Progress in structural impact dynamics during 2010−2020

YU Tongxi; ZHU Ling; XU Jun

doi:10.11883/bzycj-2021-0113

[1]

QIU X M, YU T X. Some topics in recent advances and applications of structural impact dynamics [J]. Applied Mechanics Reviews, 2011, 64(3): 030801. DOI: 10.1115/1.4005571.

[2]

朱建士, 胡晓棉, 王裴, 等. 爆炸与冲击动力学若干问题研究进展 [J]. 力学进展, 2010, 40(4): 400–423. DOI: 10.6052/1000-0992-2010-4-j2009-144.

ZHU J S, HU X M, WANG P, et al. A review on research progress in explosion mechanics and impact dynamics [J]. Advances in Mechanics, 2010, 40(4): 400–423. DOI: 10.6052/1000-0992-2010-4-j2009-144.

[3]

JONES N. Structural impact [M]. New York: Cambridge University Press, 2011.

[4]

STRONGE W J, YU T X. Dynamic models for structural plasticity [M]. London: Springer Science and Business Media, 2012.

[5]

余同希, 邱信明. 冲击动力学 [M]. 北京: 清华大学出版社, 2011.

[6]

JOHNSON W. Impact strength of materials [M]. London: Hodder Arnold, 1983.

[7]

BAROUTAJI A, SAJJIA M, OLABI A G. On the crashworthiness performance of thin-walled energy absorbers: recent advances and future developments [J]. Thin-Walled Structures, 2017, 118: 137–163. DOI: 10.1016/j.tws.2017.05.018.

[8]

余同希, 卢国兴, 张雄. 能量吸收: 结构与材料的力学行为和塑性分析 [M]. 北京: 科学出版社, 2019.

[9]

YANG X F, MA J X, WEN D S, et al. Crashworthy design and energy absorption mechanisms for helicopter structures: a systematic literature review [J]. Progress in Aerospace Sciences, 2020, 114: 100618. DOI: 10.1016/j.paerosci.2020.100618.

[10]

刘小川, 王彬文, 白春玉, 等. 航空结构冲击动力学技术的发展与展望 [J]. 航空科学技术, 2020, 31(3): 1–14. DOI: 10.19452/j.issn1007-5453.2020.03.001.

LIU X C, WANG B W, BAI C Y, et al. Progress and prospect of aviation structure impact dynamics [J]. Aeronautical Science and Technology, 2020, 31(3): 1–14. DOI: 10.19452/j.issn1007-5453.2020.03.001.

[11]

PHAM T M, CHEN W S, HAO H. Review on impact response of reinforced concrete beams: contemporary understanding and unsolved problems [J]. Advances in Structural Engineering, 2021, 24(10). DOI: 10.1177/1369433221997716.

[12]

SYMONDS P S, MENTEL T J. Impulsive loading of plastic beams with axial constraints [J]. Journal of the Mechanics and Physics of Solids, 1958, 6(3): 186–202. DOI: 10.1016/0022-5096(58)90025-5.

[13]

KOMAROV K L, NEMIROVSKII Y V. Dynamic behavior of rigid-plastic rectangular plates [J]. Soviet Applied Mechanics, 1985, 21(7): 683–690. DOI: 10.1007/BF00888115.

[14]

MARTIN J B, SYMONDS P S. Mode approximations for impulsively-loaded rigid-plastic structures [J]. Journal of the Engineering Mechanics Division, 1966, 92(5): 43–66. DOI: 10.1061/JMCEA3.0000787.

[15]

NURICK G N, MARTIN J B. Deformation of thin plates subjected to impulsive loading: a review: Part Ⅰ: theoretical considerations [J]. International Journal of Impact Engineering, 1989, 8(2): 159–170. DOI: 10.1016/0734-743X(89)90014-6.

[16]

NURICK G N, MARTIN J B. Deformation of thin plates subjected to impulsive loading: a review: Part Ⅱ: experimental studies [J]. International Journal of Impact Engineering, 1989, 8(2): 171–186. DOI: 10.1016/0734-743X(89)90015-8.

[17]

JONES N. Dynamic inelastic response of strain rate sensitive ductile plates due to large impact, dynamic pressure and explosive loadings [J]. International Journal of Impact Engineering, 2014, 74: 3–15. DOI: 10.1016/j.ijimpeng.2013.05.003.

