Investigation of combustion characteristics of a new aluminum-containing propellant based on optical diagnosis

YANG Yunjie; XING Shiyue; ZHANG Shaohua; YU Xilong; WANG Zezhong; WANG Haiyan

doi:10.11883/bzycj-2022-0316

Volume 43 Issue 4

Apr. 2023

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2023 > 43(4): 042301

YANG Yunjie, XING Shiyue, ZHANG Shaohua, YU Xilong, WANG Zezhong, WANG Haiyan. Investigation of combustion characteristics of a new aluminum-containing propellant based on optical diagnosis[J]. Explosion And Shock Waves, 2023, 43(4): 042301. doi: 10.11883/bzycj-2022-0316

Citation:

YANG Yunjie, XING Shiyue, ZHANG Shaohua, YU Xilong, WANG Zezhong, WANG Haiyan. Investigation of combustion characteristics of a new aluminum-containing propellant based on optical diagnosis[J]. Explosion And Shock Waves, 2023, 43(4): 042301. doi: 10.11883/bzycj-2022-0316

Citation:

YANG Yunjie, XING Shiyue, ZHANG Shaohua, YU Xilong, WANG Zezhong, WANG Haiyan. Investigation of combustion characteristics of a new aluminum-containing propellant based on optical diagnosis[J]. Explosion And Shock Waves, 2023, 43(4): 042301. doi: 10.11883/bzycj-2022-0316

PDF( 4159 KB)

Investigation of combustion characteristics of a new aluminum-containing propellant based on optical diagnosis

doi: 10.11883/bzycj-2022-0316

YANG Yunjie^{1, 2
,},
XING Shiyue^{1, 2},
ZHANG Shaohua^{2
,
,},
YU Xilong²,
WANG Zezhong²,
WANG Haiyan¹

1.
China University of Mining and Technology (Beijing), Beijing 100083, China
2.
Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China

Received Date: 2022-07-21
Rev Recd Date: 2023-02-07

Available Online: 2023-02-23

Publish Date: 2023-04-05

Abstract

Abstract

In order to investigate the combustion characteristics of a new aluminum-containing solid propellant, the ignition and combustion process of the propellant at elevated pressure for simulating the solid propellant rocket engine were systematically studied by using a variable power fiber-laser and optical diagnostic techniques. The near-infrared fiber laser was employed to ignite the propellant slices placed in a high-pressure optical tank which was designed and manufactured for simulating solid propellant rocket engine conditions. The successive images of the laser-ignition and combustion process were captured by a high-speed camera while the optical emission spectroscopy was recorded with fiber-based spectrometers. Therewith, the regression rate, the ignition delay, and agglomerate particle size of the propellant were determined from the quantitative measurement and analysis of the former, likewise, the combustion temperatures were deduced by the latter. Accordingly, the maximum combustion temperature, the magnitude of the ignition delay, and rules of regression rate were mastered, as well as their dependence on laser power and ambient pressure. Firstly, the analysis of emission spectra shows that the maximum combustion temperature of this propellant should be higher than 3 300 K which grows with pressure. It reveals that the fundamental mechanisms of the propellant receding rate and ignition delay are affected by the ambient pressure from the perspective of chemical reaction dynamics. Meantime, the exponential decay law of ignition delay is determined while its formation mechanism is explored, based on the real-time monitoring of the propellant burning surface with high spatial and temporal resolution. Furthermore, it is also found that the regression rate of this propellant increases rapidly at low pressure, but appears to be saturated gradually when the ambient pressure exceeds 4 MPa. Whereafter, it is confirmed that the receding rate rules strictly follow the Summerfield burning rate equation. Finally, through the quantitative analysis of the luminous area of agglomerates in the combustion process, the effects of the agglomerate particle size in the propellant product by environmental parameters are concluded.
- solid propellant,
- aluminum,
- laser ignition,
- combustion characteristics,
- optical diagnosis

FullText(HTML)

References(23)

