Volume 39 Issue 12
Dec.  2019
Turn off MathJax
Article Contents
WANG Weizhan, ZHAO Taiyong, FENG Shunshan, YANG Baoliang, LI Xiaojun, CHEN Zhigang. Numerical simulation study on penetration of a 12.7 mm kinetic energy bullet into a composite armor[J]. Explosion And Shock Waves, 2019, 39(12): 123301. doi: 10.11883/bzycj-2018-0425
Citation: WANG Weizhan, ZHAO Taiyong, FENG Shunshan, YANG Baoliang, LI Xiaojun, CHEN Zhigang. Numerical simulation study on penetration of a 12.7 mm kinetic energy bullet into a composite armor[J]. Explosion And Shock Waves, 2019, 39(12): 123301. doi: 10.11883/bzycj-2018-0425

Numerical simulation study on penetration of a 12.7 mm kinetic energy bullet into a composite armor

doi: 10.11883/bzycj-2018-0425
  • Received Date: 2018-10-29
  • Rev Recd Date: 2019-03-12
  • Publish Date: 2019-12-01
  • Ballistic limit tests were carried out by using a ballistic gun system for the ceramic composite armors obliquely placed with the angles of 0° − 60°. The influences of the oblique angles were analyzed on the ballistic limits, steel core mass change and damage forms of armor-piercing bullets. The numerical simulations were performed to verify the above experimental results. Based on the fact that the calculated results were in agreement with the experimental ones, the influences of the oblique angles were further explored on the deflection angles of the bullet steel cores penetrating through the target plates, and the thicknesses of the equivalent Q235 steel target plates. Results show that with increasing the oblique angles of the ceramic composite targets: (1) the ballistic limit obeys an exponential increase law; (2) at the same ballistic limit, the ratio of the limit penetration depth of the Q235 steel target plate by the armor-piercing bullet to the equivalent thickness of the limit penetration depth of the obliquely-placed ceramic composite target by the armor-piercing bullet increases; (3) the integrity of the bullet steel core decreases gradually, its deflection angle increases reversely.
  • loading
  • [1]
    孙英. 枪弹对陶瓷/凯芙拉复合靶板的侵彻机理研究[D]. 南京: 南京理工大学, 2010: 66−68. DOI: 10.766/d.y1697767.
    [2]
    ROSEBERG Z, TSALIAH J. Applying Tate’s model for the interaction of long rod projectiles with ceramic targets [J]. International Journal of Impact Engineering, 1990, 9(2): 247–251. DOI: 10.1016/0734-743X(90)90016-O.
    [3]
    ROSENBERG Z, DEKEL E. 终点弹道学[M]. 钟方平, 译. 北京: 国防工业出版社, 2014: 123−134.
    [4]
    李继承, 陈小伟. 柱形长杆弹侵彻的界面击溃分析 [J]. 爆炸与冲击, 2011, 31(2): 141–147.

    LI Jicheng, CHEN Xiaowei. Theoretical analysis on the interface defeat of a long rod penetration [J]. Explosion and Shock Waves, 2011, 31(2): 141–147.
    [5]
    ANDERSON C E Jr, HOLMQUIST T J, ORPHAL D L, et al. Dwell and interface defeat on borosilicate glass [J]. International Journal of Applied Ceramic Technology, 2010, 7(6): 776–786. DOI: 10.1111/j.1744-7402.2009.02478.x.
    [6]
    CHI R Q, SERJOUEI A, SRIDHAR I, et al. Pre-stress effect on confined ceramic armor ballistic performance [J]. International Journal of Impact Engineering, 2015, 84: 159–170. DOI: 10.1016/j.ijimpeng.2015.05.011.
    [7]
    CHI R Q, SERJOUEI A, SRIDHAR I, et al. Ballistic impact on bi-layer alumina/aluminum armor: a semi-analytical approach [J]. International Journal of Impact Engineering, 2013, 52: 37–46. DOI: 10.1016/j.ijimpeng.2012.10.001.
    [8]
    李继承, 陈小伟. 尖锥头长杆弹侵彻的界面击溃分析 [J]. 力学学报, 2011, 43(1): 63–70. DOI: 10.6052/0459-1879-2011-1-lxxb2009-782.

    LI Jicheng, CHEN Xiaowei. Theoretical analysis on the interface defeat of a conical-nosed projectile penetration [J]. Chinese Journal of Theoretical and Applied Mechanics, 2011, 43(1): 63–70. DOI: 10.6052/0459-1879-2011-1-lxxb2009-782.
    [9]
    LI J C, CHEN X W, NING F. Comparative analysis on the interface defeat between the cylindrical and conical-nosed long rods [J]. International Journal of Protective Structures, 2014, 5(1): 21–46. DOI: 10.1260/2041-4196.5.1.21.
    [10]
    LI J C, CHEN X W, NING F, et al. On the transition from interface defeat to penetration in the impact of long rod onto ceramic targets [J]. International Journal of Impact Engineering, 2015, 83: 37–46. DOI: 10.1016/j.ijimpeng.2015.04.003.
    [11]
    谈梦婷, 张先锋, 何勇, 等. 长杆弹撞击装甲陶瓷的界面击溃效应数值模拟 [J]. 兵工学报, 2016, 37(4): 627–634. DOI: 10.3969/j.issn.1000-1093.2016.04.008.

