Blast resistance of polyurea/reinforced concrete thick slab composite structures under contact explosion

XU Zhaowei; WANG Wei; LI Yishuo; ZHANG Zhonghao; ZHANG Congkun

doi:10.11883/bzycj-2024-0083

Volume 45 Issue 3

Mar. 2025

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2025 > 45(3): 033104

BAI Jingsong, LIU Yang, CHEN Han, ZHONG Min. Construction of end-to-end machine learning surrogate model and its application in detonation driving problem[J]. Explosion And Shock Waves. doi: 10.11883/bzycj-2024-0099

Citation:

XU Zhaowei, WANG Wei, LI Yishuo, ZHANG Zhonghao, ZHANG Congkun. Blast resistance of polyurea/reinforced concrete thick slab composite structures under contact explosion[J]. Explosion And Shock Waves, 2025, 45(3): 033104. doi: 10.11883/bzycj-2024-0083

Citation:

PDF( 6778 KB)

Blast resistance of polyurea/reinforced concrete thick slab composite structures under contact explosion

doi: 10.11883/bzycj-2024-0083

Key Laboratory of Impact and Safety Engineering, Ministry of Education, Ningbo University, Ningbo 315211, Zhejiang, China

Received Date: 2024-03-28
Rev Recd Date: 2024-06-05

Available Online: 2024-06-06

Publish Date: 2025-03-05

Abstract

Abstract

Reinforced concrete slabs, as the main load-bearing components in the structure of construction projects, are very likely to suffer serious damage in explosive accidents, while polyurea elastomers, with their better anti-blast and anti-impact properties, have been widely used in the field of protective engineering. It is well known that the mechanical properties and deformation mechanisms of thin slabs in the range from 100 mm to 250 mm and thick concrete slabs above 250 mm are not the same, and the thickness of reinforced concrete substrates studied so far is generally concentrated in the range from 100 mm to 250 mm, and there are relatively few studies on thick slabs of polyurea-coated reinforced concrete with a slab thickness of 250 mm or more. In order to study the anti-blast performance of the polyurea/reinforced concrete thick slab composite structure, firstly, the contact explosion experiments were carried out on the polyurea/reinforced concrete thick slab composite structure with different charges, while the overall and local damage characteristics were analyzed. Secondly, numerical simulations were carried out using LS-DYNA finite element simulation software to verify the correctness of the numerical model by comparing with the experimental results. Based on LS-DYNA finite element simulations, the damage process of polyurea/reinforced concrete thick plate composite structure and the evolution of shock wave inside the polyurea/reinforced concrete thick plate were investigated, which revealed the anti-blast mechanism of the polyurea coating, and further analyzed the damage mode and damage characteristics of the polyurea/reinforced concrete thick plate composite structure. The experimental and finite element results showed that the polyurea/steel-reinforced concrete composite structure exhibited six damage modes under the contact explosion load (i.e., crate; spall; spall and bulge; threshold spall, bulging deformation of the polyurea coating; severe spall, serious bulging deformation of the polyurea coating; perforation). The investigation also demonstrated that the backside polyurea-coated reinforced concrete thick slabs effectively improved the anti-blast performance of the composite structure. The results of the study can provide a basis and reference for the design of blast resistance of polyurea/reinforced concrete thick slab composite structures.
- contact explosion,
- reinforced concrete thick slab,
- polyurea coating,
- anti-blast performance,
- damage mode

FullText(HTML)

References(35)