References

[1]	《固体火箭技术》编辑部. 2021年固体推进动力领域发展综述 [J]. 固体火箭技术, 2022, 45(2): 167–180. DOI: 10.7673/j.issn.1006-2793.2022.02.001. Editorial Department of JSRT. Development review of solid propulsion technology in 2021 [J]. Journal of Solid Rocket Technology, 2022, 45(2): 167–180. DOI: 10.7673/j.issn.1006-2793.2022.02.001.
[2]	田维平, 王立武, 王伟. 固体火箭发动机技术发展和面临的关键技术问题 [J]. 固体火箭技术, 2021, 44(1): 4–8. DOI: 10.7673/j.issn.1006-2793.2021.01.002. TIAN W P, WANG L W, WANG W. Technological development and key technical problems in solid rocket motors [J]. Journal of Solid Rocket Technology, 2021, 44(1): 4–8. DOI: 10.7673/j.issn.1006-2793.2021.01.002.
[3]	刘继宁, 李苗苗, 陶锴, 等. 固体推进剂铝基燃料高效燃烧的研究进展 [J]. 上海航天, 2019, 36(S1): 1–6. DOI: 10.19328/j.cnki.1006-1630.2019.S1.001. LIU J N, LI M M, TAO K, et al. Research progress on high combustion performance of aluminum based fuel in solid propellant [J]. Aerospace Shanghai, 2019, 36(S1): 1–6. DOI: 10.19328/j.cnki.1006-1630.2019.S1.001.
[4]	GILL R J, BADIOLA C, DREIZIN E L. Combustion times and emission profiles of micron-sized aluminum particles burning in different environments [J]. Combustion and Flame, 2010, 157(11): 2015–2023. DOI: 10.1016/j.combustflame.2010.02.023.
[5]	MOHAN S, FURET L, DREIZIN E L. Aluminum particle ignition in different oxidizing environments [J]. Combustion and Flame, 2010, 157(7): 1356–1363. DOI: 10.1016/j.combustflame.2009.11.010.
[6]	BADIOLA C, GILL R J, DREIZIN E L. Combustion characteristics of micron-sized aluminum particles in oxygenated environments [J]. Combustion and Flame, 2011, 158(10): 2064–2070. DOI: 10.1016/j.combustflame.2011.03.007.
[7]	TAO H. Shock wave ignition of aluminum particles [J]. Journal De Physique Ⅳ, 2002, 12(7): 105–112. DOI: 10.1051/jp4:20020272.
[8]	胡栋, 叶松, 吴旌贺, 等. 铝粉点火微观机理的光谱研究 [J]. 高压物理学报, 2006, 20(3): 237–242. DOI: 10.11858/gywlxb.2006.03.003. HU D, YE S, WU J H, et al. The spectro-studies on micro-mechanism of shock ignition for aluminium [J]. Chinese Journal of High Pressure Physics, 2006, 20(3): 237–242. DOI: 10.11858/gywlxb.2006.03.003.
[9]	ROBERTS T A, BURTON R L, KRIER H. Ignition and combustion of aluminummagnesium alloy particles in O₂ at high pressures [J]. Combustion and Flame, 1993, 92(1/2): 125–143. DOI: 10.1016/0010-2180(93)90203-F.
[10]	FOELSCHE R O, BURTON R L, KRIER H. Ignition and combustion of aluminum particles in H₂/O₂/N₂ combustion products [J]. Journal of Propulsion and Power, 1998, 14(6): 1001–1008. DOI: 10.2514/2.5365.
[11]	BELYAEV A F, FROLOV Y V, KOROTKOV A I. Combustion and ignition of particles of finely dispersed aluminum [J]. Combustion, Explosion and Shock Waves, 1971, 4(3): 182–185. DOI: 10.1007/BF00750857.
[12]	FRIEDMAN R, MAČEK A. Combustion studies of single aluminum particles [J]. Symposium (International) on Combustion, 1963, 9(1): 703–712. DOI: 10.1016/S0082-0784(63)80078-8.
[13]	TAKAHASHI K, OIDE S, KUWAHARA T. Agglomeration characteristics of aluminum particles in AP/AN composite propellants [J]. Propellants, Explosives, Pyrotechnics, 2013, 38(4): 555–562. DOI: 10.1002/prep.201200187.
