Magnetically applied pressure shear for directly measuring dynamic strength of materials

WANG Guiji; LUO Binqiang; CHEN Xuemiao; ZHAO Jianheng; CHEN Guanghua; TAN Fuli; SUN Chengwei; WU Gang

doi:10.11883/bzycj-2017-0019

Volume 38 Issue 2

Jan. 2018

Turn off MathJax

Article Contents

Article Navigation > Explosion And Shock Waves > 2018 > 38(2): 258-265

WANG Guiji, LUO Binqiang, CHEN Xuemiao, ZHAO Jianheng, CHEN Guanghua, TAN Fuli, SUN Chengwei, WU Gang. Magnetically applied pressure shear for directly measuring dynamic strength of materials[J]. Explosion And Shock Waves, 2018, 38(2): 258-265. doi: 10.11883/bzycj-2017-0019

Citation:

WANG Guiji, LUO Binqiang, CHEN Xuemiao, ZHAO Jianheng, CHEN Guanghua, TAN Fuli, SUN Chengwei, WU Gang. Magnetically applied pressure shear for directly measuring dynamic strength of materials[J]. Explosion And Shock Waves, 2018, 38(2): 258-265. doi: 10.11883/bzycj-2017-0019

Citation:

WANG Guiji, LUO Binqiang, CHEN Xuemiao, ZHAO Jianheng, CHEN Guanghua, TAN Fuli, SUN Chengwei, WU Gang. Magnetically applied pressure shear for directly measuring dynamic strength of materials[J]. Explosion And Shock Waves, 2018, 38(2): 258-265. doi: 10.11883/bzycj-2017-0019

PDF( 3374 KB)

Magnetically applied pressure shear for directly measuring dynamic strength of materials

doi: 10.11883/bzycj-2017-0019

Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621999, Sichuan, China

Received Date: 2017-01-13
Rev Recd Date: 2017-02-24
Publish Date: 2018-03-25

Abstract

Abstract

This paper presents a novel method for directly measuring material strength under dynamic loading, namely the technique of magnetically applied pressure shear (MAPS). The relationship between the stress deviation and the yield strength under MAPS was analyzed theoretically and numerically. The time-space evolutions of the stress deviation and yield strength under MAPS were characterized and calculated. Experiments were conducted based on the CQ-4 and 10 T quasi-static magnetic field generator, both developed by ourselves, using a dual laser heterodyne velocimetry (DLHV), to study the technology of MAPS under ramp wave loadings. The compression strengths of cold rolled pure aluminum and polished pure aluminum under ramp loading were measured and the reliable experimental data were obtained. The results show that the technique of MAPS provides a novel and reliable technique for directly measuring high-pressure strength and can be reliably applied
- material strength,
- magnetically applied pressure shear,
- ramp wave compression,
- quasi-static magnetic field

FullText(HTML)

References(29)