References

[1]	ZHAO C F, HE K C, ZHI L H, et al. Blast behavior of steel-concrete-steel sandwich panel: experiment and numerical simulation [J]. Engineering Structures, 2021, 246: 112998. DOI: 10.1016/j.engstruct.2021.112998.
[2]	杨光瑞, 汪维, 杨建超, 等. POZD涂覆波纹钢加固钢筋混凝土板抗爆性能 [J]. 兵工学报, 2023, 44(5): 1374–1383. DOI: 10.12382/bgxb.2022.0024. YANG G Y, WANG W, YANG J C, et al. Blast resistance of reinforced concrete slabs strengthened with POZD coated corrugated steel [J]. Acta Armamentarii, 2023, 44(5): 1374–1383. DOI: 10.12382/bgxb.2022.0024.
[3]	HONG J, FANG Q, CHEN L, et al. Numerical predictions of concrete slabs under contact explosion by modified K&C material model [J]. Construction and Building Materials, 2017, 155: 1013–1024. DOI: 10.1016/j.conbuildmat.2017.08.060.
[4]	REBELO H B, CISMASIU C. Robustness assessment of a deterministically designed sacrificial cladding for structural protection [J]. Engineering Structures, 2021, 240: 112279. DOI: 10.1016/j.engstruct.2021.112279.
[5]	LI J, WU C Q, HAO H. Investigation of ultra-high performance concrete slab and normal strength concrete slab under contact explosion [J]. Engineering Structures, 2015, 102: 395–408. DOI: 10.1016/j.engstruct.2015.08.032.
[6]	蔡路军, 曾成林, 陈少杰, 等. 塑钢纤维混凝土板抗爆性能的试验研究及数值模拟 [J]. 混凝土, 2022(11): 6–10. DOI: 10.3969/j.issn.1002-3550.2022.11.002. CAI L J, ZENG C L, CHEN S J, et al. Experimental study and numerical simulation of anti-blast performance of plastic steel fiber concrete slab [J]. Concrete, 2022(11): 6–10. DOI: 10.3969/j.issn.1002-3550.2022.11.002.
[7]	LEE M J, KWAK H G. Numerical simulations of blast responses for SFRC slabs using an orthotropic model [J]. Engineering Structures, 2021, 238: 112150. DOI: 10.1016/j.engstruct.2021.112150.
[8]	姜天华, 王威, 杨云锋, 等. 钢纤维混凝土箱梁在爆炸荷载作用下的动态响应 [J]. 混凝土与水泥制品, 2019(9): 50–53. DOI: 10.19761/j.1000-4637.2019.09.050.04. JIANG T H, WANG W, YANG Y F, et al. Dynamic response of the steel fiber reinforced concrete box girders under blast loading [J]. China Concrete and Cement Products, 2019(9): 50–53. DOI: 10.19761/j.1000-4637.2019.09.050.04.
[9]	HE J T, LEI D, SHE Z S, et al. Flexural performance and damage evaluation on basalt fiber reinforced polymer (BFRP) sheet reinforced concrete [J]. Construction and Building Materials, 2023, 395: 132321. DOI: 10.1016/j.conbuildmat.2023.132321.
[10]	LI S S, HE H G, YANG D P, et al. Blast responses of BFRP-bar reinforced AAC panels [J]. Construction and Building Materials, 2023, 365: 129655. DOI: 10.1016/j.conbuildmat.2022.129655.
[11]	GAO Y J, ZHOU Y Z, ZHOU J N, et al. Blast responses of one-way sea-sand seawater concrete slabs reinforced with BFRP bars [J]. Construction and Building Materials, 2020, 232: 117254. DOI: 10.1016/j.conbuildmat.2019.117254.
[12]	YANG F, FENG W H, LIU F, et al. Experimental and numerical study of rubber concrete slabs with steel reinforcement under close-in blast loading [J]. Construction and Building Materials, 2019, 198: 423–436. DOI: 10.1016/j.conbuildmat.2018.11.248.