[14]	ANAND K V, ROY A, MULLA I, et al. Experimental data and model predictions of aluminium agglomeration in ammonium perchlorate-based composite propellants including plateau-burning formulations [J]. Proceedings of the Combustion Institute, 2013, 34(2): 2139–2146. DOI: 10.1016/j.proci.2012.07.024.
[15]	刘佩进, 白俊华, 杨向明, 等. 固体火箭发动机燃烧室凝相粒子的收集与分析 [J]. 固体火箭技术, 2008, 31(5): 461–463, 479. DOI: 10.3969/j.issn.1006-2793.2008.05.009. LIU P J, BAI J H, YANG X M, et al. Collection and analysis on the condensed-phase particles in the chamber of SRM [J]. Journal of Solid Rocket Technology, 2008, 31(5): 461–463, 479. DOI: 10.3969/j.issn.1006-2793.2008.05.009.
[16]	曹向宇. 固体推进剂中铝颗粒温度测量方法及燃烧特性试验研究 [D]. 长沙: 国防科技大学, 2018: 51–52. DOI: 10.27052/d.cnki.gzjgu.2018.001156. CAO X Y. Experimental study on temperature measurement and combustion characteristics of aluminum particles in solid propellant [D]. Changsha: National University of Defense Technology, 2018: 51–52. DOI: 10.27052/d.cnki.gzjgu.2018.001156.
[17]	郝海霞, 裴庆, 赵凤起, 等. 固体推进剂激光点火性能研究综述 [J]. 含能材料, 2009, 17(4): 491–498. DOI: 10.3969/j.issn.1006-9941.2009.04.028. HAO H X, PEI Q, ZHAO F Q, et al. Summarization of laser ignition characteristics of solid propellants [J]. Chinese Journal of Energetic Materials, 2009, 17(4): 491–498. DOI: 10.3969/j.issn.1006-9941.2009.04.028.
[18]	敖文, 刘佩进, 吕翔, 等. 固体推进剂燃烧过程铝团聚研究进展 [J]. 宇航学报, 2016, 37(4): 371–380. DOI: 10.3873/j.issn.1000-1328.2016.04.001. AO W, LIU P J, LV X, et al. Review of aluminum agglomeration during the combustion of solid propellants [J]. Journal of Astronautics, 2016, 37(4): 371–380. DOI: 10.3873/j.issn.1000-1328.2016.04.001.
[19]	BECKSTEAD M W, LIANG Y, PUDDUPPAKKAM K V. Numerical simulation of single aluminum particle combustion: Review [J]. Combustion, Explosion, and Shock Waves, 2005, 41(6): 622–638. DOI: 10.1007/s10573-005-0077-0.
[20]	BUCHER P, YETTER R A, DRYER F L, et al. PLIF species and ratiometric temperature measurements of aluminum particle combustion in O₂, CO₂ and N₂O oxidizers, and comparison with model calculations [J]. Symposium (International) on Combustion, 1998, 27(2): 2421–2429. DOI: 10.1016/S0082-0784(98)80094-5.
[21]	张炜, 朱慧. 铝镁贫氧推进剂低压燃烧性能表征方法研究 [J]. 含能材料, 2002, 10(3): 125–127. DOI: 10.3969/j.issn.1006-9941.2002.03.009. ZHANG W, ZHU H. Characterization methods of combustion properties of aluminum-magnesium fuel-rich propellant at low pressure [J]. Chinese Journal of Energetic Materials, 2002, 10(3): 125–127. DOI: 10.3969/j.issn.1006-9941.2002.03.009.
[22]	张林, 张志杰, 李岩峰. 双波段比色测温技术的应用 [J]. 现代电子技术, 2019, 42(8): 1–5. DOI: 10.16652/j.issn.1004-373x.2019.08.001. ZHANG L, ZHANG Z J, LI Y F. Application of dual-waveband colorimetric temperature measurement technology [J]. Modern Electronics Technique, 2019, 42(8): 1–5. DOI: 10.16652/j.issn.1004-373x.2019.08.001.
[23]	闫白, 郝晓剑, 周汉昌. 基于比色法的纯镁及镁合金燃点测试系统 [J]. 激光与光电子学进展, 2013, 50(11): 112301. DOI: 10.3788/LOP50.112301. YAN B, HAO X J, ZHOU H C. Ignition test system of pure magnesium and magnesium alloys based on colorimetric method [J]. Laser & Optoelectronics Progress, 2013, 50(11): 112301. DOI: 10.3788/LOP50.112301.

