Oblique impact resistance of a bionic thin-walled tube based on antles osteon

HUO Peng; XU Shucai; FAN Xiaowen; LI Jianping; YANG Xin; HUANG Han

doi:10.11883/bzycj-2020-0035

Volume 40 Issue 11

Nov. 2020

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2020 > 40(11): 113102

HUO Peng, XU Shucai, FAN Xiaowen, LI Jianping, YANG Xin, HUANG Han. Oblique impact resistance of a bionic thin-walled tube based on antles osteon[J]. Explosion And Shock Waves, 2020, 40(11): 113102. doi: 10.11883/bzycj-2020-0035

Citation:

HUO Peng, XU Shucai, FAN Xiaowen, LI Jianping, YANG Xin, HUANG Han. Oblique impact resistance of a bionic thin-walled tube based on antles osteon[J]. Explosion And Shock Waves, 2020, 40(11): 113102. doi: 10.11883/bzycj-2020-0035

Citation:

PDF( 1238 KB)

Oblique impact resistance of a bionic thin-walled tube based on antles osteon

doi: 10.11883/bzycj-2020-0035

HUO Peng^{1, 2
,},
XU Shucai²,
FAN Xiaowen^{1, 2},
LI Jianping^{1
,
,},
YANG Xin¹,
HUANG Han²

1.
College of Mechanical and Electrical Engineering, Agricultural University of Hebei, Baoding 071000, Hebei, China
2.
State Key Laboratory of Automotive Safety and Energy, Tsinghua University, Beijing 100084, China

Received Date: 2020-02-14
Rev Recd Date: 2020-08-14
Publish Date: 2020-11-05

Abstract

Abstract

Some achievements have been made in the study on mechanical properties of antler, but they have not been applied in engineering practice, especially in the study of thin-walled tubes similar to antler crashworthiness. In order to improve the crashworthiness and energy absorption of the thin-walled tube structures, a bionic thin-walled tube with the same inner diameter and equal gradient of outer diameter was designed based on the structural characteristics of antler bone and the principle of structural bionics. The finite element method was used to simulate the energy absorption characteristics of 75 kinds of bionic thin-walled tube structures under the oblique impacts with the impact angles of 10°, 20° and 30°. The polynomial regression element model and multi-objective particle swarm optimization algorithm were used to optimize, and the Pareto front optimization principle was used to obtain the optimal allocation scheme of each target. The minimum distance selection method was used in optimization analysis to obtain the optimal structural design parameters of each scheme. The optimization method used in this study can provide reference for the follow-up research on the crashworthiness of thin-walled tubes, and the optimal structure of bionic thin-walled tubes can provide reference for practical engineering application. The results show that when only considering a single impact angle, the optimal number of biomimetic layers n is 6, and the parameter combination of maximum wall thickness and thickness gradient t_max-a is 2.84 mm-0.38 mm, 2.89 mm-0.29 mm, 2.91 mm-0.34 mm, respectively under 10°, 20° and 30° impact angles. Considering various impact angle weight factors and different configuration schemes, the optimal number of biomimetic layers n is 6, and the parameter combination of maximum wall thickness and thickness gradient t_max-a is 2.95 mm-0.28 mm, 2.92 mm-0.30 mm and 2.85 mm-0.33 mm, respectively.
- thin-walled tube,
- structural bionics,
- oblique impact,
- crashworthiness,
- multi-objective optimization

FullText(HTML)

References(26)

