Application of cohesive elements in modeling the low-velocity impact responseand failure of fiber reinforced plastic laminates

JIANG Zhen; WEN Heming

doi:10.11883/bzycj-2017-0245

Volume 39 Issue 4

Mar. 2019

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2019 > 39(4): 043202

GONG Bai-lin, LU Fang-yun, LI Xiang-yu. Atheoreticalmodelforforecastingdeformationshapesofdeformablewarheads[J]. Explosion And Shock Waves, 2010, 30(1): 65-69. doi: 10.11883/1001-1455(2010)01-0065-05

Citation:

JIANG Zhen, WEN Heming. Application of cohesive elements in modeling the low-velocity impact responseand failure of fiber reinforced plastic laminates[J]. Explosion And Shock Waves, 2019, 39(4): 043202. doi: 10.11883/bzycj-2017-0245

GONG Bai-lin, LU Fang-yun, LI Xiang-yu. Atheoreticalmodelforforecastingdeformationshapesofdeformablewarheads[J]. Explosion And Shock Waves, 2010, 30(1): 65-69. doi: 10.11883/1001-1455(2010)01-0065-05

Citation:

PDF( 1950 KB)

Application of cohesive elements in modeling the low-velocity impact responseand failure of fiber reinforced plastic laminates

doi: 10.11883/bzycj-2017-0245

JIANG Zhen,
WEN Heming^,

CAS Key Laboratory for Mechanical Behavior and Design of Materials,University of Science and Technology of China, Hefei 230026, Anhui, China

Received Date: 2017-06-30
Rev Recd Date: 2017-08-28

Available Online: 2019-03-25

Publish Date: 2019-04-01

Abstract

Abstract

Fiber reinforced plastic laminates (FRP) have been widely applied in modern industries such as aeronautics, astronautics, transportation, naval architecture. The impact response and failure process of FRP laminates are a major concern in academic and engineering community. In this paper, the response and failure of FRP laminates under impact loading are numerically simulated with emphasis being placed upon delamination by cohesive elements. The paper consists of three main parts: a damage model of adhesive layer based on improved cohesive zone method is firstly described; and then followed by constructing a finite element model with some modeling details; finally, the finite element model is validated on experiments, and the reason of delamination damage is delineated. It has been demonstrated that the present model can predict not only the load-time history and the load-displacement curve but also the delamination of FRP laminates under low-velocity impact.
- fiber reinforced plastic laminates,
- progressive damage constitutive model,
- delamination,
- cohesive element

FullText(HTML)

References(22)

