Volume 41 Issue 11
Nov.  2021
Turn off MathJax
Article Contents
LI Xiaocheng, XU Fei, YANG Leifeng, WANG Shuai, LIU Xiaochuan, XI Xulong, LIU Jijun. Study on the similarity of elasticity and ideal plasticity response of thin plate under impact loading[J]. Explosion And Shock Waves, 2021, 41(11): 113103. doi: 10.11883/bzycj-2020-0374
Citation: LI Xiaocheng, XU Fei, YANG Leifeng, WANG Shuai, LIU Xiaochuan, XI Xulong, LIU Jijun. Study on the similarity of elasticity and ideal plasticity response of thin plate under impact loading[J]. Explosion And Shock Waves, 2021, 41(11): 113103. doi: 10.11883/bzycj-2020-0374

Study on the similarity of elasticity and ideal plasticity response of thin plate under impact loading

doi: 10.11883/bzycj-2020-0374
  • Received Date: 2020-10-09
  • Rev Recd Date: 2020-04-22
  • Available Online: 2021-09-30
  • Publish Date: 2021-11-23
  • For the impact similarity problem of the scaled model and the prototype usually have different materials with elastic and plastic properties, the differences of material properties and the coexistence of elastoplastic in different deformation stages will lead to the failure of the previous impact similarity theory. Based on the theory of the thin plate impact problem, the similarity law of impact response was derived by using the method of equation similarity analysis for the material with the linear elastic and ideal rigid-plastic properties. The basic equations of the thin plate structure, such as the energy conservation equation and the strain-displacement equation, were analyzed using equation similarity analysis methods, and the similarity scaling factor of the ideal elastic-plastic thin plate structure was derived. Based on the equation similarity analysis methods, a thickness compensation method that can simultaneously consider the similarity of elastic deformation and plastic deformation was proposed. For the impact similarity problem of the scaled model and the prototype using different ideal elastoplastic materials, this method can be used to calculate the geometric sizes and load conditions of the scaled model through the material properties when the response of the scaled model is similar to that of the prototype. Two finite element models of circular plate mass impact and circular plate velocity impact were established.The geometric sizes and load conditions of the scaled model were calculated through the thickness compensation method when the prototype uses aluminum alloy and the scaled model uses different materials such as steel, brass, etc. The applicability of the thickness compensation method was verified by the response of prototype and scaled model. The results show that the structural response of the scaled model obtained by the thickness compensation method can accurately predict the impact response of the prototype, even though the scale model and the scale model use different materials.
  • loading
  • [1]
    CASABURO A, PETRONE G, FRANCO F, et al. A review of similitude methods for structural engineering [J]. Applied Mechanics Reviews, 2019, 71(3): 030802. DOI: 10.1115/1.4043787.
    [2]
    COUTINHO C P, BAPTISTA A J, RODRIGUES J D. Reduced scale models based on similitude theory: a review up to 2015 [J]. Engineering Structures, 2016, 119: 81–94. DOI: 10.1016/j.engstruct.2016.04.016.
    [3]
    JONES N. Structural impact [M]. 2nd ed. New York: Cambridge University Press, 2011.
    [4]
    ALVES M, OSHIRO R E. Scaling impacted structures when the prototype and the model are made of different materials [J]. International Journal of Solids and Structures, 2006, 43(9): 2744–2760. DOI: 10.1016/j.ijsolstr.2005.03.003.
    [5]
    秦健, 张振华. 原型和模型不同材料时加筋板冲击动态响应的相似预报方法 [J]. 爆炸与冲击, 2010, 30(5): 511–516. DOI: 10.11883/1001-1455(2010)05-0511-06.

    QIN J, ZHANG Z H. A scaling method for predicting dynamic responses of stiffened plates made of materials different from experimental models [J]. Explosion and Shock Waves, 2010, 30(5): 511–516. DOI: 10.11883/1001-1455(2010)05-0511-06.
    [6]
    MAZZARIOL L M, OSHIRO R E, ALVES M. A method to represent impacted structures using scaled models made of different materials [J]. International Journal of Impact Engineering, 2016, 90: 81–94. DOI: 10.1016/j.ijimpeng.2015.11.018.
    [7]
    SADEGHI H, DAVEY K, DARVIZEH R, et al. A scaled framework for strain rate sensitive structures subjected to high rate impact loading [J]. International Journal of Impact Engineering, 2019, 125: 229–245. DOI: 10.1016/j.ijimpeng.2018.11.008.
    [8]
    WANG S, XU F, DAI Z. Suggestion of the DLV dimensionless number system to represent the scaled behavior of structures under impact loads [J]. Archive of Applied Mechanics, 2020, 90(4): 707–719. DOI: 10.1007/s00419-019-01635-9.
    [9]
    王帅, 徐绯, 代震, 等. 结构冲击畸变问题的直接相似方法研究 [J]. 力学学报, 2020, 52(3): 774–786. DOI: 10.6052/0459-1879-19-327.

    WANG S, XU F, DAI Z, et al. A direct scaling method for the distortion problems of structural impact [J]. Chinese Journal of Theoretical and Applied Mechanics, 2020, 52(3): 774–786. DOI: 10.6052/0459-1879-19-327.
    [10]
    MAZZARIOL L M, ALVES M. Similarity laws of structures under impact load: geometric and material distortion [J]. International Journal of Mechanical Sciences, 2019, 157−158: 633–647. DOI: 10.1016/j.ijmecsci.2019.05.011.
    [11]
    WANG S, XU F, ZHANG X Y, et al. Suggestion of a framework of similarity laws for geometric distorted structures subjected to impact loading [EB/OL]. Preprint (2020-02-25) [2020-10-09]. https://www.preprints.org/manuscript/202002.0394/v1. DOI: 10.20944/preprints202002.0394.v1.
    [12]
    WU J J. Prediction of the dynamic characteristics of an elastically supported full-size flat plate from those of its complete-similitude scale model [J]. Computers & Structures, 2006, 84(3−4): 102–114. DOI: 10.1016/j.compstruc.2005.09.033.
    [13]
    COUTINHO C P, BAPTISTA A J, RODRIGES J D. Modular approach to structural similitude [J]. International Journal of Mechanical Sciences, 2018, 135: 294–312. DOI: 10.1016/j.ijmecsci.2017.11.005.
    [14]
    REDDY J N. Theory and analysis of elastic plates and shells [M]. 2nd ed. London: CRC Press, 2007.
    [15]
    张培信. 能量理论结构力学 [M]. 上海: 上海科学技术出版社, 2010.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(14)  / Tables(4)

    Article Metrics

    Article views (642) PDF downloads(114) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return