Research advances in circumferential multiple linear explosively-formed projectile technology

JIANG Jianwei; PENG Jiacheng

doi:10.11883/bzycj-2021-0017

Volume 41 Issue 10

Oct. 2021

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2021 > 41(10): 101102

YAN Fuhuai, YUE Songlin, QIU Yanyu, WANG Mingyang, HE Yong. Calculation of shock wave transmission and reflection pressures at water-soil interface[J]. Explosion And Shock Waves, 2024, 44(11): 112201. doi: 10.11883/bzycj-2023-0440

Citation:

JIANG Jianwei, PENG Jiacheng. Research advances in circumferential multiple linear explosively-formed projectile technology[J]. Explosion And Shock Waves, 2021, 41(10): 101102. doi: 10.11883/bzycj-2021-0017

Citation:

PDF( 4708 KB)

Research advances in circumferential multiple linear explosively-formed projectile technology

doi: 10.11883/bzycj-2021-0017

School of Mechatronical Engineering, Beijing Institute of Technology, Beijing 100081, China

Received Date: 2021-01-13
Rev Recd Date: 2021-04-20

Available Online: 2021-09-17

Publish Date: 2021-10-13

Abstract

Abstract

The traditional fragmental warhead used in air defense and antimissile can not effectively destroy the incoming insensitive ammunition due to the weak fragmentations, which limits its development. After explosion of the circumferential multiple linear explosively-formed projectile (MLEFP) warhead, a number of folded linear explosively formed projectiles (LEFP) are produced in the circumferential direction with high speed, large mass and large length to diameter ratio. These projectiles can penetrate thick cases and ignite insensitive ammunitions, so the MLEFP warhead has a great application prospect in the medium-short range air defense and anti-missile system. Based on the development of linear projectile and the forming method of new LEFPs, the influences of charge and liner are focused on. Theories, merits and demerits of three initial velocity models are compared. The results of penetration tests using folded LEFPs in recent years are summarized. Finally, the future development direction of circumferential MLEFP warhead and linear projectile is analyzed.
- circumferential multiple linear explosively formed projectile warhead,
- linear projectile,
- charge,
- liner,
- initial velocity model,
- penetrating performance

FullText(HTML)

References(47)