References

[1]	BAROUTAJI A, SAJJIA M, OLABI A G. On the crashworthiness performance of thin-walled energy absorbers: recent advances and future developments [J]. Thin-Walled Structures, 2017, 118: 137–163. DOI: 10.1016/j.tws.2017.05.018.
[2]	徐峰祥, 张锁, 武昆迎. 厚度幂指数分布管状结构耐撞性设计准则与方法研究 [J]. 爆炸与冲击, 2019, 39(3): 035103. DOI: 10.11883/bzycj-2018-0013. XU F X, ZHANG S, WU K Y. Study on crashworthiness design criteria and method of tubular structures with power exponent distribution of thickness [J]. Explosion and Shock Waves, 2019, 39(3): 035103. DOI: 10.11883/bzycj-2018-0013.
[3]	郝文乾, 卢进帅, 黄睿, 等. 轴向冲击载荷下薄壁折纹管的屈曲模态与吸能 [J]. 爆炸与冲击, 2015, 35(3): 380–385. DOI: 10.11883/1001-1455-(2015)03-0380-06. HAO W Q, LU J S, HUANG R, et al. Buckling and energy absorption properties of thin-walled corrugated tubes under axial impacting [J]. Explosion and Shock Waves, 2015, 35(3): 380–385. DOI: 10.11883/1001-1455-(2015)03-0380-06.
[4]	谭丽辉, 徐涛, 崔晓梅, 等. 带有圆弧形凹槽金属薄壁圆管抗撞性优化设计 [J]. 爆炸与冲击, 2014, 34(5): 547–553. DOI: 10.11883/1001-1455(2014)05-0547-07. TAN L H, XU T, CUI X M, et al. Design optimization for crashworthiness of metal thin-walled cylinders with circular arc indentations [J]. Explosion and Shock Waves, 2014, 34(5): 547–553. DOI: 10.11883/1001-1455(2014)05-0547-07.
[5]	张涛, 刘土光, 肖汉林, 等. 高速冲击下薄壁组合结构吸能特性研究 [J]. 爆炸与冲击, 2006, 26(5): 395–403. ZHANG T, LIU T G, XIAO H L, et al. Energy absorption performance of thin-walled structures with triggering holes subjected to high-speed axial impact [J]. Explosion and Shock Waves, 2006, 26(5): 395–403.
[6]	殷之平, 李玉龙, 黄其青. 含诱导缺陷薄壁圆管耐撞性优化设计 [J]. 爆炸与冲击, 2011, 31(4): 418–422. DOI: 10.11883/1001-1455(2011)04-0418-05. YIN Z P, LI Y L, HUANG Q Q. Optimal crashworthiness design of thin-walled circular tubes with triggering holes [J]. Explosion and Shock Waves, 2011, 31(4): 418–422. DOI: 10.11883/1001-1455(2011)04-0418-05.
[7]	李松晏, 郑志军, 虞吉林. 高速列车吸能结构设计和耐撞性分析 [J]. 爆炸与冲击, 2015, 35(2): 164–170. DOI: 10.11883/1001-1455(2015)02-0164-07. LI S Y, ZHENG Z J, YU J L. Energy-absorbing structure design and crashworthiness analysis of high-speed trains [J]. Explosion and Shock Waves, 2015, 35(2): 164–170. DOI: 10.11883/1001-1455(2015)02-0164-07.
[8]	SUN G Y, LIU T Y, FANG J G, et al. Configurational optimization of multi-cell topologies for multiple oblique loads [J]. Structural and Multidisciplinary Optimization, 2018, 57(2): 469–488. DOI: 10.1007/s00158-017-1839-5.
[9]	ALKHATIB S E, TARLOCHAN F, HASHEM A, et al. Collapse behavior of thin-walled corrugated tapered tubes under oblique impact [J]. Thin-Walled Structures, 2018, 122: 510–528. DOI: 10.1016/j.tws.2017.10.044.
[10]	ASANJARANI A, DIBAJIAN S H, MAHDIAN A. Multi-objective crashworthiness optimization of tapered thin-walled square tubes with indentations [J]. Thin-Walled Structures, 2017, 116: 26–36. DOI: 10.1016/j.tws.2017.03.015.
[11]	亓昌, 董方亮, 杨姝, 等. 锥形多胞薄壁管斜向冲击吸能特性仿真研究 [J]. 振动与冲击, 2012, 31(24): 102–107. DOI: 10.13465/j.cnki.jvs.2012.24.009. QI C, DONG F L, YANG S, et al. Energy-absorbing characteristics of a tapered multi-cell thin-walled tube under oblique impact [J]. Journal of Vibration and Shock, 2012, 31(24): 102–107. DOI: 10.13465/j.cnki.jvs.2012.24.009.