    TAN Mengting, ZHANG Xianfeng, HE Yong, et al. Numerical simulation on interface defeat of ceramic armor impacted by long-rod projectile [J]. Acta Armamentarii, 2016, 37(4): 627–634. DOI: 10.3969/j.issn.1000-1093.2016.04.008.
    [12]
    汪建锋, 傅苏黎, 丁华东. 陶瓷基装甲抗枪弹机理研究现状 [J]. 装甲兵工程学院学报, 2004, 18(3): 62–65; 72. DOI: 10.3969/j.issn.1672-1497.2004.03.018.

    WANG Jianfeng, FU Suli, DING Huadong. Current situation in anti-ballistic mechanism about ceramic matrix armor [J]. Journal of Academy of Armorde Force Engineering, 2004, 18(3): 62–65; 72. DOI: 10.3969/j.issn.1672-1497.2004.03.018.
    [13]
    丁华东, 许艺, 巴国召, 等. 陶瓷基复合装甲防12.7 mm穿甲燃烧弹的靶试研究: Ⅳ [J]. 装甲兵工程学院学报, 2013, 27(2): 75–79. DOI: 10.11732/j.issn.1672-1497.2013.02.016.

    DING Huadong, XU Yi, BA Guozhao, et al. Ceramic matrix composite armour against the 12.7 mm wear incendiary target test research: Ⅳ [J]. Journal of Academy of Armorde Force Engineering, 2013, 27(2): 75–79. DOI: 10.11732/j.issn.1672-1497.2013.02.016.
    [14]
    丁华东, 方宁象, 王玉湘, 等. 陶瓷基复合装甲防12.7 mm穿甲燃烧弹的靶试研究: Ⅲ [J]. 装甲兵工程学院学报, 2013, 27(1): 86–89. DOI: 10.11732/j.issn.1672-1497.2013.01.018.

    DING Huadong, FANG Ningxiang, WANG Yuxiang, et al. Target experiment about ceramics-based composite armour against 12.7 mm armor piercing incendiary: Ⅲ [J]. Journal of Academy of Armored Force Engineering, 2013, 27(1): 86–89. DOI: 10.11732/j.issn.1672-1497.2013.01.018.
    [15]
    丁华东, 方宁象, 刘云峰, 等. 陶瓷基复合装甲防12.7 mm穿甲燃烧弹的靶试研究: Ⅱ [J]. 装甲兵工程学院学报, 2012, 26(2): 77–79. DOI: 10.3969/j.issn.1672-1497.2012.02.017.

    DING Huadong, FANG Ningxiang, LIU Yunfeng, et al. Ceramic matrix composite armour against the 12.7 mm wear incendiary target test research:Ⅱ [J]. Journal of Academy of Armorde Force Engineering, 2012, 26(2): 77–79. DOI: 10.3969/j.issn.1672-1497.2012.02.017.
    [16]
    丁华东, 方宁象, 刘云峰, 等. 陶瓷基复合装甲防12.7 mm穿甲燃烧弹的靶试研究:Ⅰ [J]. 装甲兵工程学院学报, 2012, 26(1): 78–81. DOI: 10.3969/j.issn.1672-1497.2012.01.017.

    DING Huadong, FANG Ningxiang, LIU Yunfeng, et al. Ceramic matrix composite armour against the 12.7 mm wear incendiary targettestresearch:Ⅰ [J]. Journal of Academy of Armorde Force Engineering, 2012, 26(1): 78–81. DOI: 10.3969/j.issn.1672-1497.2012.01.017.
    [17]
    陈斌, 于起峰, 杨跃能, 等. 30 mm半穿甲弹斜侵彻陶瓷/钢复合装甲的弹着角效应研究 [J]. 国防科技大学学报, 2009, 31(6): 139–143. DOI: 10.3969/j.issn.1001-2486.2009.06.026.

    CHEN Bin, YU Qifeng, YANG Yueneng, et al. Effect of impact angle of 30 mm semi-AP projectile obliquely penetrating ceramic/steel targets [J]. Journal of National University of Defense Technology, 2009, 31(6): 139–143. DOI: 10.3969/j.issn.1001-2486.2009.06.026.
    [18]
    郭英男. 陶瓷面板复合装甲抗冲击性能及其构型设计研究[D]. 西安: 西北工业大学, 2016: 124−126.

    GUO Yingnan. Research on the ballistic impact behavior and configuration of ceramic faced composite armour [D]. Xi’an: Northwestern Polytechnical University, 2016: 124−126.
    [19]
    侯二永. 陶瓷间隙靶抗12.7 mm穿甲燃烧弹机理及性能研究[D]. 长沙: 国防科学技术大学, 2008: 56−61.

    HOU Eryong. Investigation of mechanism and performance of spaced ceramic target under impact of 12.7 mm armor piercing projectile [D]. Changsha: National University of Defense Technology, 2008: 56−61.
    [20]
    李小军, 王维占, 张银, 等. 7.62 mm穿甲子弹斜侵彻复合装甲仿真研究 [J]. 装甲兵工程学院学报, 2018, 32(5): 71–75. DOI: 10.3969/j.issn.1672-1497.2018.05.013.

    LI Xiaojun, WANG Weizhan, ZHANG Yin, et al. Simulation study on oblique penetration of 7.62 mm armour-piercing projectile into composite armour [J]. Journal of Academy of Armored Force Engineering, 2018, 32(5): 71–75. DOI: 10.3969/j.issn.1672-1497.2018.05.013.
    [21]
    张国伟. 终点效应及其应用技术[M]. 北京: 国防工业出版社, 2006: 33−56.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(16)  / Tables(4)

    Article Metrics

    Article views (4814) PDF downloads(134) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return