References

[1]	BOTELHO E C, SILVA R A, PARDINI L C, et al. A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures [J]. Materials Research, 2006, 9(3): 247–256. doi: 10.1590/S1516-14392006000300002
[2]	HOU J P, PETRINIC N, RUIZ C, et al. Prediction of impact damage in composite plates [J]. Composites Science and Technology, 2000, 60(2): 273–281. doi: 10.1016/S0266-3538(99)00126-8
[3]	HOU J P, PETRINIC N, RUIZ C. A delamination criterion for laminated composites under low-velocity impact [J]. Composites Science and Technology, 2001, 61(14): 2069–2074. doi: 10.1016/S0266-3538(01)00128-2
[4]	LUO R K. The evaluation of impact damage in a composite plate with a hole [J]. Composites Science and Technology, 2000, 60(1): 49–58. doi: 10.1016/S0266-3538(99)00095-0
[5]	HASHIN Z. Failure criteria for unidirectional fiber composites [J]. Journal of Applied Mechanics, 1980, 47(2): 329–334. doi: 10.1115/1.3153664
[6]	MATZENMILLER A, LUBLINER J, Taylor R L. A constitutive model for anisotropic damage in fiber-composites [J]. Mechanics of Materials, 1995, 20(2): 125–152. doi: 10.1016/0167-6636(94)00053-0
[7]	CHANG F K, CHANG K Y. A progressive damage model for laminated composites containing stress concentration [J]. Journal of Composite Materials, 1987, 21(9): 834–855. doi: 10.1177/002199838702100904
[8]	WILLIAMS K V, VAZIRI R. Application of a damage mechanics model for predicting the impact response of composite materials [J]. Computers and Structures, 2001, 79(10): 997–1011.
[9]	WILLIAMS K V, VAZIRI R, POURSARTIP A. A physically based continuum damage mechanics model for thin laminated composite structures [J]. International Journal of Solids and Structures, 2003, 40(9): 2267–2300. doi: 10.1016/S0020-7683(03)00016-7
[10]	XIAO J R, GAMA B A, GILLESPIE Jr J W. Progressive damage and delamination in plain weave S-2 glass/SC-15 composites under quasi-static punch-shear loading [J]. Composite Structures, 2007, 78(2): 182–196. doi: 10.1016/j.compstruct.2005.09.001
[11]	GAMA B A, GILLESPIE Jr J W. Finite element modeling of impact, damage evolution and penetration of thick-section composites [J]. International Journal of Impact Engineering, 2011, 38(4): 181–197. doi: 10.1016/j.ijimpeng.2010.11.001
[12]	XIN S H, WEN H M. A progress damage model for fiber reinforced plastic composites subjected to impact loading [J]. International Journal of Impact Engineering, 2015, 75: 40–52. doi: 10.1016/j.ijimpeng.2014.07.014
[13]	OLSSON R. Analytical prediction of large mass impact damage in composite laminates [J]. Composites Part A: Applied Science and Manufacturing, 2001, 32(9): 1207–1215. doi: 10.1016/S1359-835X(01)00073-2
[14]	ESPINOSA H D, DWIVEDI S, LU H C. Modeling impact induced delamination of woven fiber reinforced composites with contact/cohesive laws [J]. Computer Methods in Applied Mechanics and Engineering, 2000, 183(3): 259–290.
[15]	AYMERICH F, PANI C, PRIOLO P. Damage response of stitched cross-ply laminates under impact loadings [J]. Engineering Fracture Mechanics, 2007, 74(4): 500–14. doi: 10.1016/j.engfracmech.2006.05.012
[16]	JOHNSON H E, LOUCA L A, MOURING S, et al. Modeling impact damage in marine composite panels [J]. International Journal of Impact Engineering, 2009, 36(1): 25–39. doi: 10.1016/j.ijimpeng.2008.01.013
[17]	SINGH H, MAHAJAN P. Modeling damage induced plasticity for low velocity impact simulation of three dimensional fiber reinforced composite [J]. Composite Structures, 2015, 131: 290–303. doi: 10.1016/j.compstruct.2015.04.070
[18]	DUGDALE D S. Yielding of steel sheets containing slits [J]. Journal of the Mechanics and Physics of Solids, 1960, 8(2): 100–104. doi: 10.1016/0022-5096(60)90013-2
[19]	BARENBLATT G I. The mathematical theory of equilibrium cracks in brittle fracture [J]. Advances in Applied Mechanics, 1962, 7: 55–129. doi: 10.1016/S0065-2156(08)70121-2
[20]	BENZEGGAGH M L, KENANE M. Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus [J]. Composites Science and Technology, 1996, 56(4): 439–449. doi: 10.1016/0266-3538(96)00005-X
[21]	LONG S, YAO X, ZHANG X. Delamination prediction in composite laminates under low-velocity impact [J]. Composite Structures, 2015, 132: 290–298. doi: 10.1016/j.compstruct.2015.05.037
[22]	XIN S H, WEN H M. Numerical study on the perforation of fiber reinforced plastic laminates struck by high velocity projectiles [J]. Journal of Strain Analysis for Engineering Design, 2012, 47(7): 513–523. doi: 10.1177/0309324712454650