[12]	任露泉, 梁云虹. 仿生学导论[M]. 北京: 科学出版社, 2016: 208-210.
[13]	HUANG H, XU S C. Crashworthiness analysis and bionic design of multi-cell tubes under axial and oblique impact loads [J]. Thin-Walled Structures, 2019, 144: 106333. DOI: 10.1016/j.tws.2019.106333.
[14]	许述财, 邹猛, 魏灿刚, 等. 仿竹结构薄壁管的轴向耐撞性分析及优化 [J]. 清华大学学报(自然科学版), 2014, 54(3): 299–304. DOI: 10.16511/J.CNKI.QHDXXB.2014.03.007. XU S C, ZOU M, WEI C G, et al. Axial crashworthiness analysis and optimization of a bionic thin-walled tube based on bamboo structure [J]. Journal of Tsinghua University (Science and Technology), 2014, 54(3): 299–304. DOI: 10.16511/J.CNKI.QHDXXB.2014.03.007.
[15]	ZOU M, XU S C, WEI C G, et al. A bionic method for the crashworthiness design of thin-walled structures inspired by bamboo [J]. Thin-Walled Structures, 2016, 101: 222–230. DOI: 10.1016/j.tws.2015.12.023.
[16]	SONG J F, XU S C, WANG H X, et al. Bionic design and multi-objective optimization for variable wall thickness tube inspired bamboo structures [J]. Thin-Walled Structures, 2018, 125: 76–88. DOI: 10.1016/j.tws.2018.01.010.
[17]	LI Z, DUAN L B, CHEN T, et al. Crashworthiness analysis and multi-objective design optimization of a novel lotus root filled tube (LFT) [J]. Structural and Multidisciplinary Optimization, 2018, 57(2): 865–875. DOI: 10.1007/s00158-017-1782-5.
[18]	YIN H F, XIAO Y Y, WEN G L, et al. Multi-objective robust optimization of foam-filled bionic thin-walled structures [J]. Thin-Walled Structures, 2016, 109: 332–343. DOI: 10.1016/j.tws.2016.10.011.
[19]	CURREY J D. Bones: structure and mechanics [M]. New Jersey: Princeton University Press, 2006.
[20]	PICAVET P P, BALLIGAND M. Organic and mechanical properties of Cervidae antlers: a review [J]. Veterinary Research Communications, 2016, 40(3-4): 141–147. DOI: 10.1007/s11259-016-9663-8.
[21]	FANG Z Q, CHEN B, LIN S Y, et al. Investigation of inner mechanism of anisotropic mechanical property of antler bone [J]. Journal of the Mechanical Behavior of Biomedical Materials, 2018, 88: 1–10. DOI: 10.1016/j.jmbbm.2018.07.043.
[22]	CURREY J D, LANDETE-CASTILLEJOS T, ESTEVEZ J, et al. The mechanical properties of red deer antler bone when used in fighting [J]. Journal of Experimental Biology, 2009, 212(24): 3985–3993. DOI: 10.1242/jeb.032292.
[23]	DAVISON K S, SIMINOSKI K, ADACHI J D, et al. Bone strength: the whole is greater than the sum of its parts [J]. Seminars in Arthritis and Rheumatism, 2006, 36(1): 22–31. DOI: 10.1016/j.semarthrit.2006.04.002.
[24]	HENSHAW J. Antlers: the unbrittle bones of contention [J]. Nature, 1971, 231(5303): 469. DOI: 10.1038/231469a0.
[25]	CHEN P Y, STOKES A G, MCKITTRICK J. Comparison of the structure and mechanical properties of bovine femur bone and antler of the North American elk (cervus elaphus canadensis) [J]. Acta Biomaterialia, 2009, 5(2): 693–706. DOI: 10.1016/j.actbio.2008.09.011.
[26]	杨欣, 范晓文, 许述财, 等. 仿虾螯结构薄壁管设计及耐撞性分析 [J]. 爆炸与冲击, 2020, 40(4): 043301. DOI: 10.11883/bzycj-2019-0280. YANG X, FAN X W, XU S C, et al. Design and crashworthiness analysis of thin-walled tubes based on a shrimp chela structure [J]. Explosion and Shock Waves, 2020, 40(4): 043301. DOI: 10.11883/bzycj-2019-0280.

