Volume 41 Issue 8
Aug.  2021
Turn off MathJax
Article Contents
KANG Yue, ZHANG Shizhong, ZHANG Yuanping, LIU Zhanli, HUANG Xiancong, MA Tian. Research on anti-shockwave performance of the protective equipment for the head of a soldier based on shock tube evaluation[J]. Explosion And Shock Waves, 2021, 41(8): 085901. doi: 10.11883/bzycj-2020-0395
Citation: KANG Yue, ZHANG Shizhong, ZHANG Yuanping, LIU Zhanli, HUANG Xiancong, MA Tian. Research on anti-shockwave performance of the protective equipment for the head of a soldier based on shock tube evaluation[J]. Explosion And Shock Waves, 2021, 41(8): 085901. doi: 10.11883/bzycj-2020-0395

Research on anti-shockwave performance of the protective equipment for the head of a soldier based on shock tube evaluation

doi: 10.11883/bzycj-2020-0395
  • Received Date: 2020-10-19
  • Rev Recd Date: 2021-01-13
  • Available Online: 2021-08-10
  • Publish Date: 2021-08-05
  • In order to optimize the structure and improve the performance of the head and face protective equipment for an individual soldier, firstly, the blast wave resistance tests of the bare-head model were carried out in real explosion field and shock tube environments, respectively. On this basis, the forward and lateral blast shockwave protective performance tests for helmet-head systems with different structures and protection levels were carried out by using the shock tube method. Finally, the peak values and durations of shockwave overpressure in the front, forehead, top, back, ear and eye areas of the helmet-head systems were compared and analyzed. The experimental results show that the blast shockwave test using a shock tube can be a substitute for the real explosion field test. When subjected to the effect of frontal shock wave, the peak value of the shockwave overpressure measured at the top measuring point of the two-half-helmet head model is about 1/6 compared with that of the nozzle outlet and 1/3 of the bare-head model as well as the integrated-helmet head model. The shockwave splits and relieves pressure at the split structure on the top of the two-half helmets and forms a superimposed reflection, resulting in a prolonged action time (5.5−8.5 ms), but a significantly decreased peak overpressure. For the rear measuring points, the peak overpressure (365 kPa) of shockwave measured by the integrated-helmet head model is slightly higher than that (303 kPa) measured by the two-half-helmet head model, and about 2.5 times as high as that (148 kPa) measured by the bare head model. By improving the structural airtightness of individual head and face protective equipments (such as wearing glasses, earmuffs or protective masks), shockwaves can be effectively prevented from entering the helmet-head systems, the stacking convergence effect can be weakened, and the protective performance of individual head and face equipments can be improved.
  • loading
  • [1]
    栗志杰, 由小川, 柳占立, 等. 爆炸冲击波作用下颅脑损伤机理的数值模拟研究 [J]. 爆炸与冲击, 2020, 40(1): 015901. DOI: 10.11883/bzycj-2018-0348.

