Study on JH-2 model of the ZrCuNiAlAg bulk amorphous alloy

SHI Yongxiang; SHI Dongmei; LI Wenzhao; YU Zhitong; SHANG Chunming

doi:10.11883/bzycj-2018-0221

Volume 39 Issue 9

Sep. 2019

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2019 > 39(9): 093104

Tan Zi-han, Xu Song-lin, Zhang Chao, Hu Shi-sheng. Dynamic compressive properties of two tungsten structure reinforced Zr-based metallic glass composites at different temperatures[J]. Explosion And Shock Waves, 2013, 33(3): 225-230. doi: 10.11883/1001-1455(2013)03-0225-06

Citation:

SHI Yongxiang, SHI Dongmei, LI Wenzhao, YU Zhitong, SHANG Chunming. Study on JH-2 model of the ZrCuNiAlAg bulk amorphous alloy[J]. Explosion And Shock Waves, 2019, 39(9): 093104. doi: 10.11883/bzycj-2018-0221

Citation:

PDF( 3688 KB)

Study on JH-2 model of the ZrCuNiAlAg bulk amorphous alloy

doi: 10.11883/bzycj-2018-0221

1.
Northwest Institute of Nuclear Techno logy, Xi’an 710024, Shaanxi, China
2.
Shijiazhuang Campus, Army Engineering University, Shijiazhuang 050003, Hebei, China

Received Date: 2018-06-20
Rev Recd Date: 2019-07-04
Publish Date: 2019-09-01

Abstract

Abstract

It is very important to establish the material model for the explosive forming and penetration simulation of ZrCuNiAlAg bulk amorphous alloy. In this paper, the JH-2 model parameters of the ZrCuNiAlAg bulk amorphous alloy were calculated by the experimental results. In order to verify the accuracy of the ZrCuNiAlAg bulk amorphous alloy JH-2 model, the finite element model of plate impact test was established by Autodyn. The deformation process of ZrCuNiAlAg bulk amorphous alloy under high pressure and high strain rate was simulated. Compared with the experimental results, the average velocity deviation of the free surface particles on the back surface of the target plate is less than 3%. It is shown that the JH-2 model of ZrCuNiAlAg bulk amorphous alloy can well describe the mechanical behavior of the material under large deformation, high strain rate, high pressure and other environmental conditions, and the accuracy of JH-2 model of ZrCuNiAlAg bulk amorphous alloy is verified.
- ZrCuNiAlAg bulk amorphous alloy,
- JH-2 model,
- Autodyn,
- finite element

FullText(HTML)

References(19)