Relative Articles

[1]	ZHAO Zhujie, HOU Hailiang, WU Xiaowei, LI Yongqing, LI Dian, JIANG Anbang. A review of the dynamic response and protection mechanism of liquid filled structures under impact loads[J]. Explosion And Shock Waves, 2024, 44(5): 051101. doi: 10.11883/bzycj-2023-0328
[2]	LI Heng, MA Guorui, LIU Yudi, ZHANG Haiming. A remote sensing imagery-based model for assessment of building damage induced by large-equivalent explosions[J]. Explosion And Shock Waves, 2024, 44(3): 031407. doi: 10.11883/bzycj-2023-0331
[3]	JIAO Chongxi, ZHONG Wei, WANG Mu, MEI Xijie, QIU Xinming. A fast equivalent-isotropic-plate model for stiffened circular plates under pulse loading[J]. Explosion And Shock Waves, 2024, 44(3): 031402. doi: 10.11883/bzycj-2023-0308
[4]	WANG Min, WEN Heming. Numerical simulations of response and failure of carbon nanotube/carbon fibre reinforced plastic laminates under impact loading[J]. Explosion And Shock Waves, 2022, 42(3): 033102. doi: 10.11883/bzycj-2021-0050
[5]	ZHANG Tianhui, DENG Jianqiang, LIU Zhifang, LI Shiqiang. Compression deformation and energy absorption of thin-walled structures with arc-shaped origami patterns[J]. Explosion And Shock Waves, 2020, 40(7): 071405. doi: 10.11883/bzycj-2019-0355
[6]	YANG Qiang, XI Xulong, BAI Chunyu, LIU Xiaochuan. Dynamic tensile response and failure mechanism of hi-lock bolt joint[J]. Explosion And Shock Waves, 2020, 40(10): 103102. doi: 10.11883/bzycj-2019-0475
[7]	WANG Hao, PAN Xin, WU Haijun, PI Aiguo, LI Jinzhu, HUANG Fenglei. Energy dissipation analysis of elliptical truncated oval rigid projectilepenetrating stiffened plate[J]. Explosion And Shock Waves, 2019, 39(10): 103203. doi: 10.11883/bzycj-2018-0350
[8]	LI Rui, HUANG Zhengxiang, ZU Xudong, XIAO Qiangqiang, JIA Xin. Spallation of targets subjected to vertical penetraion of explosively-formed projectiles[J]. Explosion And Shock Waves, 2018, 38(5): 1039-1044. doi: 10.11883/bzycj-2017-0055
[9]	Zhao Zhiheng, Ru Nan, Ma Yong, Zhang Chao, Li Chunfeng. Impact load driven by high-power pulsed electromagnetic force[J]. Explosion And Shock Waves, 2016, 36(5): 710-714. doi: 10.11883/1001-1455(2016)05-0710-05
[10]	JING lin, WANG Zhi-hua, ZHAO Long-mao, YAN Qing-rong. Dynamicplasticresponseoffoamsandwichbeams subjectedtoimpactloading[J]. Explosion And Shock Waves, 2010, 30(6): 561-568. doi: 10.11883/1001-1455(2010)06-0561-08
[11]	QIN Jian, ZHANG Zhen-hua. Ascalingmethodforpredictingdynamicresponsesofstiffenedplates madeofmaterialsdifferentfromexperimentalmodels[J]. Explosion And Shock Waves, 2010, 30(5): 511-516. doi: 10.11883/1001-1455(2010)05-0511-06
[12]	ZHU Xi, MOU Jin-Lei, WANG Heng, ZHANG Zhen-Hua. Damage modes of stiffened plates subjected to underwater explosion load[J]. Explosion And Shock Waves, 2010, 30(3): 225-231. doi: 10.11883/1001-1455(2010)03-0225-07
[13]	ZHAO Zheng, LI Xiao-jie, TAO Gang. Numerical simulation of the process of pore collapse under shock load[J]. Explosion And Shock Waves, 2009, 29(3): 289-294. doi: 10.11883/1001-1455(2009)03-0289-06
[14]	MU Jin-lei, ZHU Xi, ZHANG Zhen-hua, WANG Heng. Failure modes of stiffened plates subjected to underwater explosion[J]. Explosion And Shock Waves, 2009, 29(5): 457-462. doi: 10.11883/1001-1455(2009)05-0457-06
[15]	ZHOU Feng-hua, WANG Yong-gang. Factors controlling sizes of brittle fragments due to impact loadings[J]. Explosion And Shock Waves, 2008, 28(4): 298-303. doi: 10.11883/1001-1455(2008)04-0298-06
[16]	WANG Yong-hu, SHI Xiu-hua. Review on research and development of water-entry impact problem[J]. Explosion And Shock Waves, 2008, 28(3): 276-282. doi: 10.11883/1001-1455(2008)03-0276-07
[17]	DENG Shu-sheng, GENG Ji-hui, TAN Jun-jie. Numerical calculation of blast loads from a bursting pressurized vessel[J]. Explosion And Shock Waves, 2007, 27(1): 1-6. doi: 10.11883/1001-1455(2007)01-0001-06
[18]	HOU Hai-liang, ZHU Xi, GU Mei-bang. Study on failure mode of stiffened plate and optimized design of structure subjected to blast load[J]. Explosion And Shock Waves, 2007, 27(1): 26-33. doi: 10.11883/1001-1455(2007)01-0026-08
[19]	HU Liu-qing, LI Xi-bing, GONG Sheng-wu. Simulation on dynamic response of crack subjected to impact loading[J]. Explosion And Shock Waves, 2006, 26(3): 214-221. doi: 10.11883/1001-1455(2006)03-0214-08
[20]	ZHANG Yi-fen, ZHAO Long-mao. A numerical simulation on the deformation of heterogeneous metallic foams subjected to impact loading[J]. Explosion And Shock Waves, 2006, 26(1): 33-38. doi: 10.11883/1001-1455(2006)01-0033-06