491-6506.

Relative Articles

[1]	LIU Jun, YIN Jianwei, ZHANG Fengguo. Numerical simulation and experimental interpretation of detonation-driven silicone rubber based on a simple shock decomposition model[J]. Explosion And Shock Waves, 2025, 45(1): 014201. doi: 10.11883/bzycj-2024-0070
[2]	ZHANG Shizhong, LI Jinping, KANG Yue, HU Jianqiao, CHEN Hong. Generation of near-field blast wave by means of shock tube[J]. Explosion And Shock Waves, 2024, 44(12): 121434. doi: 10.11883/bzycj-2024-0204
[3]	BAI Jingsong, LIU Yang, CHEN Han, ZHONG Min. Construction of end-to-end machine learning surrogate model and its application in detonation driving problem[J]. Explosion And Shock Waves. doi: 10.11883/bzycj-2024-0099
[4]	LIU Jun, SUN Zhiyuan, ZHANG Fengguo, YIN Jianwei. Simulation analysis of the effect of clearance on motion characteristic of metal flyer under detonation loading[J]. Explosion And Shock Waves, 2023, 43(4): 042201. doi: 10.11883/bzycj-2022-0239
[5]	DENG Yuxuan, ZHANG Xianfeng, LIU Chuang, LIU Junwei, LI Pengcheng, SHENG Qiang, XIAO Chuan. Casing fracture and damage characteristics of an elliptical cross-section warhead under explosive loading[J]. Explosion And Shock Waves, 2023, 43(9): 091412. doi: 10.11883/bzycj-2023-0135
[6]	LU Xingyu, LI Jinping, CHEN Hong, YU Hongru. Experimental study on jet initiation for detonation driver[J]. Explosion And Shock Waves, 2019, 39(6): 062102. doi: 10.11883/bzycj-2018-0223
[7]	Li Chuanzeng, Wang Shushan, Song Shuzhong. Influence of inert core stuffing's physical properties on the impact of detonation driving of scalar hollow charge[J]. Explosion And Shock Waves, 2017, 37(2): 291-298. doi: 10.11883/1001-1455(2017)02-0291-08
[8]	Zheng Chun, Chen Zhihua, Zhang Huanhao, Sun Xiaohui. Numerical investigations on propagating characteristics of shock waves in different triangle wedges[J]. Explosion And Shock Waves, 2016, 36(3): 379-385. doi: 10.11883/1001-1455(2016)03-0379-07
[9]	Ning Hui-jun, Wang Hao, Wang Zheng-wei, Zhang Cheng, Ruan Wen-jun. Experimental research on static dispersing of profiled rods driven by detonation[J]. Explosion And Shock Waves, 2015, 35(5): 723-728. doi: 10.11883/1001-1455(2015)05-0723-06
[10]	Ning Hui-jun, Wang Hao, Wu Tan-hui, Zhang Meng-hua, Zhang Cheng, Ruan Wen-jun. Dynamics simulation of a profiled rod after detonation flying against air resistance[J]. Explosion And Shock Waves, 2015, 35(4): 541-546. doi: 10.11883/1001-1455(2015)04-0541-06
[11]	Liu Xian-jun, Wang Xiao-long, Li Si-zhong, Zhong Wei-zhou, Zhou Ben-quan. Device for ejecting water column by inertia effect based on load technology of gas gun[J]. Explosion And Shock Waves, 2014, 34(3): 272-277. doi: 10.11883/1001-1455(2014)03-0272-06
[12]	GuLin, ZhangHe. Dischargecharacteristicsofferroelectricceramicsexplosive toelectricaltransducerimpactedbyexplosive-drivenflyer[J]. Explosion And Shock Waves, 2013, 33(2): 212-216. doi: 10.11883/1001-1455(2013)02-0212-05
[13]	LIU Zhen-yi, HUANG Ping, XU Ya-bo. Monte-Carlo analysis of the projectile fragments from cylindrical tank boiling liquid expanding vapor explosion accident[J]. Explosion And Shock Waves, 2010, 30(6): 569-576. doi: 10.11883/1001-1455(2010)06-0569-08
[14]	LONG Xin-ping, HAN Yong, JIANG Zhi-hai, HUANG Hui, HUANG Yi-min, HONG Tao. Measurementandnumericalsimulationofinitialstage aboutdetonationproductsdrivingwater[J]. Explosion And Shock Waves, 2010, 30(1): 12-16. doi: 10.11883/1001-1455(2010)01-0012-05
[15]	XIONG Jun, ZHOU Hai-bing, LIU Wen-tao, ZHANG Shu-dao, SUN Jin-shan. Spallation of steel tube driven by sliding detonation[J]. Explosion And Shock Waves, 2008, 28(2): 105-109. doi: 10.11883/1001-1455(2008)02-0105-05
[16]	TAN Duo-wang, CAO Ren-yi, WANG Guang-jun, GONG Yan-qing. Influence of detonation driving on terminal ballistic effects of tungsten spheres[J]. Explosion And Shock Waves, 2008, 28(6): 481-487. doi: 10.11883/1001-1455(2008)06-0481-07
[17]	WANG Bao-guo, ZHANG Jing-lin, WANG Zuo-shan, LIU Yu-cun, WANG Jian-hua. Influencing factors of the yield of diamond powder synthesised by detonation and explosion shock[J]. Explosion And Shock Waves, 2006, 26(5): 429-433. doi: 10.11883/1001-1455(2006)05-0429-05
[18]	YU De-shui, ZHAO Feng, TAN Duo-wang, PENG Qi-xian, FANG Qing. Experimental studies on detonation driving behavior of JOB-9003 and JB-9014 slab explosives[J]. Explosion And Shock Waves, 2006, 26(2): 140-144. doi: 10.11883/1001-1455(2006)02-0140-05
[19]	LIU Yi, QIN Cheng-sen, HANG Yi-hong, WANG Pei. Improved Taylor formula and its numerical simulation[J]. Explosion And Shock Waves, 2006, 26(4): 289-293. doi: 10.11883/1001-1455(2006)04-0289-05
[20]	QIN Cheng-sen, LIU Yi, HANG Yi-hong, WANG Pei. The projection angle equation of flyer plate under detonation driving[J]. Explosion And Shock Waves, 2005, 25(1): 1-4. doi: 10.11883/1001-1455(2005)01-0001-04