Calculation of equivalent charge weight per delay and vibration velocity prediction for millisecond delay blasting

HE Li; YANG Renshu; ZHONG Dongwang; LI Peng; WU Chunping; CHEN Jiangwei

doi:10.11883/bzycj-2020-0363

Volume 41 Issue 9

Sep. 2021

Turn off MathJax

Article Contents

Article Navigation > Explosion And Shock Waves > 2021 > 41(9): 095201

HE Li, YANG Renshu, ZHONG Dongwang, LI Peng, WU Chunping, CHEN Jiangwei. Calculation of equivalent charge weight per delay and vibration velocity prediction for millisecond delay blasting[J]. Explosion And Shock Waves, 2021, 41(9): 095201. doi: 10.11883/bzycj-2020-0363

Citation:

HE Li, YANG Renshu, ZHONG Dongwang, LI Peng, WU Chunping, CHEN Jiangwei. Calculation of equivalent charge weight per delay and vibration velocity prediction for millisecond delay blasting[J]. Explosion And Shock Waves, 2021, 41(9): 095201. doi: 10.11883/bzycj-2020-0363

Citation:

HE Li, YANG Renshu, ZHONG Dongwang, LI Peng, WU Chunping, CHEN Jiangwei. Calculation of equivalent charge weight per delay and vibration velocity prediction for millisecond delay blasting[J]. Explosion And Shock Waves, 2021, 41(9): 095201. doi: 10.11883/bzycj-2020-0363

PDF( 1425 KB)

Calculation of equivalent charge weight per delay and vibration velocity prediction for millisecond delay blasting

doi: 10.11883/bzycj-2020-0363

1.
School of Civil and Resource Engineering, University of Science and Technology Beijing, Beijing 100083, China
2.
Hubei Province Key Laboratory of Systems Science in Metallurgical Process, Wuhan University of Science and Technology, Wuhan 430065, Hubei, China
3.
Key Laboratory of Geotechnical Mechanics and Engineering of the Ministry of Water Resources, Yangtze River Scientific Research Institute, Wuhan 430010, Hubei, China
4.
Beijing General Research Institute of Mining and Metallu, Beijing 100160, China
5.
China Construction Seventh Engineering Bureau Co., Ltd., Zhengzhou 450004, Henan, China

Received Date: 2020-09-30
Rev Recd Date: 2020-11-20

Available Online: 2021-08-25

Publish Date: 2021-09-14

Abstract

Abstract

Drilling and blasting is the most economical rock fracture technology in water conservancy, transportation, mining and tunnel engineering. And the application of nonel detonator network in rock blasting is still the most widely used initiation method in engineering blasting practice. Due to the detonator delay error, there is a deviation between the actual initiation time and designed initiation time in the Nonel detonation network, which will cause the change of blasting time sequence and the overlapping of blast-holes. There are detonator dispersion phenomenon with the same delay time and superposition effect for seismic waves with different delay time, which brings great trouble to the value of charge weight per delay and the prediction of particle peak vibration velocity. In order to the predict particle peak vibration velocity more accurately and efficiently, the millisecond delay blasting test was conducted, and the calculation model of vibration velocity for group blast-hole simultaneous blasting with dispersed charge was established. The influence of the blast-hole number on the equivalent charge weight for simultaneous blasting and its value selection method were studied and constructed. The modified particle peak vibration velocity scaled distance formula and the particle peak vibration velocity prediction method were proposed based on the results of regression analysis of single-hole blasting. The results show that the equivalent charge weight of group blast-hole simultaneous blasting is smaller than the nominal charge weight per delay, and the equivalent charge weight of simultaneous blasting can be calculated by converting through the reduction coefficient, which decreases exponentially with the increase of the blast-hole number. The superposition effect of seismic waves with different delay time can be considered by introducing vibration wave superposition factor into the modified particle peak vibration velocity scaled distance formula. The average absolute error, average relative error and root mean square error between the actual and the predicted particle peak vibration velocity values are 0.05 cm/s, 9.52% and 0.059 cm/s, respectively. It is feasible to apply the modified particle peak vibration velocity proportional distance regression analysis method to the prediction and control of blasting vibration velocity in the field.
- millisecond delay blasting,
- vibration wave superposition,
- particle peak vibration velocity,
- equivalent charge,
- regression analysis,
- scaled distance formula

FullText(HTML)

References(37)

