Citation: | ZHANG Yuling, SHI Dongmei, ZHANG Yunfeng, LIU Guoqing, ZHEN Jianwei. Investigation of penetration ability and aftereffect of Zr-based metallic glass reinforced porous W matrix composite fragments[J]. Explosion And Shock Waves, 2021, 41(5): 053301. doi: 10.11883/bzycj-2020-0063 |
[1] |
张云峰, 罗兴柏, 施冬梅, 等. 动态压缩下Zr基非晶合金失效释能机理 [J]. 爆炸与冲击, 2019, 39(6): 063101. DOI: 10.11883/bzycj-2018-0114.
ZHANG Y F, LUO X B, SHI D M, et al. Failure behavior and energy release of Zr-based amorphous alloy under dynamic compression [J]. Explosion and Shock Waves, 2019, 39(6): 063101. DOI: 10.11883/bzycj-2018-0114.
|
[2] |
黄劲松, 刘咏, 陈仕奇, 等. 锆基非晶合金的研究进展与应用 [J]. 中国有色金属学报, 2003, 13(6): 1321–1332. DOI: 10.3321/j.issn:1004-0609.2003.06.001.
HUANG J S, LIU Y, CHEN S Q, et al. Progress and application of Zr-based amorphous alloys [J]. The Chinese Journal of Nonferrous Metals, 2003, 13(6): 1321–1332. DOI: 10.3321/j.issn:1004-0609.2003.06.001.
|
[3] |
阮芳, 姚可夫. 高强度Zr基大块非晶合金的研究进展 [J]. 材料导报, 2005, 19(9): 8–11. DOI: 10.3321/j.issn:1005-023X.2005.09.003.
RUAN F, YAO K F. Research progress of high strength Zr-based bulk amorphous alloys [J]. Materials Reports, 2005, 19(9): 8–11. DOI: 10.3321/j.issn:1005-023X.2005.09.003.
|
[4] |
INOUE A, ZHANG T, MASUMOTO T. Production of amorphous cylinder and sheet of La55Al25Ni20 alloy by a metallic mold casting method [J]. Materials Transactions, JIM, 1990, 31(5): 425–428. DOI: 10.2320/matertrans1989.31.425.
|
[5] |
ZHANG B, FU H M, SHA P F, et al. Anisotropic compressive deformation behaviors of tungsten fiber reinforced Zr-based metallic glass composites [J]. Materials Science and Engineering: A, 2013, 566: 16–21. DOI: 10.1016/j.msea.2012.12.080.
|
[6] |
张海峰. 非晶复合材料制备与性能 [J]. 中国材料进展, 2010, 29(11): 8–15.
ZHANG H F. Preparation and properties of amorphous composite materials [J]. Materials China, 2010, 29(11): 8–15.
|
[7] |
CONNER R D, CHOI-YIM H, JOHNSON W L. Mechanical properties of Zr57Nb5Al10Cu15.4Ni12.6 metallic glass matrix particulate composites [J]. Journal of Materials Research, 1999, 14(8): 3292–3297. DOI: 10.1557/JMR.1999.0445.
|
[8] |
CHOI-YIM H, SCHROERS J, JOHNSON W L. Microstructures and mechanical properties of tungsten wire/particle reinforced Zr57Nb5Al10Cu15.4Ni12.6 metallic glass matrix composites [J]. Applied Physics Letters, 2002, 80(11): 1906–1908. DOI: 10.1063/1.1459766.
|
[9] |
邱克强, 任英磊. 钨颗粒增强大块非晶复合材料 [J]. 稀有金属材料与工程, 2006, 35(1): 66–69. DOI: 10.3321/j.issn:1002-185X.2006.01.017.
QIU K Q, REN Y L. Tungsten particulate reinforced Zr based bulk metallic glass composites [J]. Rare Metal Materials and Engineering, 2006, 35(1): 66–69. DOI: 10.3321/j.issn:1002-185X.2006.01.017.
|
[10] |
杨旭, 雷济旭, 路庆伟, 等. 钨粉/锆基非晶复合材料制备工艺研究 [J]. 天津冶金, 2016(5): 30–33. DOI: 10.3969/j.issn.1006-110X.2016.05.009.
YANG X, LEI J X, LU Q W, et al. Study on preparation process of tungsten powder/zirconium based amorphous composite [J]. Tianjin Metallurgy, 2016(5): 30–33. DOI: 10.3969/j.issn.1006-110X.2016.05.009.
|
[11] |
张云峰, 罗兴柏, 施冬梅, 等. W骨架/Zr基非晶合金复合材料细观胞元重构 [J]. 稀有金属材料与工程, 2019, 48(1): 137–142.
ZHANG Y F, LUO X B, SHI D M, et al. Reconstruction of meso-cells of Zr-based metallic glass reinforced porous W matrix composite [J]. Rare Metal Materials and Engineering, 2019, 48(1): 137–142.
|
[12] |
黄正祥, 祖旭东. 终点效应[M]. 北京: 科学出版社, 2014: 111−118.
|
[13] |
辛甜, 韩庆. 钢破片侵彻靶板弹道极限速度研究 [J]. 科学技术与工程, 2012, 12(2): 264–268. DOI: 10.3969/j.issn.1671-1815.2012.02.004.
XIN T, HAN Q. Research on ballistic limit velocity of steel fragments penetrating target [J]. Science Technology and Engineering, 2012, 12(2): 264–268. DOI: 10.3969/j.issn.1671-1815.2012.02.004.
|
[14] |
李向东, 杜忠华. 目标易损性[M]. 北京: 北京理工大学出版社, 2013: 104−105.
|