References

[1]	FOWLES G R. Shock wave compression of hardened and annealed 2024 aluminum[J]. Journal of Applied Physics, 1961, 32(8):1475-1487. doi: 10.1063/1.1728382
[2]	ASAY J R, LIPKIN J. A self-consistent technique for estimating the dynamic yield strength of a shock-loaded materials[J]. Journal of Applied Physics, 1978, 49(7):4242-4247. doi: 10.1063/1.325340
[3]	IGONIN V V, IGNATOVA O N, LEBEDEV A I, et al. Influence of dynamic properties on perturbation growth in tantalum[J]. AIP Conference, 2009, 1195(1):1085-1088. http://www.osti.gov/scitech/biblio/21366836-influence-dynamic-properties-perturbation-growth-tantalum
[4]	LORENZ K T, EDWARDS M J, GLENDINNING S G, et al. Accessing ultrahigh-pressure, quasi-isentropic states of matter[J]. IEEE International Conference on Plasma Science, 2005, 12(5):104-104. https://www.researchgate.net/publication/234941223_Accessing_Ultra-High_Pressure_Quasi-Isentropic_States_of_Matter
[5]	PARK H S, LORENZ K T, CAVALLO R M, et al. Viscous Rayleigh-Taylor instability experiments at high pressure and strain rate[J]. Physical Review Letters, 2010, 104(13):135504. doi: 10.1103/PhysRevLett.104.135504
[6]	KOLLER L R, FOWLES G R. Simultaneous generation and measurement of longitudinal and shear waves in shock compressed media[M]. NewYork: Plenum Press, 1979:927.
[7]	YOUNG C, DUBUGNON O. A reflected shear wave technique for determining dynamic rock strength[J]. International Journal of Rock Mechanics and Mining Science & Geomechanics Abstracts, 1977, 14(15):247-259. https://www.researchgate.net/publication/245474538_A_Reflected_Shear-Wave_Technique_for_Determining_Dynamic_Rock_Strength
[8]	ABOU-SAYED A S, CLIFTON R J, HERMANN L. The oblique-plate impact experiment[J]. Experimental Mechanics, 1976, 16(4):127-132. doi: 10.1007/BF02321106
[9]	唐志平.压剪复合平板冲击加载技术进展及其应用[J].力学进展, 2007, 37(3):398-408. doi: 10.6052/1000-0992-2007-3-J2005-125 TANG Zhiping. Advance and application of pressure shear compound plate shock loading technique[J]. Advances in Mechanics, 2007, 37(3):398-408. doi: 10.6052/1000-0992-2007-3-J2005-125
[10]	徐松林, 唐志平, 谢卿, 等.压剪联合冲击下K9玻璃中的失效波[J].爆炸与冲击, 2005, 25(5):385-392. doi: 10.11883/1001-1455(2005)05-0385-08 XU Songlin, TANG Zhiping, XIE Qing, et al. Failure wave of K9 glass under pressure shear shock loading[J]. Explosion and Shock Waves, 2005, 25(5):385-392. doi: 10.11883/1001-1455(2005)05-0385-08
[11]	唐志平, 胡晓军, 廖香丽.压剪炮和压剪复合加载技术[J].中南工业大学学报, 2001, 32(增刊):9-12. TANG Zhiping, HU Xiaojun, LIAO Lixiang. Pressure shear compound loading technique and pressure shear gun[J]. Journal of Central South University of Technology, 2001, 32(Suppl):9-12.
[12]	马维, 段祝平.压剪复合应力波作用下材料动态断裂韧性研究[J].固体力学学报, 2002, 23(1):12-23. http://www.irgrid.ac.cn/handle/1471x/8290?mode=full MA Wei, DUAN Zhuping. Dynamic fracture toughness of materials under pressure shear complex stress waves[J]. Chinese Journal of Solid Mechanics, 2002, 23(1):12-23. http://www.irgrid.ac.cn/handle/1471x/8290?mode=full
[13]	JOHNSON J N. Shock propagation produced by planar impact in linearly elastic anisotropic media[J]. Journal of Applied Physics, 1971, 42(13):5522-5530.DOI: 10.1063/1.1659974.
[14]	CHHABILDAS L C, SWEGLE J W. Dynamic pressure-shear loading of materials using anisotropic crystals[J]. Journal of Applied Physics, 1980, 51(9):4799-4807.DOI: 10.1063/1.328312.
[15]	CHHABILDAS L C, SWEGLE J W. On the dynamical response of particulate-loaded materials Ⅰ: Pressure-shear loading of aluminum particles in an epoxy[J]. Journal of Applied Physics, 1982, 53(2):954-956.DOI: 10.1063/1.330574.
[16]	俞宇颖, 谭华, 戴诚达, 等.高压屈服强度测量方法比较研究[J].高压物理学报, 2013, 27(6):821-827. doi: 10.11858/gywlxb.2013.06.005 YU Yuying, TAN Hua, DAI Chengda, et al. Comparison of measurement methods of material strength at high pressure[J]. Chinese Journal of High Pressure Physics, 2013, 27(6):821-827. doi: 10.11858/gywlxb.2013.06.005