References

[1]	ROSLUND L A. Initiation of warhead fragments I: Normal impacts: NOLTR 73-124 [R]. White Oak, MD: Naval Surface Weapons Center, 1973.
[2]	HELD M. Initiation criteria of high explosives at different projectile or jet densities [J]. Propellants, Explosives, Pyrotechnics, 1996, 21(5): 235–237. DOI: 10.1002/prep.19960210505.
[3]	童宗保, 王金相, 彭楚才, 等. 预制破片对屏蔽炸药冲击引爆研究 [J]. 科学技术与工程, 2014, 14(7): 173–177. DOI: 10.3969/j.issn.1671-1815.2014.07.038. TONG Z B, WANG J X, PENG C C, et al. Study on the initiation of shielded explosive impacted by prefabricated fragment [J]. Science Technology and Engineering, 2014, 14(7): 173–177. DOI: 10.3969/j.issn.1671-1815.2014.07.038.
[4]	魏继锋, 魏锦, 王树山. 离散杆战斗部技术研究 [J]. 战术导弹技术, 2015(2): 101–105. DOI: 10.16358/j.issn.1009-1300.2015.02.18. WEI J F, WEI J, WANG S S. Research on technology of discrete rod warhead [J]. Tactical Missile Technology, 2015(2): 101–105. DOI: 10.16358/j.issn.1009-1300.2015.02.18.
[5]	CEDER R, LEUS V, DAVID I. Exploring the v²d initiation criterion within the Lee-Tarver model [C]// Proceedings of the 30th International Symposium on Ballistics. Long Beach, 2017: 1887−1896. DOI: 10.12783/ballistics2017/16966.
[6]	苗润源, 梁争峰. 防空反导用多爆炸成型弹丸技术现状与发展 [J]. 飞航导弹, 2017(7): 89–93. DOI: 10.16338/j.issn.1009-1319.2017.07.19. MIAO R Y, LIANG Z F. Current situation and development of multiple explosive shaped projectile technology for air defense and antimissile [J]. Aerodynamic Missile Journal, 2017(7): 89–93. DOI: 10.16338/j.issn.1009-1319.2017.07.19.
[7]	奥尔连科. 爆炸物理学[M]. 孙承纬, 译. 北京: 科学出版社, 2011
[8]	AHMED M, MALIK A Q. A review of works on shaped charges [J]. Engineering, Technology and Applied Science Research, 2017, 7(5): 2098–2103. DOI: 10.48084/etasr.1532.
[9]	WEIMANN K. Research and development in the area of explosively formed projectiles charge technology [J]. Propellants, Explosives, Pyrotechnics, 1993, 18(5): 294–298. DOI: 10.1002/prep.19930180511.
[10]	松全才, 金韶华, 李文. 俄罗斯切割索的现状 [J]. 爆炸与冲击, 1997, 17(4): 382–388. SONG Q C, JIN S H, LI W. Manufacture of cutting explosives in Russia [J]. Explosion and Shock Waves, 1997, 17(4): 382–388.
[11]	HAYES G A. Linear shaped-charge (LSC) collapse model [J]. Journal of Materials Science, 1984, 19(9): 3049–3058. DOI: 10.1007/BF01026984.
[12]	SEOKBIN L, PAUL W. An investigation of the characteristics of linear shaped charges used in demolition [C]// Proceedings of the 29th Annual Conference on Explosives and Blasting Technique, 2003: 297−306.
[13]	CHASE J B, KUKLO R M, SHAW L L, et al. High resolution diagnostics of a linear shaped charge jet [C]// 18th International Symposium and Exhibition on Ballistics. San Antonio: Lawrence Livermore National Lab, 1999, 1: 442–448.
[14]	曾新吾, 薛鸿陆. 线型聚能装药的理论研究 [J]. 爆炸与冲击, 1988, 8(2): 97–105. ZENG X W, XUE H L. A theoretical study on linear shaped charge [J]. Explosion and Shock Waves, 1988, 8(2): 97–105.