[18]

JONES N. Slamming damage [J]. Journal of Ship Research, 1973, 17(2): 80–86. DOI: 10.5957/jsr.1973.17.2.80.

[19]

SHEN W Q, JONES N. The pseudo-shakedown of beams and plates when subjected to repeated dynamic loads [J]. Journal of Applied Mechanics, 1992, 59(1): 168–175. DOI: 10.1115/1.2899423.

[20]

ZHAO Y P, YU T X, FANG J. Large dynamic plastic deflection of a simply supported beam subjected to rectangular pressure pulse [J]. Archive of Applied Mechanics, 1994, 64(3): 223–232. DOI: 10.1007/BF00806819.

[21]

ZHAO Y P, YU T X, FANG J. Saturation impulses for dynamically loaded structures with finite-deflections [J]. Structural Engineering and Mechanics, 1995, 3(6): 583–592. DOI: 10.12989/sem.1995.3.6.583.

[22]

赵亚溥. 冲击载荷下结构塑性动力响应与失效的若干问题研究 [D]. 北京: 北京大学, 1994.

[23]

ZHU L, YU T X. Saturated impulse for pulse-loaded elastic-plastic square plates [J]. International Journal of Solids and Structures, 1997, 34(14): 1709–1718. DOI: 10.1016/S0020-7683(96)00111-4.

[24]

席丰, 杨嘉陵. 强脉冲载荷作用下弹-塑性薄圆板的大挠度动力响应 [J]. 爆炸与冲击, 2000, 20(4): 379–384.

XI F, YANG J L. Dynamic response analysis of elastic-plastic thin circular plates under impulse loading with consideration of large deflection [J]. Explosion and Shock Waves, 2000, 20(4): 379–384.

[25]

席丰, 张云. 脉冲载荷作用下钢梁动力响应及反常行为的应变率效应 [J]. 爆炸与冲击, 2012, 32(1): 34–42. DOI: 10.11883/1001-1455(2012)01-0034-09.

XI F, ZHANG Y. The effects of strain rate on the dynamic response and abnormal behavior of steel beams under pulse loading [J]. Explosion and Shock Waves, 2012, 32(1): 34–42. DOI: 10.11883/1001-1455(2012)01-0034-09.

[26]

ZHU L, BAI X Y, YU T X. The saturated impulse of fully clamped square plates subjected to linearly decaying pressure pulse [J]. International Journal of Impact Engineering, 2017, 110: 198–207. DOI: 10.1016/j.ijimpeng.2016.12.012.

[27]

BAI X Y, ZHU L, YU T X. Saturated impulse for pulse-loaded rectangular plates with various boundary conditions [J]. Thin-Walled Structures, 2017, 119: 166–177. DOI: 10.1016/j.tws.2017.03.030.

[28]

白雪玉. 船体板在脉冲载荷下的饱和冲量研究 [D]. 武汉: 武汉理工大学, 2018.

[29]

BAI X Y, ZHU L, YU T X. Saturated impulse for fully clamped square plates under blast loading [J]. International Journal of Mechanical Sciences, 2018, 146−147: 417–431. DOI: 10.1016/j.ijmecsci.2017.08.047.

[30]

TIAN L R, CHEN F L, ZHU L, et al. Saturated analysis of pulse-loaded beams based on Membrane Factor Method [J]. International Journal of Impact Engineering, 2019, 131: 17–26. DOI: 10.1016/j.ijimpeng.2019.04.021.

[31]

TIAN L R, CHEN F L, ZHU L, et al. Large deformation of square plates under pulse loading by combined saturation analysis and membrane factor methods [J]. International Journal of Impact Engineering, 2020, 140: 103546. DOI: 10.1016/j.ijimpeng.2020.103546.

[32]

ZHU L, HE X, YU T X, et al. Scaling effect on saturated impulse for square plates under rectangular pulse loading [C]// Proceedings of the ASME 35th International Conference on Ocean, Offshore and Arctic Engineering. Busan: ASME, 2016. DOI: 10.1115/OMAE2016-54366.

[33]

HE X, ZHU L, CHEN F L, et al. Saturated impulse of pulse loaded square plates made of steels with various yield stresses [C]// Proceedings of the 27th International Ocean and Polar Engineering Conference. San Francisco: International Society of Offshore and Polar Engineers, 2017.