    LI Z J, YOU X C, LIU Z L, et al. Numerical simulation of the mechanism of traumatic brain injury induced by blast shock waves [J]. Explosion and Shock Waves, 2020, 40(1): 015901. DOI: 10.11883/bzycj-2018-0348.
    [2]
    TAYLOR G I. The formation of a blast wave by a very intense explosion: I: theoretical discussion [J]. Proceedings of the Royal Society A: Mathematical, Physical, and Engineering Sciences, 1950, 201(1065): 159–174. DOI: 10.1098/rspa.1950.0049.
    [3]
    TAYLOR G I. The formation of a blast wave by a very intense explosion: II: the atomic explosion of 1945 [J]. Proceedings of the Royal Society A: Mathematical, Physical, and Engineering Sciences, 1950, 201(1065): 175–186. DOI: 10.1098/rspa.1950.0050.
    [4]
    IGRA O, WU X, FALCOVITZ J, et al. Experimental and theoretical study of shock wave propagation through double-bend ducts [J]. Journal of Fluid Mechanics, 2001, 437: 255–282. DOI: 10.1017/S0022112001004098.
    [5]
    BRODE H L. Blast wave from a spherical charge [J]. The Physics of Fluids, 1959, 2(2): 217–229. DOI: 10.1063/1.1705911.
    [6]
    HENRYCH J. The dynamics of explosion and its use [J]. Journal of Applied Mechanics, 1980, 47(1): 218. DOI: 10.1115/1.3153619.
    [7]
    SCOTT T E, KIRKMAN E, HAQUE M, et al. Primary blast lung injury: a review [J]. British Journal of Anaesthesia, 2017, 118(3): 311–316. DOI: 10.1093/bja/aew385.
    [8]
    LOCKHART P A, CRONIN D S. Helmet liner evaluation to mitigate head response from primary blast exposure [J]. Computer Methods in Biomechanics and Biomedical Engineering, 2015, 18(6): 635–645. DOI: 10.1080/10255842.2013.829460.
    [9]
    DEPALMA R G, BURRIS D G, CHAMPION H R, et al. Blast injuries [J]. The New England Journal of Medicine, 2005, 352(13): 1335–1342. DOI: 10.1056/NEJMra042083.
    [10]
    MOORE D F, RADOVITZKY R A, SHUPENKO L, et al. Blast physics and central nervous system injury [J]. Future Neurology, 2008, 3(3): 243–250. DOI: 10.2217/14796708.3.3.243.
    [11]
    VERSACE J. A review of the severity index [C]// Proceedings of the 15th Stapp Car Crash Conference. San Diego: Society of Automotive Engineers, 1971: 771−796. DOI: 10.4271/710881.
    [12]
    SHARMA S, MAKWANA R, ZHANG L Y. Evaluation of blast mitigation capability of advanced combat helmet by finite element modeling [C]// 12th International LS-DYNA® Users Conference. 2012: 1−12.
    [13]
    ZHANG L Y, MAKWANA R, SHARMA S. Brain response to primary blast wave using validated finite element models of human head and advanced combat helmet [J]. Frontiers in Neurology, 2013, 4: 88. DOI: 10.3389/fneur.2013.00088.
    [14]
    TAN L B, CHEW F S, TSE K M, et al. Impact of complex blast waves on the human head: a computational study [J]. International Journal for Numerical Methods in Biomedical Engineering, 2014, 30(12): 1476–1505. DOI: 10.1002/cnm.2668.
    [15]
    MOSS W C, KING M J, BLACKMAN E G. Skull flexure from blast waves: a mechanism for brain injury with implications for helmet design [J]. Physical Review Letters, 2009, 103(10): 108702. DOI: 10.1103/PhysRevLett.103.108702.
    [16]
    GRUJICIC M, BELL W C, PANDURANGAN B, et al. Fluid/structure interaction computational investigation of blast-wave mitigation efficacy of the advanced combat helmet [J]. Journal of Materials Engineering and Performance, 2011, 20(6): 877–893. DOI: 10.1007/s11665-010-9724-z.
    [17]
    EYNDE J O, YU A W, ECKERSLEY C P, et al. Primary blast wave protection in combat helmet design: a historical comparison between present day and World War I [J]. PLoS One, 2020, 15(2): e0228802. DOI: 10.1371/journal.pone.0228802.
    [18]
    GRUJICIC M, RAMASWAMI S, SNIPES J S, et al. Potential improvement in helmet blast-protection via the use of a polyurea external coating: combined experimental/computational analyses [J]. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2020, 234(3): 337–367. DOI: 10.1177/1464420716644472.
    [19]
    SONE J Y, KONDZIOLKA D, HUANG J H, et al. Helmet efficacy against concussion and traumatic brain injury: a review [J]. Journal of Neurosurgery, 2017, 126(3): 768–781. DOI: 10.3171/2016.2.JNS151972.
    [20]
    BRADFIELD C, VAVALLE N, De VINCENTIS B, et al. Combat helmet suspension system stiffness influences linear head acceleration and white matter tissue strains: implications for future helmet design [J]. Military Medicine, 2018, 183(S1): 276–286. DOI: 10.1093/milmed/usx181.
    [21]
    RODRÍGUEZ-MILLÁN M, TAN L B, TSE K M, et al. Effect of full helmet systems on human head responses under blast loading [J]. Materials and Design, 2017, 117: 58–71. DOI: 10.1016/j.matdes.2016.12.081.
    [22]
    TSE K M, TAN L B, SAPINGI M A B, et al. The role of a composite polycarbonate-aerogel face shield in protecting the human brain from blast-induced injury: a fluid-structure interaction (FSI) study [J]. Journal of Sandwich Structures and Materials, 2019, 21(7): 2484–2511. DOI: 10.1177/1099636217733369.
    [23]
    TAN L B, TSE K M, TAN Y H, et al. Face shield design against blast-induced head injuries [J]. International Journal for Numerical Methods in Biomedical Engineering, 2017, 33(12): e2884. DOI: 10.1002/cnm.2884.
    [24]
    韩惠霖. 激波管的发展和应用 [J]. 浙江大学学报, 1980(3): 170–188.