[13]	YU J, LIANG S L, REN Z P, et al. Structural behavior of steel-concrete-steel and steel-ultra-high-performance-concrete-steel composite panels subjected to near-field blast load [J]. Journal of Constructional Steel Research, 2023, 210: 108108. DOI: 10.1016/j.jcsr.2023.108108.
[14]	ZHAO C F, LU X, WANG Q, et al. Experimental and numerical investigation of steel-concrete (SC) slabs under contact blast loading [J]. Engineering Structures, 2019, 196: 109337. DOI: 10.1016/j.engstruct.2019.109337.
[15]	王逸平, 汪维, 杨建超, 等. 钢板/POZD复合结构在近距空爆载荷下的抗爆性能 [J]. 高压物理学报, 2023, 37(1): 014104. DOI: 10.11858/gywlxb.20220650. WANG Y P, WANG W, YANG J C, et al. Blast resistant performance of steel/POZD composite structures under close-range air blast loading [J]. Chinese Journal of High Pressure Physics, 2023, 37(1): 014104. DOI: 10.11858/gywlxb.20220650.
[16]	ZHANG H, CHANG B X, PENG K F, et al. Anti-blast analysis and design of a sacrificial cladding with graded foam-filled tubes [J]. Thin-Walled Structures, 2023, 182: 110313. DOI: 10.1016/j.tws.2022.110313.
[17]	KOSTOPOULOS V, KALIMERIS G D, GIANNAROS E. Blast protection of steel reinforced concrete structures using composite foam-core sacrificial cladding [J]. Composites Science and Technology, 2022, 230: 109330. DOI: 10.1016/j.compscitech.2022.109330.
[18]	王大江, 李鑫, 朱健. 爆炸载荷下蜂窝/波纹夹芯方板的动力学行为研究 [J]. 太原理工大学学报, 2018, 49(6): 881–885. DOI: 10.16355/j.cnki.issn1007-9432tyut.2018.06.012. WANG D J, LI X, ZHU J. Dynamic behavior of honeycomb/corrugated sandwich plates under blast loading [J]. Journal of Taiyuan University of Technology, 2018, 49(6): 881–885. DOI: 10.16355/j.cnki.issn1007-9432tyut.2018.06.012.
[19]	KUMAR R, PATEL S. Failure analysis on octagonal honeycomb sandwich panel under air blast loading [J]. Materials Today: Proceedings, 2021, 46: 9667–9672. DOI: 10.1016/j.matpr.2020.07.525.
[20]	CHEN Y S, WANG B, ZHANG B, et al. Polyurea coating for foamed concrete panel: an efficient way to resist explosion [J]. Defence Technology, 2020, 16(1): 136–149. DOI: 10.1016/j.dt.2019.06.010.
[21]	RAMAN S N, NGO T, MENDIS P, et al. Elastomeric polymers for retrofitting of reinforced concrete structures against the explosive effects of blast [J]. Advances in Materials Science and Engineering, 2012, 2012: 754142. DOI: 10.1155/2012/754142.
[22]	汪维, 杨建超, 汪剑辉, 等. POZD涂层方形钢筋混凝土板抗接触爆炸试验研究 [J]. 爆炸与冲击, 2020, 40(12): 121402. DOI: 10.11883/bzycj-2020-0180. WANG W, YANG J C, WANG J H, et al. Experimental research on anti-contact explosion of POZD coated square reinforced concrete slab [J]. Explosion and Shock Waves, 2020, 40(12): 121402. DOI: 10.11883/bzycj-2020-0180.
[23]	杨建超, 汪剑辉, 王幸, 等. 聚异氰氨酸脂噁唑烷弹性涂层钢筋混凝土板抗震塌机理 [J]. 科学技术与工程, 2022, 22(4): 1338–1343. DOI: 10.3969/j.issn.1671-1815.2022.04.005. YANG J C, WANG J H, WANG X, et al. Anti-collapsing mechanism of reinforced concrete slab with polyisocyanate-oxazodone elastic coating [J]. Science Technology and Engineering, 2022, 22(4): 1338–1343. DOI: 10.3969/j.issn.1671-1815.2022.04.005.