Relative Articles

[1]	YUAN Yongxiang, LIU Yuexun, ZHAO Meng, WANG Long, HOU Chuantao, WANG Xuanjun, WU Shengchuan. In-situ tomography on damage evolution of solid propellant under dynamic loading[J]. Explosion And Shock Waves. doi: 10.11883/bzycj-2024-0315
[2]	ZHANG Haijun, NIE Jianxin, WANG Ling, WANG Dong, HU Feng, GUO Xueyong. Effect of pre-ignition on slow cook-off response characteristics of composite propellant[J]. Explosion And Shock Waves, 2022, 42(10): 102901. doi: 10.11883/bzycj-2021-0521
[3]	WU Junying, LI Yaojiang, YANG Lijun, LIU Jiaxi, WU Jiaojiao, ZHANG Xiaozhou, CHEN Lang. Shock initiation characteristics of four-component HTPB solid propellant containing RDX[J]. Explosion And Shock Waves, 2021, 41(8): 082301. doi: 10.11883/bzycj-2020-0350
[4]	ZHAO Shengwei, Zhou Gang, DING Yang, WANG Changli. Experimental investigation on deflagration to detonation transition of HMX/TNT/AL compositions at fast thermal ignition[J]. Explosion And Shock Waves, 2019, 39(3): 032103. doi: 10.11883/bzycj-2017-0396
[5]	TONG Xin, LI Long, MA Sai'er, XU Jinsheng, ZHENG Ya. Heat dissipation of HTPB propellant under impact loading[J]. Explosion And Shock Waves, 2018, 38(6): 1255-1261. doi: 10.11883/bzycj-2017-0219
[6]	Zhang Fengguo, Hu Xiaomian, Wang Pei, Shao Jianli, Zhou Hongqiang, Feng Qijing. Numerical analysis of spall response in aluminum with helium bubbles[J]. Explosion And Shock Waves, 2017, 37(4): 699-704. doi: 10.11883/1001-1455(2017)04-0699-06
[7]	Sun Chao-xiang, Ju Yu-tao, Zheng Ya, Wang Peng-bo, Zhang Jun-fa. Mechanical properties of double-base propellant at high strain rates and its damage-modified ZWT constitutive model[J]. Explosion And Shock Waves, 2013, 33(5): 507-512. doi: 10.11883/1001-1455(2013)05-0507-06
[8]	TIAN Zhan-dong, ZHANG Zhen-yu, LU Fang-yun, ZHAOJian-heng. Modelingandsimulationoflaser-inducedignition usingdetailedchemicalkinetics[J]. Explosion And Shock Waves, 2011, 31(3): 285-289. doi: 10.11883/1001-1455(2011)03-0285-05
[9]	ZHANG Ling-ke, ZHOU Yan-huang, YU Yong-gang, LU Xin, LIU Dong-yao. Effectsofencroachmentanddesquamationofignitionjet oncombustionpropertyofbasebleedpropellant[J]. Explosion And Shock Waves, 2010, 30(6): 658-663. doi: 10.11883/1001-1455(2010)06-0658-06
[10]	WANG Yong-jie, LU Jian-ying, WU Jun-ying, CHEN Lang. Low-amplitude shock-induced delayed detonation of solid propellant[J]. Explosion And Shock Waves, 2009, 29(2): 131-136. doi: 10.11883/1001-1455(2009)02-0131-06