References

[1]	何理, 钟东望, 李鹏, 等. 下穿隧道爆破荷载激励下边坡振动预测及能量分析 [J]. 爆炸与冲击, 2020, 40(7): 108–117. DOI: 10.11883/bzycj-2019-0255. HE L, ZHONG D W, LI P, et al. Vibration prediction and energy analysis of slope under blasting load in underpass tunnel [J]. Explosion and Shock Waves, 2020, 40(7): 108–117. DOI: 10.11883/bzycj-2019-0255.
[2]	武旭, 张云鹏, 郭奇峰. 台阶地形爆破振动放大与衰减效应研究 [J]. 爆炸与冲击, 2017, 37(6): 1017–1022. DOI: 10.11883/1001-1455(2017)06-1017-06. WU X, ZHANG Y P, GUO Q F. Amplification and attenuation effect of blasting vibration on step topography [J]. Explosion and Shock Waves, 2017, 37(6): 1017–1022. DOI: 10.11883/1001-1455(2017)06-1017-06.
[3]	何理, 钟冬望, 陈晨, 等. 岩质高边坡开挖施工的爆破振动监测与分析 [J]. 金属矿山, 2017(1): 6–10. DOI: 10.3969/j.issn.1001-1250.2017.01.002. HE L, ZHONG D W, CHEN C, et al. Monitoring and analysis of blasting vibration in high rocky slope excavation [J]. Metal Mine, 2017(1): 6–10. DOI: 10.3969/j.issn.1001-1250.2017.01.002.
[4]	唐海, 李海波. 反映高程放大效应的爆破振动公式研究 [J]. 岩土力学, 2011, 32(3): 820–824. DOI: 10.3969/j.issn.1000-7598.2011.03.030. TANG H, LI H B. Study of blasting vibration formula of reflecting amplification effect on elevation [J]. Rock and Soil Mechanics, 2011, 32(3): 820–824. DOI: 10.3969/j.issn.1000-7598.2011.03.030.
[5]	陈明, 卢文波, 李鹏, 等. 岩质边坡爆破振动速度的高程放大效应研究 [J]. 岩石力学与工程学报, 2011, 30(11): 2189–2195. DOI: 10.1007/s11629-011-1023-0. CHEN M, LU W B, LI P, et al. Elevation amplification effect of blasting vibration velocity in rock slope [J]. Chinese Journal of Rock Mechanics and Engineering, 2011, 30(11): 2189–2195. DOI: 10.1007/s11629-011-1023-0.
[6]	龚相超, 钟冬望, 司剑峰, 等. 高饱和黏性土中爆炸波作用下直埋钢管(空管)动态响应 [J]. 爆炸与冲击, 2020, 40(2): 13–25. DOI: 10.11883/bzycj-2018-0443. GONG X C, ZHONG D W, SI J F, et al. Dynamic responses of hollow steel pipes directly buried in high-saturated clay to blast waves [J]. Explosion and Shock Waves, 2020, 40(2): 13–25. DOI: 10.11883/bzycj-2018-0443.
[7]	QIU X Y, SHI X Z, GOU Y G, et al. Short-delay blasting with single free surface: results of experimental tests [J]. Tunnelling and Underground Space Technology, 2018, 74: 119–130. DOI: 10.1016/j.tust.2018.01.014.
[8]	CARDU M, CORAGLIOTTO D, ORESTE P. Analysis of predictor equations for determining the blast-induced vibration in rock blasting [J]. International Journal of Mining Science and Technology, 2019, 29(6): 905–915. DOI: 10.1016/j.ijmst.2019.02.009.
[9]	DOWDING C H. Blast vibration monitoring and control [M]. New Jersey: Prentice-Hall, 1985: 167−171.
[10]	杨年华. 爆破振动信号精细解读与振动控制[C]// 爆破工程技术交流论文集.北京: 中国铁道学会工程分会, 2018.
[11]	顾毅成. 对毫秒延时爆破地震公式的讨论 [J]. 铁道建筑, 2005(S1): 73–75. DOI: 10.3969/j.issn.1003-1995.2005.z1.027. GU Y C. Discussion on seismic formula concerning multistage millisecond explosion [J]. Railway Engineering, 2005(S1): 73–75. DOI: 10.3969/j.issn.1003-1995.2005.z1.027.
[12]	刘殿中. 工程爆破实用手册[M]. 北京: 地震出版社, 1981. LIU Dianzhong. Practical manual of engineering blasting [M]. Beijing: Earthquake Press, 1981.
[13]	吴绵拔. 土岩微差爆破的振动效应 [J]. 土工基础, 2005(06): 75–76. DOI: 10.3969/j.issn.1004-3152.2005.06.024. WU M B. The vibration effect of micro timelag in soil and rock [J]. Soil Engineering and Foundation, 2005(06): 75–76. DOI: 10.3969/j.issn.1004-3152.2005.06.024.