[24]	彭培, 李展, 张亚栋, 等. 燃气爆炸作用下蒸压加气混凝土砌体墙的加固性能 [J]. 爆炸与冲击, 2020, 40(3): 035101. DOI: 10.11883/bzycj-2018-0252. PENG P, LI Z, ZHANG Y D, et al. Performance of retrofitted autoclaved aerated concrete masonry walls subjected to gas explosions [J]. Explosion and Shock Waves, 2020, 40(3): 035101. DOI: 10.11883/bzycj-2018-0252.
[25]	WANG W, ZHANG D, LU F Y, et al. Experimental study on scaling the explosion resistance of a one-way square reinforced concrete slab under a close-in blast loading [J]. International Journal of Impact Engineering, 2012, 49: 158–164. DOI: 10.1016/j.ijimpeng.2012.03.010.
[26]	陈锐林, 李康, 董琪, 等. CFRP加固钢筋混凝土板爆炸冲击作用下动力响应分析的数值模拟 [J]. 铁道科学与工程学报, 2020, 17(6): 1517–1527. DOI: 10.19713/j.cnki.43-1423/u.T20180143. CHEN R L, LI K, DONG Q, et al. Numerical simulation of dynamic response analysis of reinforced concrete slabs strengthened with CFRP under blast load [J]. Journal of Railway Science and Engineering, 2020, 17(6): 1517–1527. DOI: 10.19713/j.cnki.43-1423/u.T20180143.
[27]	王喜梦, 刘均, 陈长海, 等. 近距空爆载荷下钢板/聚脲复合结构动响应特性仿真 [J]. 中国舰船研究, 2021, 16(2): 116–124. DOI: 10.19693/j.issn.1673-3185.01833. WANG X M, LIU J, CHEN C H, et al. Simulation on dynamic response characteristics of steel/polyurea composite structures under close-range air blast loading [J]. Chinese Journal of Ship Research, 2021, 16(2): 116–124. DOI: 10.19693/j.issn.1673-3185.01833.
[28]	ZHAO C F, CHEN J Y. Damage mechanism and mode of square reinforced concrete slab subjected to blast loading [J]. Theoretical and Applied Fracture Mechanics, 2013, 63/64: 54–62. DOI: 10.1016/j.tafmec.2013.03.006.
[29]	TAO C, JI C, TU J, et al. Protection mechanism of liquid-filled welded square steel container with polyurea elastomer subjected to small-arms bullet [J]. Thin-Walled Structures, 2024, 198: 111668. DOI: 10.1016/j.tws.2024.111668.
[30]	赵苏政, 葛文璇. 聚脲涂层防护下钢筋混凝土柱的抗爆性能研究 [J]. 工程爆破, 2022, 28(6): 85–91. DOI: 10.19931/j.EB.20210253. ZHAO S Z, GE W X. Study on anti-detonation performance of reinforced concrete columns protected by polyurea coating [J]. Engineering Blasting, 2022, 28(6): 85–91. DOI: 10.19931/j.EB.20210253.
[31]	张鹏. 聚脲涂覆结构抗弹抗爆防护性能与机制研究 [D]. 太原: 中北大学, 2020. ZHANG P. Protection performance and mechanism of polyurea coated structures under ballistic and blast loading conditions [D]. Taiyuan: North University of China, 2020.
[32]	张天锡. 工程爆破中卸载波与加载波互相作用的初步讨论 [J]. 爆破, 2010, 27(2): 18–21. DOI: 10.3963/j.issn.1001-487X.2010.02.005. ZHANG T X. Discussion on interaction between unloading wave and loading wave in blasting [J]. Blasting, 2010, 27(2): 18–21. DOI: 10.3963/j.issn.1001-487X.2010.02.005.
[33]	ZHU W Q, XIAO Y, YU J H, et al. Damage modes and mechanism of steel-concrete composite bridge slabs under contact explosion [J]. Journal of Constructional Steel Research, 2024, 212: 108223. DOI: 10.1016/j.jcsr.2023.108223.
[34]	MCVAY M K. Spall damage of concrete structures [R]. USA: Mississippi State University. 1988: 204–209.
[35]	YU X, ZHOU B K, HU F, et al. Experimental investigation of basalt fiber-reinforced polymer (BFRP) bar reinforced concrete slabs under contact explosions [J]. International Journal of Impact Engineering, 2020, 144: 103632. DOI: 10.1016/j.ijimpeng.2020.103632.