[15]	李彬峰, 潘国斌. 聚能罩壁厚对切割深度的影响 [J]. 爆破器材, 1999, 28(6): 16–19. DOI: 10.3969/j.issn.1001-8352.1999.06.005. LI B F, PAN G B. A study of the influence of wall thickness of shaped charge liner on the depth of cutting [J]. Explosive Materials, 1999, 28(6): 16–19. DOI: 10.3969/j.issn.1001-8352.1999.06.005.
[16]	祝逢春, 邓振礼, 胡瑜. 线性聚能装药切割航空炸弹可靠性评估 [J]. 火工品, 2000, 11(2): 24–26. DOI: 10.3969/j.issn.1003-1480.2000.02.007. ZHU F C, DENG Z L, HU Y. Reliability assessment on cutting aerial bombs using linear shaped charge [J]. Initiators and Pyrotechnics, 2000, 11(2): 24–26. DOI: 10.3969/j.issn.1003-1480.2000.02.007.
[17]	苟瑞君, 赵国志, 杜忠华, 等. 线性成型装药的威力研究 [J]. 爆破器材, 2005, 34(5): 25–28. DOI: 10.3969/j.issn.1001-8352.2005.05.009. GOU R J, ZHAO G Z, DU Z H, et al. Study on the power of linear shaped charge [J]. Explosive Materials, 2005, 34(5): 25–28. DOI: 10.3969/j.issn.1001-8352.2005.05.009.
[18]	苟瑞君, 赵国志. 线性成型装药起爆方式的比较 [J]. 火工品, 2006(1): 42–45. DOI: 10.3969/j.issn.1003-1480.2006.01.013. GOU R J, ZHAO G Z. Comparison of linear shaped charge initiation manners [J]. Initiators and Pyrotechnics, 2006(1): 42–45. DOI: 10.3969/j.issn.1003-1480.2006.01.013.
[19]	陶钢, 朱鹤荣, 石连捷, 等. 爆炸成型弹丸药型罩结构分析 [J]. 弹道学报, 1995, 7(3): 84–86,93. TAO G, ZHU H R, SHI L J, et al. On the analysis of the shape for the EFP’s liner [J]. Journal of Ballistics, 1995, 7(3): 84–86,93.
[20]	苟瑞君. 线性爆炸成型侵彻体形成机理研究[D]. 南京: 南京理工大学, 2006 GOU R J. Forming mechanism of linear explosively formed penetrator [D]. Nanjing: Nanjing University of Science and Technology, 2006.
[21]	杜忠华, 段卫毅. 起爆方式对LEFP成型及侵彻影响的数值模拟研究 [J]. 南京理工大学学报(自然科学版), 2009, 33(6): 756–759. DOI: 10.3969/j.issn.1005-9830.2009.06.009. DU Z H, DUAN W Y. Numerical simulation on formation and penetration effect of LEFP by blast ways [J]. Journal of Nanjing University of Science and Technology (Natural Science), 2009, 33(6): 756–759. DOI: 10.3969/j.issn.1005-9830.2009.06.009.
[22]	段卫毅. 线性爆炸成型侵彻体成型机理与侵彻研究[D]. 南京: 南京理工大学, 2009 DUAN W Y. Study on the formation mechanism and penetration of linear explosively formed penetrators [D]. Nanjing: Nanjing University of Science and Technology, 2009.
[23]	高接东. 基于变壁厚药型罩的LEFP成型机理研究[D]. 南京: 南京理工大学, 2013 GAO J D. Study on LEFP forming mechanism based on variable wall thickness liner [D]. Nanjing: Nanjing University of Science and Technology, 2013.
[24]	JOO J, CHOI J, KOO M, et al. Numerical analysis of penetration reduction of a long rod penetrator impacted by a linear explosively formed penetrator [C]// Proceedings of the 30th International Symposium on Ballistics. Long Beach: Destech, 2017: 1887−1896.
[25]	JOO J, CHOI J, KOO M, et al. Numerical analysis on penetration reduction of a WHA penetrator by an impact of linear explosively formed penetrator (LEFP) [J]. Journal of the Korea Institute of Military Science and Technology, 2017, 20(3): 384–392.
[26]	LI Y S, HUANG Z H, SHI A S, et al. Deformation and fracture failure of a high-speed long rod intercepted by linear explosively formed penetrators sequence [J]. Materials, 2020, 13(22): 5086. DOI: 10.3390/ma13225086.