[14]	薛孔宽, 唐光荣, 曹恒安, 等. 分段微差爆破地震效应的叠加分析 [J]. 爆破, 1991, 8(3): 67–71. DOI: CNKI:SUN:BOPO.0.1991-03-019. XUE K K, TANG G R, CAO H A, et al. Superposition analysis of seismic effect of segmented millisecond blasting [J]. Blasting, 1991, 8(3): 67–71. DOI: CNKI:SUN:BOPO.0.1991-03-019.
[15]	龙源, 冯长根, 徐全军, 等. 爆破地震波在岩石介质中传播特性与数值计算研究 [J]. 工程爆破, 2000(3): 1–7. DOI: 10.3969/j.issn.1006-7051.2000.03.001. LONG Y, FENG C G, XU Q J, et al. Study on propagation characteristics of blasting seismic waves in a rock medium and numerical calculation [J]. Engineering Blasting, 2000(3): 1–7. DOI: 10.3969/j.issn.1006-7051.2000.03.001.
[16]	杨年华. 基于经验格林函数方法的爆破振动预测 [J]. 工程爆破, 2016, 22(5): 32–36. DOI: 10.3969/j.issn.1006-7051.2016.05.007. YANG N H. Prediction of blasting vibration based on empirical Green’s function method [J]. Engineering Blasting, 2016, 22(5): 32–36. DOI: 10.3969/j.issn.1006-7051.2016.05.007.
[17]	王林峰, 邓冰杰, 莫诎, 等. 基于概率论的爆破振动安全评估与控制 [J]. 振动与冲击, 2020, 39(14): 122–129. DOI: 10.13465/j.cnki.jvs.2020.14.018. WANG L F, DENG B J, MO Q, et al. Safety assessment and control of blasting vibration based on the probability theory [J]. Journal of Vibration and Shock, 2020, 39(14): 122–129. DOI: 10.13465/j.cnki.jvs.2020.14.018.
[18]	TUMENBAYAR B Y, 夏岸雄, 张建华, 等. 基于遗传算法的神经网络在爆破振动预测中的应用 [J]. 爆破, 2014, 31(3): 140–144. DOI: 10.3963/j.issn.1001-487X.2014.03.29. TUMENBAYAR B Y, XIA A X, ZHANG J H, et al. Application of neural network based on genetic algorithm in prediction of blasting vibration [J]. Blasting, 2014, 31(3): 140–144. DOI: 10.3963/j.issn.1001-487X.2014.03.29.
[19]	SHI X Z, ZHOU J. Prediction residential house’s damage effect near openpit against blasting vibration based on SVM with grid searching method/genetic algorithm [J]. Advanced Science Letters, 2012, 11(1): 238–243. DOI: 10.1166/asl.2012.2980.
[20]	施建俊, 李庆亚, 张琪, 等. 基于Matlab和BP神经网络的爆破振动预测系统 [J]. 爆炸与冲击, 2017, 37(6): 1087–1092. DOI: 10.11883/1001-1455(2017)06-1087-06. SHI J J, LI Q Y, ZHANG Q, et al. Forecast system for blasting vibration velocity peak based on Matlab and BP neural network [J]. Explosion and Shock Waves, 2017, 37(6): 1087–1092. DOI: 10.11883/1001-1455(2017)06-1087-06.
[21]	HASANIPANAH M, FARADONBEH R S, AMNIEH H B, et al. Forecasting blast-induced ground vibration developing a CART model [J]. Engineering with Computers, 2016, 33(2): 307–316. DOI: 10.1007/s00366-016-0475-9.
[22]	YUAN Q, ZHAI S H, WU L, et al. Blasting vibration velocity prediction based on least squares support vector machine with particle swarm optimization algorithm [J]. Geosystem Engineering, 2019, 22(5). DOI: 10.1080/12269328.2019.1607570.
[23]	HASANIPANAH M, NADERI R, KASHIR J, et al. Prediction of blast-produced ground vibration using particle swarm optimization [J]. Engineering with Computers, 2016, 33: 173–179. DOI: 10.1007/s00366-016-0462-1.
[24]	杨年华, 张乐. 爆破振动波叠加数值预测方法 [J]. 爆炸与冲击, 2012, 32(1): 84–90. DOI: 10.11883/1001-1455(2012)01-0084-07. YANG N H, ZHANG L. Blasting vibration waveform prediction method based on superposition principle [J]. Explosion and Shock Waves, 2012, 32(1): 84–90. DOI: 10.11883/1001-1455(2012)01-0084-07.