Relative Articles

[1]	WEI Heguang, ZHOU Mingzhe, ZHU Ruiqing, HU Lingling. Mechanical and electrical degradation of impaired batteries after impact loading[J]. Explosion And Shock Waves, 2025, 45(2): 021421. doi: 10.11883/bzycj-2024-0312
[2]	GUO Delong, REN Yunyan, XU Yuxin, LI Yongpeng, LI Xudong, YANG Xiang. Effect of explosion location on impact response of titanium alloy directional detonation container[J]. Explosion And Shock Waves, 2024, 44(2): 025102. doi: 10.11883/bzycj-2023-0126
[3]	LI Xiangshang, ZHENG Junjie, SONG Yanqi, GUO Deyong, MA Hongfa, WANG Jiamin. On infiltration enhancement mechanism of shaped charge blasting in high gas and low permeability coal seam[J]. Explosion And Shock Waves, 2023, 43(5): 055201. doi: 10.11883/bzycj-2022-0164
[4]	SHA Minggong, SUN Ying, LI Yutong, LIU Yiming, LI Yulong. Dynamic experimental study on damage behaviors of aircraft envelope coating under the impact of high-speed raindrops[J]. Explosion And Shock Waves, 2023, 43(8): 083304. doi: 10.11883/bzycj-2023-0005
[5]	MA Fulin, YANG Nana, ZHAO Tianyou, CHEN Zhipeng, YAO Xiongliang. Peridynamic damage simulation of ship composite structures subjected to combined action of shock wave and fragments[J]. Explosion And Shock Waves, 2022, 42(3): 033304. doi: 10.11883/bzycj-2021-0080
[6]	LI Pengcheng, ZHANG Xianfeng, LIU Chuang, WEI Haiyang, LIU Junwei, DENG Yuxuan. Study on the influence of attack angle and incident angle on ballistic characteristics of projectiles penetration into thin concrete targets[J]. Explosion And Shock Waves, 2022, 42(11): 113302. doi: 10.11883/bzycj-2021-0435
[7]	YUAN Liangzhu, MIAO Chunhe, SHAN Junfang, WANG Pengfei, XU Songlin. On strain-rate and inertia effects of concrete samples under impact[J]. Explosion And Shock Waves, 2022, 42(1): 013101. doi: 10.11883/bzycj-2021-0114
[8]	SONG Yiping, MIAO Chunhe, SHAN Junfang, WANG Pengfei, XU Songlin. Effect of stress-state adjustment on fragmentation behavior of quartz glass beads subjected to low-velocity impact[J]. Explosion And Shock Waves, 2022, 42(7): 073103. doi: 10.11883/bzycj-2021-0244
[9]	YU Tongxi, ZHU Ling, XU Jun. Progress in structural impact dynamics during 2010−2020[J]. Explosion And Shock Waves, 2021, 41(12): 121401. doi: 10.11883/bzycj-2021-0113
[10]	ZHANG Shiwen, LI Yinglei, CHEN yan, DAN Jiakun, GUO Zhaoliang, LIU Mingtao. Investigation on the technology of soft recovery of fragment produced by metal cylindrical shell subjected to explosive loading[J]. Explosion And Shock Waves, 2021, 41(11): 114102. doi: 10.11883/bzycj-2020-0449
[11]	MA Yan, YUAN Fuping, WU Xiaolei. Dynamic shear behaviors and microstructural deformation mechanisms in FeNiAlC dual-phase high strength alloy[J]. Explosion And Shock Waves, 2021, 41(1): 011404. doi: 10.11883/bzycj-2020-0224
[12]	YANG Nana, ZHAO Tianyou, CHEN Zhipeng, WU Guoxun, YAO Xiongliang. Peridynamic simulation of damage of ship composite structure under fragments impact[J]. Explosion And Shock Waves, 2020, 40(2): 023302. doi: 10.11883/bzycj-2019-0019
[13]	HU Ling, ZHENG Hang, FENG Qijie, ZHOU Wei, YE Xiangping, LU Lei. Mechanical behavior of long-term neutron-irradiated Al-Mg-Si alloy under compression[J]. Explosion And Shock Waves, 2019, 39(12): 123101. doi: 10.11883/bzycj-2018-0483
[14]	CHU Wenhua, ZHU Dongjun, LIANG Deli, FENG Feng, WEI Sijun. Dynamic characteristics of three-dimensional complex structure based on coupling algorithm[J]. Explosion And Shock Waves, 2018, 38(4): 725-734. doi: 10.11883/bzycj-2016-0283
[15]	ZHANG Shiwen, LONG Jianhua, JIA Hongzhi, LIU Cangli. Influence of cylindrical shell on spatial distribution of pressure during propagation of divergent shockwave[J]. Explosion And Shock Waves, 2018, 38(2): 345-352. doi: 10.11883/bzycj-2016-0214
[16]	Fu Zheng, Liu Jun, Feng Qijing, Wang Zheng, Zhang Shudao. A CEL method with changeable computational domain[J]. Explosion And Shock Waves, 2017, 37(3): 528-535. doi: 10.11883/1001-1455(2017)03-0528-08
[17]	Wu Jinguo, Lin Qinghua, Wan Gang, Jin Yong, Li Haiyuan, Li Baoming. 3D numerical research of railgun gouging mechanism based on material point method[J]. Explosion And Shock Waves, 2017, 37(2): 307-314. doi: 10.11883/1001-1455(2017)02-0307-08
[18]	Tan Mengting, Zhang Xianfeng, Ge Xiankun, Liu Chuang, Xiong Wei. Theoretical model of interface defeat/penetration transition velocity of ceramic armor impacted by long-rod projectile[J]. Explosion And Shock Waves, 2017, 37(6): 1093-1100. doi: 10.11883/1001-1455(2017)06-1093-08
[19]	HUANG Xia, TANG Wen-hui, JIANG Bang-hai. Constitutiverelationforanisotropicmaterialsunderplane-strainconditions anditsapplicationtostress-wavepropagationsimulation[J]. Explosion And Shock Waves, 2010, 30(4): 383-389. doi: 10.11883/1001-1455(2010)04-0383-07
[20]	WANG Li-li, WANG Yong-gang. The important role of stress waves in the study on dynamic constitutive behavior of materials by SHPB[J]. Explosion And Shock Waves, 2005, 25(1): 17-25. doi: 10.11883/1001-1455（2005）01-0017-09