References

[1]	INOUE A, TAKEUCHI A. Recent progress in bulk glassy, nanoquasicrystalline and nanocrystalline alloys [J]. Materials Science & Engineering A, 2004, 43(8): 16–30. DOI: 10.1016/j.msea.2003.10.159.
[2]	SHENG H W, LUO W K, ALAMGIR F M, et al. Atomic packing and short-to-medium-range order in metallic glasses [J]. Nature, 2006, 439(7075): 419–425. DOI: 10.1038/nature04421.
[3]	MIRACLE D B. A structural model for metallic glasses [J]. Nature Materials, 2004, 3(10): 692–702. DOI: 10.1038/nmat1205.
[4]	LI Yaoqi, SONG Min, HE Yuehui. Effect of quenching mode on the mechanical properties of a Zr₆₄Al₁₀Ni₁₅Cu₁₁ metallic glass [J]. Materials and Design, 2010, 31(7): 3555–3558. DOI: 10.1016/j.matdes.2010.01.040.
[5]	仇在宏, 杨元政, 赵德强, 等. 锆基块体非晶合金的力学性能研究进展 [J]. 金属功能材料, 2004, 11(5): 25–27. DOI: 10.3969/j.issn.1005-8192.2004.05.008. QIU Zaihong, YANG Yuanzheng, ZHAO Deqiang, et al. Progress in mechanical properties of Zr-based bulk amorphous alloys [J]. Metallic Functional Materials, 2004, 11(5): 25–27. DOI: 10.3969/j.issn.1005-8192.2004.05.008.
[6]	INOUE A, YOKOYAMA Y, SHINOHARA Y, et al. Preparation of bulk Zr-base amorphous alloy by a zone melting method [J]. Mater Trans, JIM, 1994, 35(2): 923–926. DOI: 10.2320/matertrans1989.35.923.
[7]	蒋维科. Zr基块体非晶合金的制备及力学性能研究[D]. 兰州: 兰州理工大学, 2013.
[8]	寇生中, 黄文军, 郑宝超, 等. Y元素添加对Zr基非晶形成和力学性能的影响 [J]. 铸造工程, 2010, 31(11): 1430–1431. KOU Shengzhong, HUANG Wenjun, ZHEN Baochao, et al. Glass forming ability and mechanical property of Zr-based alloy with the addition of yttrium [J]. Foundry Technology, 2010, 31(11): 1430–1431.
[9]	武晓峰, 张海峰, 李宏, 等. Zr基大块非晶合金的微区变形及力学性能 [J]. 中国有色金属学报, 2003, 13(6): 1368–1371. DOI: 10.3321/j.issn:1004-0609.2003.06.008. WU Xiaofeng, ZHANG Haifeng, LI Hong, et al. Deformation and mechanical properties of Zr-based bulk metallic glasses under nanoindenter [J]. The Chinese Journal of Nonferrous Metals, 2003, 13(6): 1368–1371. DOI: 10.3321/j.issn:1004-0609.2003.06.008.
[10]	MAO J, ZHANG H F, HUA M F, et al. Effects of casting temperature on mechanical properties of Zr-based metallic glasses [J]. Materials Science and Engineering, 2010, A527: 981–985. DOI: 10.1016/j.msea.2009.09.040.
[11]	邢秋玮. 锆基非晶合金力学性能影响因素的研究[D]. 兰州: 兰州理工大学, 2013. DOI: 10.7666/d.Y2445918.
[12]	李杳奇. Zr基块体非晶合金压缩力学性能的研究[D]. 长沙: 中南大学, 2011. DOI: 10.7666/d.y1915234.
[13]	MA G, ZHU Z, WANG Z, et al. Deformation behavior of the Zr_53.5Cu_26.5Ni₅Al₁₂Ag₃ bulk metallic glass over a wide range of strain rate and temperatures [J]. Journal of Materials Science & Technology, 2015, 31(9): 941–945. DOI: 10.1016/j.jmst.2015.06.001.
[14]	WANG Weihua, WEI Ping, WANG Limin, et al. Equation of state of bulk metallic glasses studied by an ultrasonic method [J]. Applied Physics Letters, 2001, 79(24): 3947–3949. DOI: 10.1063/1.1426272.
[15]	PAN M X, WANG W H, ZHAO D Q, et al. The equation of state and potential function of Zr₄₁Ti₁₄Cu_12.5Ni₁₀Be_22.5 bulk metallic glass [J]. Journal of Physics: Condensed Matter, 2002(14): 5665–5671. DOI: 10.1088/0953-8984/14/23/302.
[16]	潘念侨. Zr基非晶合金材料动态本构关系及其释能效应研究[D]. 南京: 南京理工大学: 2016.
[17]	石永相, 施冬梅. ZrCuNiAlAg块体非晶合金动静态力学性能研究 [J]. 热加工工艺, 2019, 48(6): 83–86. DOI: 10.14158/j.cnki.1001-3814.2019.06.020. SHI Yongxiang, SHI Dongmei. Study on dynamic and static mechanical properties of ZrCuNiAlAg bulk amorphous alloy [J]. Hot Working Technology, 2019, 48(6): 83–86. DOI: 10.14158/j.cnki.1001-3814.2019.06.020.
[18]	罗兴柏, 张玉令, 丁玉葵.爆炸力学理论教程[M]. 北京:国防工业出版社, 2016: 210.
[19]	杨震琦, 庞宝君, 王立闻, 等. JH-2模型及其在Al₂O₃陶瓷低速撞击数值模拟中的应用 [J]. 爆炸与冲击, 2010, 30(5): 464–468. DOI: 10.11883/1001-1455(2010)05-0463-09. YANG Zhenqi, PANG Baojun, WANG Liwen, et al. JH-2 model and its application to numericals imulation on Al₂O₃ ceramic under low-velocity impact [J]. Explosion and Shock Waves, 2010, 30(5): 464–468. DOI: 10.11883/1001-1455(2010)05-0463-09.