[27]	周涛, 王康康, 杜忠华, 等. 起爆方式对线性成型装药爆炸威力的影响 [J]. 火炸药学报, 2014, 37(2): 37–42. DOI: 10.3969/j.issn.1007-7812.2014.02.008. ZHOU T, WANG K K, DU Z H, et al. Effect of initiation way on the blasting power of linear shaped charge [J]. Chinese Journal of Explosives and Propellants, 2014, 37(2): 37–42. DOI: 10.3969/j.issn.1007-7812.2014.02.008.
[28]	刘杰, 杜忠华, 王锋, 等. 基于爆轰波碰撞形成LEFP的研究 [J]. 工程力学, 2014, 31(8): 235–242. DOI: 10.6052/j.issn.1000-4750.2013.03.0198. LIU J, DU Z H, WANG F, et al. Linear explosively-formed penetrators based on detonation wave collision [J]. Engineering Mechanics, 2014, 31(8): 235–242. DOI: 10.6052/j.issn.1000-4750.2013.03.0198.
[29]	王锋. 基于爆轰波对撞原理的新型EFP研究[D]. 南京: 南京理工大学, 2012 WANG F. Research on new EFP based on detonation wave collision principle [D]. Nanjing: Nanjing University of Science and Technology, 2012
[30]	CAO Y W, SUN X Y, YUAN B H, et al. Study on design and performance of linear EFP warhead [C]// Proceedings of the 28th International Symposium on Ballistics. Atlanta Georgia: DEStech Publishing, 2014: 173−178.
[31]	张明丛. 周向MLEFP成型机理研究[D]. 南京: 南京理工大学, 2015 ZHANG M C. Study on forming mechanism of circumferential MLEFP [D]. Nanjing: Nanjing University of Science and Technology, 2015.
[32]	张明丛, 杜忠华, 周涛, 等. 药型罩结构参数对周向多线性爆炸成型弹丸成型及侵彻能力的影响 [J]. 火炸药学报, 2016, 39(1): 60–65,69. DOI: 10.14077/j.issn.1007-7812.2016.01.011. ZHANG M C, DU Z H, ZHOU T, et al. Influence of liner structural parameters on formation and penetration of the circumferential multiple linear explosive formation penetration [J]. Chinese Journal of Explosives and Propellants, 2016, 39(1): 60–65,69. DOI: 10.14077/j.issn.1007-7812.2016.01.011.
[33]	王康康. 基于线性装药的大威力EFP研究[D]. 南京: 南京理工大学, 2015 WANG K K. Research on EFP based on linear charge [D]. Nanjing: Nanjing University of Science and Technology, 2015.
[34]	李鹏, 袁宝慧, 李刚, 等. 一种杆式周向多爆炸成型弹丸战斗部仿真及实验研究 [J]. 南京理工大学学报, 2017, 41(6): 681–685. DOI: 10.14177/j.cnki.32-1397n.2017.41.06.003. LI P, YUAN B H, LI G, et al. Simulation and experimental study on warhead of rod-shaped circumferential multiple explosively formed penetrator [J]. Journal of Nanjing University of Science and Technology, 2017, 41(6): 681–685. DOI: 10.14177/j.cnki.32-1397n.2017.41.06.003.
[35]	李鹏, 袁宝慧. 爆炸成型杆式弹丸战斗部技术研究[C]// 第15届全国战斗部与毁伤技术学术交流会论文集. 北京, 2017, 11: 305-307 LI P, YUAN B H. Research on the warhead numerical simulation of a rod type circumferential multiple explosively formed projectile [C]// Proceedings of the 15th National Symposium on Warhead and Damage Technology. Beijing, 2017, 11: 305−307.
[36]	威廉·普·沃尔特斯, 乔纳斯·埃·朱卡斯. 成型装药原理及其应用[M]. 王树魁, 贝静芬, 译. 北京: 兵器工业出版社, 1992. WALTERS, ZUKAS. Fundamentals of shaped charges [M]. WANG S K, BEI J F, trans. Beijing: Weapons Industry Press, 1992.
[37]	王树山. 终点效应学[M]. 北京: 科学出版社, 2019. WANG S S. Terminal effects [M]. Beijing: Science Press, 2019.
[38]	张守中. 爆炸与冲击动力学[M]. 北京: 兵器工业出版社, 1993.