Relative Articles

[1]	WU Shuogang, DU Chengxin, ZHOU Feng, GAO Guangfa, LYU Wenzheng, CHEN Xi. Damage characteristic of target penetrated by WF/Zr-MG and 93W rods[J]. Explosion And Shock Waves, 2024, 44(4): 043302. doi: 10.11883/bzycj-2023-0312
[2]	WANG Yang, LI Guangbin, WANG Guiji, TANG Enling, GAO Guowen, PENG Hui. A study of anti-penetration properties of continuous fiber-reinforced high-porosity composites[J]. Explosion And Shock Waves, 2024, 44(10): 101401. doi: 10.11883/bzycj-2023-0472
[3]	LIU Muhao, ZHANG Xianfeng, TAN Mengting, BAO Kuo, HAN Guoqing, LI Yi, SUN Weijing. A constitutive model for ceramic materials including microstructural features and damage factor[J]. Explosion And Shock Waves, 2024, 44(1): 013102. doi: 10.11883/bzycj-2023-0237
[4]	WANG Min, WEN Heming. Numerical simulations of response and failure of carbon nanotube/carbon fibre reinforced plastic laminates under impact loading[J]. Explosion And Shock Waves, 2022, 42(3): 033102. doi: 10.11883/bzycj-2021-0050
[5]	ZHENG Zhihao, REN Huiqi, LONG Zhilin, GUO Ruiqi, CAI Yang, LI Zhijian. A study on impact compression mechanical properties of PP/CF reinforced coral sand cement-based composites[J]. Explosion And Shock Waves, 2022, 42(7): 073104. doi: 10.11883/bzycj-2021-0297
[6]	ZHOU Zhixuan, WANG Mafa, LI Junling, MA Zhaoxia. Crater characteristics of carbon fiber/epoxy composite under hypervelocity impact in the velocity range from 3.0 km/s to 6.5 km/s[J]. Explosion And Shock Waves, 2022, 42(8): 083301. doi: 10.11883/bzycj-2021-0251
[7]	ZHANG Na, ZHOU Jian, XU Mingfeng, LI Hui, MA Guowei. Dynamic mechanical properties of basalt fiber engineered cementitious composites[J]. Explosion And Shock Waves, 2020, 40(5): 053101. doi: 10.11883/bzycj-2019-0351
[8]	CHEN Jianliang, LI Jicheng. Ballistic behavior of tungsten fiber/metallic glass matrix composite segmented rods[J]. Explosion And Shock Waves, 2020, 40(6): 063201. doi: 10.11883/bzycj-2019-0379
[9]	CHENG Yihao, DENG Guoqiang, LI Gan, SONG Chunming, QIU Yanyu, ZHANG Zhongwei, WANG Derong, WANG Mingyang. Model experiments on penetration of layered geological material targets by hypervelocity rob projectiles[J]. Explosion And Shock Waves, 2019, 39(7): 073301. doi: 10.11883/bzycj-2018-0230
[10]	Wang Jiagang, Yu Yonggang, Zhou Liangliang, Cao Hanxue, Liu Xi. Fracture analysis of glass fiber reinforced composite material under high temperature and pressure[J]. Explosion And Shock Waves, 2017, 37(6): 1107-1112. doi: 10.11883/1001-1455(2017)06-1107-06
[11]	Xu Ying, Shao Binbin, Xu Weiwei, Yang Jianming. Dynamic splitting tensile test of short carbon fiber C/SiC ceramic matrix composites[J]. Explosion And Shock Waves, 2017, 37(2): 315-322. doi: 10.11883/1001-1455(2017)02-0315-08
[12]	Hou Hai-zhou, Hu Yi-ting, Peng Jin-hua, Jin Jian-wei. Dynamic behavior and constitutive model of phenolic cotton fabric material under impact loading[J]. Explosion And Shock Waves, 2015, 35(6): 858-863. doi: 10.11883/1001-1455(2015)06-0858-06
[13]	CHEN Xiao-wei, LI Ji-cheng, ZHANG Fang-ju, CHEN Gang. Experimentalresearchonthepenetrationoftungsten-fiber/metallic glass-matrixcompositematerialpenetratorintosteeltarge[J]. Explosion And Shock Waves, 2012, 32(4): 346-354. doi: 10.11883/1001-1455(2012)04-0346-09
[14]	HUANG Xia, TANG Wen-hui, JIANG Bang-hai. Influencesofconstitutivemodelsonnumericallysimulatedresultsof X-raythermalshockwavesincompositematerials[J]. Explosion And Shock Waves, 2011, 31(6): 600-605. doi: 10.11883/1001-1455(2011)06-0600-06
[15]	LIU Ying, HE Zhang-quan, WU He-xiang, ZHANG Xin-chun. In-planedynamiccrushingoffunctionallylayeredmetalhoneycombs[J]. Explosion And Shock Waves, 2011, 31(3): 225-331. doi: 10.11883/1001-1455(2011)03-0225-07
[16]	LIU Hai-feng, NING Jian-guo. A meso-mechanical constitutive model of concrete subjected to impact loading[J]. Explosion And Shock Waves, 2009, 29(3): 261-267. doi: 10.11883/1001-1455(2009)03-0261-07
[17]	SHANG Bing, SHENG Jing, WANG Bao-zhen, HU Shi-sheng. Dynamic mechanical behavior and constitutive model of stainless steel[J]. Explosion And Shock Waves, 2008, 28(6): 527-531. doi: 10.11883/1001-1455(2008)06-0527-05
[18]	LIU Ming-shuang, LI Yu-long, TAO Liang, XU Fei, CHENG Lai-fei. A strain-rate-dependent dynamic constitutive model of 2D-C/SiC composites[J]. Explosion And Shock Waves, 2008, 28(5): 421-426. doi: 10.11883/1001-1455(2008)05-0421-06
[19]	JIANG Bang-hai, ZHANG Ruo-qi. Strain rate-dependent Tsai-Hill strength criteria for a carbon fiber woven reinforced composite[J]. Explosion And Shock Waves, 2006, 26(4): 333-338. doi: 10.11883/1001-1455(2006)04-0333-06

Supplements(0)

Cited By

Cited by

Periodical cited type(4)

1.	张琦，桂劲松. 基于粘结单元的空心钢管桩沉桩过程数值模拟. 珠江水运. 2023(12): 99-101 .
2.	王敏，文鹤鸣. 碳纳米管/碳纤维增强复合材料层合板低速冲击响应和破坏的数值模拟. 爆炸与冲击. 2022(03): 25-36 . 本站查看
3.	马玉秋，郭策，陈光明，戴宁，管吉钢，何湘鹏. 仿生轻质高强韧夹芯结构设计及其韧性性能分析. 机械科学与技术. 2022(05): 801-807 .
4.	马桢，吴伟，高志雄，王涛，张柱，常超. 弹道冲击下钛/钢复合波纹板的界面力学研究. 重庆理工大学学报(自然科学). 2021(07): 108-114 .