    HAN H L. Development and application of shock tubes [J]. Journal of Chekiang University, 1980(3): 170–188.
    [25]
    王正国, 孙立英, 杨志焕, 等. 系列生物激波管的研制与应用 [J]. 爆炸与冲击, 1993, 13(1): 77–83.

    WANG Z G, SUN L Y, YANG Z H, et al. The design production and application of a series of bio-shock tubes [J]. Explosion and Shock Waves, 1993, 13(1): 77–83.
    [26]
    王海峰. 脊髓冲击伤动物模型的建立及凋亡相关基因表达的初步研究[D]. 合肥: 安徽医科大学, 2010.
    [27]
    GANPULE S, GU L, ALAI A, et al. Role of helmet in the mechanics of shock wave propagation under blast loading conditions [J]. Computer Methods in Biomechanics and Biomedical Engineering, 2012, 15(11): 1233–1244. DOI: 10.1080/10255842.2011.597353.
    [28]
    COURTNEY E, COURTNEY A, COURTNEY M. Shock tube design for high intensity blast waves for laboratory testing of armor and combat materiel [J]. Defence Technology, 2014, 10(2): 245–250. DOI: 10.1016/j.dt.2014.04.003.
    [29]
    LI J T, MA T, HUANG C, et al. Protective mechanism of helmet under far-field shock wave [J]. International Journal of Impact Engineering, 2020, 143: 103617. DOI: 10.1016/j.ijimpeng.2020.103617.
    [30]
    杨亚东, 李向东, 王晓鸣. 爆炸冲击波空中传播特征参量的优化拟合 [J]. 爆破器材, 2014, 43(1): 13–18. DOI: 10.3969/j.issn.1001-8352.2014.01.003.

    YANG Y D, LI X D, WANG X M. Optimum fitting for characteristic parameters of blast shockwaves traveling in air [J]. Explosive Materials, 2014, 43(1): 13–18. DOI: 10.3969/j.issn.1001-8352.2014.01.003.
    [31]
    SKOTAK M, ALAY E, ZHENG J Q. Effective testing of personal protective equipment in blast loading conditions in shock tube: comparison of three different testing locations [J]. PLoS One, 2018, 13(6): e0198968. DOI: 10.1371/journal.pone.0198968.
    [32]
    MAACH S, ROSEN B, MCCAULEY L, et al. Comparison of Hybrid III head response to shock tube and explosive blast loading [C]// International Research Conference on Biomechanics of Injury (IRCOBI). Antwerp: IRCOBI, 2017: 274−283.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(15)

    Article Metrics

    Article views (984) PDF downloads(192) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return