[25]	钟冬望, 何理, 操鹏, 等. 爆破振动持时分析及微差爆破延期时间优选 [J]. 爆炸与冲击, 2016, 36(5): 703–709. DOI: 10.11883/1001-1455(2016)05-0703-07. ZHONG D W, HE L, CAO P, et al. Analysis of blasting vibration duration and optimizing of delayed time interval for millisecond blasting [J]. Explosion and Shock Waves, 2016, 36(5): 703–709. DOI: 10.11883/1001-1455(2016)05-0703-07.
[26]	凌同华, 李夕兵, 王桂尧. 爆破震动灾害主动控制方法研究 [J]. 岩土力学, 2007(7): 1439–1442. DOI: 10.3969/j.issn.1000-7598.2007.07.029. LIN T H, LI X B, WANG G Y. A study on initiative control of blast vibration damages [J]. Rock and Soil Mechanics, 2007(7): 1439–1442. DOI: 10.3969/j.issn.1000-7598.2007.07.029.
[27]	YANG R L, LOWNDS M. Modeling the effect of delay scatter on peak particle velocity of blast vibration using a multiple seed waveform vibration model [J]. Blasting and Fragmentation, 2011, 5: 31−46. DOI: https://www.researchgate.net/publication/311923105.
[28]	BLAIR D P. Non-linear superposition models of blast vibration [J]. International Journal of Rock Mechanics and Mining Sciences, 2008, 45(2): 235–247. DOI: 10.1016/j.ijrmms.2007.05.002.
[29]	范俊余, 方秦, 张亚栋, 等. 岩石乳化炸药TNT当量系数的试验研究 [J]. 兵工学报, 2011, 32(10): 1243–1249. FAN J Y, FANG Q, ZHANG Y D, et al. Experimental investigation on the TNT equivalence coefficient of a rock emulsion explosive [J]. Acta Armamentarii, 2011, 32(10): 1243–1249.
[30]	孙永江, 江利民. 东非地区中低温敏化技术生产乳化炸药的组分与性能分析 [J]. 爆破器材, 2020(5): 42–46.
[31]	徐俊峰, 马宏昊, 沈兆武, 等. 近临界厚度乳化炸药在金属箔焊接中的应用 [J]. 火炸药学报, 2020, 43(3): 282–286, 292. DOI: 10.14077/j.issn.1007-7812.201907031. XU JF, MA H H, SHEN Z W, et al. Application of near critical thickness emulsion explosive in welding of metal foils [J]. Chinese Journal of Explosives & Propellants, 2020, 43(3): 282–286, 292. DOI: 10.14077/j.issn.1007-7812.201907031.
[32]	AGRAWAL H, MISHRA A K. Probabilistic analysis on scattering effect of initiation systems and concept of modified charge per delay for prediction of blast induced ground vibrations [J]. Measurement, 2018, 130: 306–317. DOI: 10.1016/j.measurement.2018.08.032.
[33]	杨月平. 非电起爆网路可靠性研究及其计算评价软件开发[D]. 长沙: 中南大学, 2005: 34−35. YANG Y P. Study on the reliability of nonel detonation network and software development for reliability evaluation [D]. Changsha: Central South University, 2005: 34−35.
[34]	杨志红. 微差起爆技术及其对爆破效应影响研究[D]. 武汉: 武汉大学, 2005: 50−52. YANG Z H. Study on millisecond delay blasting and its influence on blasting effect [D]. Wuhan: Wuhan University, 2005: 50−52.
[35]	SINGH P K, SIRVEIYA A K, BABUK N, et al. Evolution of effective charge weight per delay for prediction of ground vibrations generated from blasting in a limestone mine [J]. International Journal of Mining, Reclamation and Environment, 2006, 20(1): 4–19. DOI: 10.1080/13895260500286050.
[36]	AGRAWAL H, MISHRA A K. Evaluation of initiating system by measurement of seismic energy dissipation in surface blasting [J]. Arabian Journal of Geosciences, 2018, 11: 345. DOI: 10.1007/s12517-018-3683-3.
[37]	何理. 临近边坡精确延时控制爆破地震效应研究[D].武汉: 武汉科技大学, 2015. HE L. The research of blasting seismic effect controlling with precise time delay technology nearby slope [D]. Wuhan: Wuhan University of Science and Technology, 2015.