[39]	苗润源, 李有仓, 梁争峰. 药型罩曲率半径对周向线性多爆炸成型弹丸成型性能及毁伤效应的影响 [J]. 科学技术与工程, 2017, 17(31): 235–238. DOI: 10.3969/j.issn.1671-1815.2017.31.038. MIAO R Y, LI Y C, LIANG Z F. Liner radius’ influence on circumferential linear multiple explosively formed projectiles' forming performance and damage effects [J]. Science Technology and Engineering, 2017, 17(31): 235–238. DOI: 10.3969/j.issn.1671-1815.2017.31.038.
[40]	苗润源, 梁争峰, 程淑杰. 速度梯度对周向MLEFP的成型性能影响分析[C]// 第十六届战斗部与毁伤技术学术交流会论文集. 昆明, 2019: 276−278. MIAO R Y, LIANG Z F, CHENG S J. Analysis of the influence of velocity gradient on the forming performance of circumferential MLEFP [C]// Proceedings of the 16th Academic Conference on Warhead and Damage Technology. Kunming, 2019: 276−278.
[41]	陈曦, 刘杰, 杜忠华, 等. 两端起爆下曲率药型罩线性装药的成型特性 [J]. 火炸药学报, 2018, 41(5): 441–446. DOI: 10.14077/j.issn.1007-7812.2018.05.003. CHEN X, LIU J, DU Z H, et al. Forming characteristics of linear charge with curved liner under two-end initiation [J]. Chinese Journal of Explosives and Propellants, 2018, 41(5): 441–446. DOI: 10.14077/j.issn.1007-7812.2018.05.003.
[42]	李鹏, 袁宝慧, 李刚, 等. 一种杆式周向多爆炸成型弹丸战斗部数值模拟研究 [J]. 弹箭与制导学报, 2017, 37(1): 69–72. DOI: 10.15892/j.cnki.djzdxb.2017.01.016. LI P, YUAN B H, LI G, et al. Research on the warhead numerical simulation of a rod type circumferential multiple explosively formed projectile [J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2017, 37(1): 69–72. DOI: 10.15892/j.cnki.djzdxb.2017.01.016.
[43]	李鹏, 李刚, 袁宝慧, 等. 一种杆式多爆炸成型侵彻体战斗部 [J]. 爆炸与冲击, 2018, 38(4): 883–890. DOI: 10.11883/bzycj-2016-0356. LI P, LI G, YUAN B H, et al. A rod-shaped explosively formed penetrator warhead [J]. Explosion and Shock Waves, 2018, 38(4): 883–890. DOI: 10.11883/bzycj-2016-0356.
[44]	李鹏, 袁宝慧, 丁刚, 等. LEFP战斗部毁伤元成型及初速分析研究 [J]. 科学技术与工程, 2017, 17(10): 188–191. DOI: 10.3969/j.issn.1671-1815.2017.10.032. LI P, YUAN B H, DING G, et al. The study of linear explosively formed penetrators warhead kill element on forming and initial velocity [J]. Science Technology and Engineering, 2017, 17(10): 188–191. DOI: 10.3969/j.issn.1671-1815.2017.10.032.
[45]	史云鹏, 袁宝慧, 梁争峰, 等. 线形EFP药型罩设计 [J]. 火炸药学报, 2007, 30(3): 37–40,44. DOI: 10.3969/j.issn.1007-7812.2007.03.010. SHI Y P, YUAN B H, LIANG Z F, et al. The design of linear EFP liner [J]. Chinese Journal of Explosives & Propellants, 2007, 30(3): 37–40,44. DOI: 10.3969/j.issn.1007-7812.2007.03.010.
[46]	李鹏, 李刚, 袁宝慧, 等. 旋转对爆炸成型杆式侵彻体毁伤威力的影响 [J]. 爆炸与冲击, 2018, 38(3): 616–621. DOI: 10.11883/bzycj-2016-0263. LI P, LI G, YUAN B H, et al. Influence of rotation on damage power of an explosively-formed rod-like penetrator [J]. Explosion and Shock Waves, 2018, 38(3): 616–621. DOI: 10.11883/bzycj-2016-0263.
[47]	李鹏, 袁宝慧, 李刚, 等. 新型多线形爆炸成型弹丸战斗部的弹丸成型及毁伤研究 [J]. 火炸药学报, 2017, 40(1): 65–68;80. DOI: 10.14077/j.issn.1007-7812.2017.01.013. LI P, YUAN B H, LI G, et al. Study on the formation of penetrators and damage of a new type of multiple linear explosively formed penetrator warhead [J]. Chinese Journal of Explosives and Propellants, 2017, 40(1): 65–68;80. DOI: 10.14077/j.issn.1007-7812.2017.01.013.

