A new type of explosive diode and its mechanism

Cui Yu; Ma Honghao; Shen Zhaowu; Wang Fei; Hong Yong; Wang Luqing

doi:10.11883/1001-1455(2017)06-1031-08

Volume 37 Issue 6

Sep. 2017

Turn off MathJax

Article Contents

Article Navigation > Explosion And Shock Waves > 2017 > 37(6): 1031-1038

Cui Yu, Ma Honghao, Shen Zhaowu, Wang Fei, Hong Yong, Wang Luqing. A new type of explosive diode and its mechanism[J]. Explosion And Shock Waves, 2017, 37(6): 1031-1038. doi: 10.11883/1001-1455(2017)06-1031-08

Citation:

Cui Yu, Ma Honghao, Shen Zhaowu, Wang Fei, Hong Yong, Wang Luqing. A new type of explosive diode and its mechanism[J]. Explosion And Shock Waves, 2017, 37(6): 1031-1038. doi: 10.11883/1001-1455(2017)06-1031-08

Citation:

PDF( 1930 KB)

A new type of explosive diode and its mechanism

doi: 10.11883/1001-1455(2017)06-1031-08

CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei 230026, Anhui, China

Received Date: 2016-04-19
Rev Recd Date: 2016-11-04
Publish Date: 2017-11-25

Abstract

Abstract

In the present work, to address the premature explosion for the detonating network, we designed a new type of irreversible detonation explosive diode and studied the mechanism and limiting factors about the explosive diode in transmitting the positive detonation and stopping the backward detonation, using the calculation and experiments of the symmetrical charge structure. The results show that the new type of explosive diode can achieve this aim and that the maximum amount of the firing charge and the crucial length of the delay elements from the theoretical calculation are fairly consistent with those from the experiments.
- explosive diode,
- mass limited of firing charge,
- crucial length,
- delay elements

FullText(HTML)

References(18)

References

[1]	王付景.论城市控制爆破中的安全管理[J].低碳世界, 2015(23):264-265. http://d.old.wanfangdata.com.cn/Periodical/dtsj201523161 Wang Fujing. The safety management in the urban controlled blasting[J]. Low Carbon World, 2015(23):264-265. http://d.old.wanfangdata.com.cn/Periodical/dtsj201523161
[2]	王飞, 马宏昊, 沈兆武.一种应用于高温火区爆破中的不可逆起爆网路的耐温与传爆性能[J].含能材料, 2016, 24(1):106-110. http://d.old.wanfangdata.com.cn/Periodical/hncl201601018 Wang Fei, Ma Honghao, Shen Zhaowu.Heat resistance and explosive transfer performance in the irreversible detonating network applied in high temperature mine blasting[J]. Chinese Journal of Energetic Materials, 2016, 24(1):106-110. http://d.old.wanfangdata.com.cn/Periodical/hncl201601018
[3]	田程.防控早爆引起群死群伤事故分析及应急预案[J].现代矿业, 2011(6):93-94. doi: 10.3969/j.issn.1674-6082.2011.06.035 Tian Cheng. The accident analysis and contingency plans about death and injury caused by premature explosion[J]. Express Information of Mining Industry, 2011(6):93-94. doi: 10.3969/j.issn.1674-6082.2011.06.035
[4]	张艳.一起离奇露天早爆事故原因分析[C]//中国爆破器材行业协会乳化炸药安全技术交流会论文集.昆明, 2013: 78-80.
[5]	张杰, 郝新民, 马伟.高温炮孔爆破的安全处理探讨[J].工程爆破, 2013, 19(1):102-104. http://d.old.wanfangdata.com.cn/Periodical/gcbp201301027 Zhang Jie, Hao Xinmin, Ma Wei. Discussion on the safe disposal of the high temperature hole blasting[J]. Engineering Blasting, 2013, 19(1):102-104. http://d.old.wanfangdata.com.cn/Periodical/gcbp201301027
[6]	宋庆刚, 李迎.层次分析法在早爆事故中的应用[J].采矿技术, 2014(5):154-156. doi: 10.3969/j.issn.1671-2900.2014.05.063 Song qingang, Li ying. The application of AHP in premature blasting[J]. Mining Technology, 2014(5):154-156. doi: 10.3969/j.issn.1671-2900.2014.05.063
[7]	沈兆武, 马宏昊.小直径低线密度装药的导爆索或雷管延期线的制作方法: CN101556130 A[P]. 2009-10-14.
[8]	张宝平, 张庆明, 黄风雷.爆轰物理学[M].北京:兵器工业出版社, 2001:265-319.
[9]	金韶华.炸药理论[M].西安:西北工业大学出版社, 2010:19-20.
[10]	章冠人, 陈大年.凝聚炸药起爆动力学[M].北京:国防工业出版社, 1991:90-109.
[11]	Walker F E, Wasley R J. Critical energy for shock initiation of heterogeneous explosives[J]. Explosive Stoffe, 1969, 17(1):9. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK000001148783
[12]	奥尔连科Л Л.爆炸物理学[M].孙承纬, 译.北京: 科学出版社, 2011: 1301-1331.
[13]	Seay G E, Seely Jr L B. Initiation of a low-density PETN pressing by a plane shock wave[J]. Journal of Applied Physics, 1961, 32(6):1092-1097. doi: 10.1063/1.1736165
[14]	Stirpe D, Johnson J O, Wackerle J. Shock initiation of XTX-8003 and pressed PETN[J]. Journal of Applied Physics, 1970, 41(9):3884-3893. doi: 10.1063/1.1659523
[15]	王作山, 刘玉存, 郑敏, 等.爆轰冲击波在有机隔板中衰减模型的研究[J].应用基础与工程科学学报, 2001, 9(4):316-319. doi: 10.3969/j.issn.1005-0930.2001.04.004 Wang Zuoshan, Liu Yucun, Zheng Min, et al. Study on the attenuating model of detonation shock wave in the PMMA gap[J]. Journal of Basic Science and Engineering, 2001, 9(4):316-319. doi: 10.3969/j.issn.1005-0930.2001.04.004
[16]	王礼立.应力波基础[M].北京:国防工业出版社, 2005:154-155.
[17]	Green L G, Lee E L. Detonation pressure measurements on PETN[C]//Proceedings of 13th International Detonation Symposium. America: Norfolk, 2006: 1141-1150.
[18]	Mineev V N, Mineev A V. Viscosity of metals under shock-loading conditions[J]. Le Journal de Physique IV, 1997, 7(C3):583-585. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=10fdb1e3e88c46c13ccf333894f60c23