[17]	VOGLER T J, CHHABILDAS L C. Strength behavior of materials at high pressures[J]. International Journal of Impact Engineering, 2006, 33(1):812-825.DOI: 10.1016/j.ijimpeng.2006.09.069.
[18]	ASAY J R, AO T, DAVIS J P, et al. Effect of initial properties on the flow strength of aluminum during quasi-isentropic compression[J]. Journal of Applied Physics, 2008, 103(8):083514-722. doi: 10.1063/1.2902855
[19]	VOGLERT J, AO T, ASAY J R. High-pressure strength of aluminum under quasi-isentropic loading[J]. International Journal of Plasticity, 2009, 25(4):671-694. doi: 10.1016/j.ijplas.2008.12.003
[20]	ALEXANDER C S, ASAY J R, HAILL T A. Magnetically applied pressure-shear: A new method for direct measurement of strength at high pressure[J]. Journal of Applied Physics, 2010, 108(12):812. doi: 10.1063/1.3517790
[21]	WANG Guiji, LUO Binqiang, ZHANG Xuping, et al. A 4 MA, 500 ns pulsed power generator CQ-4 for characterization of material behaviors under ramp wave loading[J]. Review of Scientific Instruments, 2013, 84(1):015117. doi: 10.1063/1.4788935
[22]	王桂吉, 赵剑衡, 孙承纬, 等.磁驱动准等熵加载装置CQ-4的加载能力及主要应用[J].实验力学, 2015, 30(2):252-263. doi: 10.7520/1001-4888-15-001 WANG Guiji, ZHAO Jianheng, SUN Chengwei, et al. On the loading capability and main applications of magnetically driven quasi-isentropic compression device CQ-4[J]. Journal of Experimental Mechanics, 2015, 30(2):252-263. doi: 10.7520/1001-4888-15-001
[23]	陈学秒, 王桂吉, 章林文, 等.用于磁压剪技术的10 T准静态磁场发生器[J].强激光与粒子束, 2013, 25(8):2152-2156. http://www.opticsjournal.net/abstract.htm?id=OJ130729000111B9EbHd CHEN Xuemiao, WANG Guiji, ZHANG Linwen, et al. 10 T quasi-static magnetic field generator for magnetically applied pressure shear experiments[J]. High Power Laser and Particle Beams, 2013, 25(8):2152-2156. http://www.opticsjournal.net/abstract.htm?id=OJ130729000111B9EbHd
[24]	陈学秒, 万连茂, 王桂吉, 等.10T脉冲磁场的亥姆霍兹线圈热和力分析[J].强激光与粒子束, 2014, 26(5):053201. https://www.researchgate.net/profile/Guiji_Wang/publication/273709298_Thermal_and_stress_analysis_of_Helmholtz_coil_for_10_T_pulsed_magnetic_field_generation/links/556c3c7b08aeccd7773a3f5e.pdf?origin=publication_detail CHEN Xuemiao, WAN Lianmao, WANG Guiji, et al. Thermal and stress analysis of Helmholtz coil for 10T pulsed magnetic field generation[J]. High Power Laser and Particle Beams, 2014, 26(5):053201. https://www.researchgate.net/profile/Guiji_Wang/publication/273709298_Thermal_and_stress_analysis_of_Helmholtz_coil_for_10_T_pulsed_magnetic_field_generation/links/556c3c7b08aeccd7773a3f5e.pdf?origin=publication_detail
[25]	CHEN G H, WANG D T, LIU J, et al. A novel photonic Doppler velocimetry for transverse velocity measurement[J]. Review of Scientific Instruments, 2013, 84(1):013101. doi: 10.1063/1.4776186
[26]	罗斌强, 陈学秒, 王桂吉, 等.磁驱动压-剪联合加载下材料动态强度的直接测量[J].中国科学:物理学力学天文学, 2016, 46(11):114601-8. http://www.cnki.com.cn/Article/CJFDTotal-BZCJ201802003.htm LUO Binqiang, CHEN Xuemiao, WANG Guiji, et al. Direct measurement of material dynamic strength under high pressure using magnetically driven pressure-shear loading[J]. Scientia Sinica Physica: Mechanica & Astronomica, 2016, 46(11):114601-8. http://www.cnki.com.cn/Article/CJFDTotal-BZCJ201802003.htm
[27]	LUO B Q, CHEN X M, WANG G J, et al. Dynamic strength measurement of aluminum under magnetically driven ramp wave pressure-shear loading[J]. International Journal of Impact Engineering, 2017, 100(2):56-61. https://www.sciencedirect.com/science/article/pii/S0734743X16305139
[28]	MASHIMO T, NAKAMURA A, KODAMA M, et al. yielding and phase transition under shock compression of yttria-doped cubic zirconia single crystal and polycrystal[J]. Journal of Applied Physics, 1995, 77(10):5060-5068. doi: 10.1063/1.359314
[29]	DOLAN D H, AO T. Cubic zirconia as a dynamic compression window[J]. Journal of Applied Physics, 2008, 93(2):021908. https://www.researchgate.net/publication/224407434_Cubic_zirconia_as_a_dynamic_compression_window