Relative Articles

[1]	GAO Jiancun, YANG Xigang, WANG Le, HONG Zijin, HU Shoutao, LI Ruxia, SUN Xu. On the mechanism of magnetic field effect on methane explosion[J]. Explosion And Shock Waves, 2023, 43(1): 012101. doi: 10.11883/bzycj-2022-0259
[2]	GAO Jiancun, YANG Xigang, HU Shoutao, HONG Zijin, WANG Le, LI Ruxia, XIA Yimeng, SUN Xu. Effect of external magnetic field on explosion reaction of acetylene gas[J]. Explosion And Shock Waves, 2022, 42(7): 075401. doi: 10.11883/bzycj-2021-0417
[3]	SHU Junxiang, PEI Hongbo, HUANG Wenbin, ZHANG Xu, ZHENG Xianxu. Accurate measurements of detonation pressure and detonation reaction zones of several commonly-used explosives[J]. Explosion And Shock Waves, 2022, 42(5): 052301. doi: 10.11883/bzycj-2021-0305
[4]	LIU Hai, LI Yi, LI Junling, MA Zhaoxia, CHEN Hong. Simulations of shock initiation of CL-20/HMX co-crystal[J]. Explosion And Shock Waves, 2020, 40(3): 032102. doi: 10.11883/bzycj-2019-0011
[5]	FENG Song, RAO Guoning, PENG Jinhua, WANG Bin. Experimental study of bubble pulsation by underwater explosion of CL-20-based explosives[J]. Explosion And Shock Waves, 2018, 38(4): 855-862. doi: 10.11883/bzycj-2017-0093
[6]	Hu Hongwei, Yan Jiajia, Chen Lang, Guo Wei, Song Pu. Effect of aluminum powder content and its particle size on reaction characteristics for underwater explosion of CL-20-based explosives containing aluminum[J]. Explosion And Shock Waves, 2017, 37(1): 157-161. doi: 10.11883/1001-1455(2017)01-0157-05
[7]	Pi Zhengdi, Chen Lang, Liu Danyang, Wu Junying. Shock initiation of CL-20 based explosives[J]. Explosion And Shock Waves, 2017, 37(6): 915-923. doi: 10.11883/1001-1455(2017)06-0915-09
[8]	Liu Danyang, Chen Lang, Wang Chen, Zhang Liansheng. Detonation wave structure of CL-20 composite explosive[J]. Explosion And Shock Waves, 2016, 36(4): 568-572. doi: 10.11883/1001-1455(2016)04-0568-05
[9]	Zhong Wei, Tian Zhou, Zhao Yang. Calculation of the quasi-static temperature of confined explosions in consideration of the effect of the chemical reactions with detonation products[J]. Explosion And Shock Waves, 2015, 35(6): 777-784. doi: 10.11883/1001-1455(2015)06-0777-08
[10]	Ma Xin, Chen Lang, Lu Feng, Wu Jun-ying. Calculation on multi-step thermal decomposition of HMX-and TATB-based composite explosive under cook-off conditions[J]. Explosion And Shock Waves, 2014, 34(1): 67-74. doi: 10.11883/1001-1455(2014)01-0067-08
[11]	Ji Long, Huang Zheng-xiang, Gu Xiao-hui. Motion features of flying plates of double-layer wedged explosive reactive armor[J]. Explosion And Shock Waves, 2013, 33(4): 387-393. doi: 10.11883/1001-1455(2013)04-0387-07
[12]	Zhong Wei, Tian Zhou. Calculation of quasi-static pressures for confined explosions considering chemical reactions under isobaric assumption[J]. Explosion And Shock Waves, 2013, 33(4): 375-380. doi: 10.11883/1001-1455(2013)04-0375-06
[13]	GAO Hong-quan, LU Fang-yun, WANG Shao-long, YAN Peng, LUO Yong-feng, YUAN Wei, HU Jian. Adamage-powerevaluationmethodoftheexplosive-involveddevice inaconfinedcontainerstoringliquid[J]. Explosion And Shock Waves, 2011, 31(3): 306-310. doi: 10.11883/1001-1455(2011)03-0306-05
[14]	TIAN Zhan-dong, ZHANG Zhen-yu, LU Fang-yun, ZHAOJian-heng. Modelingandsimulationoflaser-inducedignition usingdetailedchemicalkinetics[J]. Explosion And Shock Waves, 2011, 31(3): 285-289. doi: 10.11883/1001-1455(2011)03-0285-05
[15]	ZHANG Xian-Feng, ZHAO Xiao-Ning, QIAO Liang. Theory analysis on shock-induced chemical reaction of reactive metal[J]. Explosion And Shock Waves, 2010, 30(2): 145-151. doi: 10.11883/1001-1455(2010)02-0145-07
[16]	WANG Bao-guo, CHEN Ya-fang, ZHANG Jing-lin, GAO Min. Preparation, characterization and performances of submicron -CL-20[J]. Explosion And Shock Waves, 2009, 29(5): 550-554. doi: 10.11883/1001-1455(2009)05-0550-05
[17]	LIANG Zeng-you, HUANG Feng-lei, ZHANG Zhen-yu. Study on new reaction rate function model of PBX-9404 for damaged explosive initiation behaviour[J]. Explosion And Shock Waves, 2008, 28(1): 38-41. doi: 1.011883/1001-1455(2008)01-0038-06
[18]	KAN Jin-ling, LIU Jia-cong. The blast characteristic of SEFAEEffect of after-burning on blast power[J]. Explosion And Shock Waves, 2006, 26(5): 404-409. doi: 10.11883/1001-1455(2006)05-0404-06
[19]	JIN Peng-gang, CHANG Hai, CHEN Zhi-qun. Studies on kinetics and mechanisms of thermal decomposition of 1,1-diamino-2,2-dinitroethylene (FOX-7)[J]. Explosion And Shock Waves, 2006, 26(6): 528-531. doi: 10.11883/1001-1455(2006)06-0528-04
[20]	SHEN Li-jin, WANG Xu-guang, SONG Jin-quan. Study on reaction dynamics of non-explosive and irrestorable fertilizer-grade ammonium nitrate during the thermal decomposition[J]. Explosion And Shock Waves, 2005, 25(3): 232-238. doi: 10.11883/1001-1455(2005)03-0232-07