Relative Articles

[1]	LI Tao, CHANG Lijun, CHEN Taiwei, LIU Junyuan, XIAO Songming, CAI Zhihua. Establishment and verification of a head finite element model based on explosion injury[J]. Explosion And Shock Waves, 2024, 44(12): 121424. doi: 10.11883/bzycj-2024-0173
[2]	SHI Yanli, JI Sunhang, WANG Wenda, ZHENG Long. The lateral impact performance of concrete-filled steel tubular (CFST) members at high temperatures[J]. Explosion And Shock Waves, 2020, 40(4): 043303. doi: 10.11883/bzycj-2019-0293
[3]	ZHANG Yunfeng, LUO Xingbai, LIU Guoqing, SHI Dongmei. Construction and application of the JH-2 model for a Zr-based bulk metallic glass alloy[J]. Explosion And Shock Waves, 2020, 40(7): 073101. doi: 10.11883/bzycj-2019-0377
[4]	JING Lin, HAN Liangliang, ZHOU Pengtao. A numerical simulation of railway axles subjected to ballast impact based on SPH method[J]. Explosion And Shock Waves, 2018, 38(3): 603-615. doi: 10.11883/bzycj-2016-0265
[5]	SHI Zebin, ZHU Zheming, WANG Xiaomeng, WANG Xiong. A new testing method for mode Ⅰ crack initiation fracture toughness under middle-low speed impacts[J]. Explosion And Shock Waves, 2018, 38(6): 1247-1254. doi: 10.11883/bzycj-2017-0132
[6]	YU Xinlu, DONG Xinlong, PAN Shunji. Fracture behaviors of explosively driven TA2 alloy cylinders under different loadings[J]. Explosion And Shock Waves, 2018, 38(1): 148-154. doi: 10.11883/bzycj-2017-0014
[7]	Li Yueqiang, Yi Na, Xi Feng. Assessment on single degree of freedom modelin steel column analysis of anti-detonation[J]. Explosion And Shock Waves, 2017, 37(5): 957-963. doi: 10.11883/1001-1455(2017)05-0957-07
[8]	Li Jie, Li Meng-shen, Li Hong, Shi Cun-cheng. Numerical modeling of projectile penetration into dry sand[J]. Explosion And Shock Waves, 2015, 35(5): 633-640. doi: 10.11883/1001-1455(2015)05-0633-08
[9]	Fan Zhi-geng, Chen Chang-qing, Wan Qiang. Finite element simulation on the rate-dependent properties of aluminum foams[J]. Explosion And Shock Waves, 2014, 34(6): 742-747. doi: 10.11883/1001-1455(2014)06-0742-06
[10]	ZHANG Zhi-ying, PENG Lei, LIU Run-sheng, YANG Zheng, ZHAO Fu-xing. Astudyonexplosionweldingdefectsoflarge-sizedplates[J]. Explosion And Shock Waves, 2012, 32(1): 51-54. doi: 10.11883/1001-1455(2012)01-0051-04
[11]	XIE Fan, ZHANG Tao, CHEN Ji-en, LIU Tu-guang. Updatingofthestresstriaxialitybyfiniteelementanalysi[J]. Explosion And Shock Waves, 2012, 32(1): 8-14. doi: 10.11883/1001-1455(2012)01-0008-07
[12]	LI Qiang, LI Peng-hui, ZHAO Jun-guan, RU Zhan-yong. Residualstressvariationinanautofrettagedbarrelunderimpactload[J]. Explosion And Shock Waves, 2011, 31(6): 635-640. doi: 10.11883/1001-1455(2011)06-0635-06
[13]	ZHANG Xiao-tian, JIA Guang-hui, HUANG Hai. Simulationofhypervelocity-impactdebrisclouds usingaLagrangeFEM withnodeseparation[J]. Explosion And Shock Waves, 2010, 30(5): 499-504. doi: 10.11883/1001-1455(2010)05-0499-06
[14]	JIANG Dong, LI Yong-chi, YU Shao-juan, DENG Shi-chun. PenetrationofconfinedAD95ceramiccompositetargets bytungstenlongrods[J]. Explosion And Shock Waves, 2010, 30(1): 91-95. doi: 10.11883/1001-1455(2010)01-0091-05
[15]	YANG Zhen-qi, PANG Bao-jun, WANG Li-wen, CHI Run-qiang. JH-2modelanditsapplicationtonumericalsimulationonAl2O3ceramic underlow-velocityimpact[J]. Explosion And Shock Waves, 2010, 30(5): 463-471. doi: 10.11883/1001-1455(2010)05-0463-09
[16]	DONG Jie, LI Yong-chi, CHEN Xue-dong. A phenomenological damage model of microvoids and its application[J]. Explosion And Shock Waves, 2008, 28(5): 443-447. doi: 10.11883/1001-1455(2008)05-0443-05
[17]	WANG Ji, WANG Xiao-jun, BIAN Liang. Linking of smoothed particle hydrodynamics method to standard finite element method and its application in impact dynamics[J]. Explosion And Shock Waves, 2007, 27(6): 522-528. doi: 10.11883/1001-1455(2007)06-0522-07
[18]	ZHENG Bo, WANG An-wen. Finite element analysis for elastic-plastic dynamic postbuckling of bars subjected to axial impact[J]. Explosion And Shock Waves, 2007, 27(2): 126-130. doi: 10.11883/1001-1455(2007)02-0126-05
[19]	SONG Shun-cheng, CAI Hong-nian, WANG Fu-chi. 3D-numerical simulations on impact and perforation of concrete targets by projectiles[J]. Explosion And Shock Waves, 2006, 26(1): 1-6. doi: 10.11883/1001-1455(2006)01-0001-06