[34]

ZHU L, HE X, CHEN F L, et al. Effects of the strain rate sensitivity and strain hardening on the saturated impulse of plates [J]. Latin American Journal of Solids and Structures, 2017, 14(7): 1273–1292. DOI: 10.1590/1679-78253664.

[35]

JONES N. A theoretical study of the dynamic plastic behavior of beams and plates with finite-deflections [J]. International Journal of Solids and Structures, 1971, 7(8): 1007–1029. DOI: 10.1016/0020-7683(71)90078-3.

[36]

YU T X, STRONGE W J. Large deflections of a rigid-plastic beam-on-foundation from impact [J]. International Journal of Impact Engineering, 1990, 9(1): 115–126. DOI: 10.1016/0734-743X(90)90025-Q.

[37]

余同希, 陈发良. 用“膜力因子法”分析简支刚塑性圆板的大挠度动力响应 [J]. 力学学报, 1990, 22(5): 555–565. DOI: 10.6052/0459-1879-1990-5-1995-984.

YU T X, CHEN F L. Analysis of the large deflection dynamic response of simply-supported circular plates by the “membrane factor method” [J]. Acta Mechanica Sinica, 1990, 22(5): 555–565. DOI: 10.6052/0459-1879-1990-5-1995-984.

[38]

陈发良, 余同希. 正多边形板的塑性动力响应: 小挠度分析和大挠度分析 [J]. 爆炸与冲击, 1991, 11(2): 106–116.

CHEN F L, YU T X. Dynamic plastic response of regular polygonal plates [J]. Explosion and Shock Waves, 1991, 11(2): 106–116.

[39]

YU T X, CHEN F L. The large deflection dynamic plastic response of rectangular plates [J]. International Journal of Impact Engineering, 1992, 12(4): 605–616. DOI: 10.1016/0734-743X(92)90261-Q.

[40]

颜丰, 刘敬喜. 爆炸载荷下固支矩形板的大挠度塑性动力响应 [J]. 中国舰船研究, 2013, 8(1): 47–53. DOI: 10.3969/j.issn.1673-3185.2013.01.008.

YAN F, LIU J X. The large deflection dynamic plastic response of rectangular plates subjected to blast load [J]. Chinese Journal of Ship Research, 2013, 8(1): 47–53. DOI: 10.3969/j.issn.1673-3185.2013.01.008.

[41]

王鑫. 爆炸作用下钢筋混凝土板的塑性动力响应 [D]. 哈尔滨: 哈尔滨工程大学, 2014. DOI: 10.7666/d.D595676.

[42]

王喆. 加筋板结构爆炸冲击下塑性动力响应分析 [D]. 哈尔滨: 哈尔滨工程大学, 2014. DOI: 10.7666/d.D595610.

[43]

郭君, 张文启, 郭建军, 等. 水下爆炸冲击波作用下单向加筋板的大挠度塑性变形 [J]. 兵工学报, 2015, 36(S1): 163–168.

GUO J, ZHANG W Q, GUO J J, et al. Large plastic deformation of stiffened plate subjected to blast load [J]. Acta Armamentarii, 2015, 36(S1): 163–168.

[44]

QIN Q H, WANG T J, ZHAO S Z. Large deflections of metallic sandwich and monolithic beams under locally impulsive loading [J]. International Journal of Mechanical Sciences, 2009, 51(11−12): 752–773. DOI: 10.1016/j.ijmecsci.2009.08.008.

[45]

QIN Q H, WANG T J. A theoretical analysis of the dynamic response of metallic sandwich beam under impulsive loading [J]. European Journal of Mechanics: A/Solids, 2009, 28(5): 1014–1025. DOI: 10.1016/j.euromechsol.2009.04.002.

[46]

QIN Q H, XIANG C P, ZHANG J X, et al. On low-velocity impact response of metal foam core sandwich beam: a dual beam model [J]. Composite Structures, 2017, 176: 1039–1049. DOI: 10.1016/j.compstruct.2017.06.038.

[47]

SYMONDS P S. Dynamic load characteristics in plastic bending of beams [J]. Journal of Applied Mechanics, 1953, 20(4): 475–481.

[48]

HODGE P G. The influence of blast characteristics on the final deformation of circular cylindrical shells [M]. Brooklyn: Department of Aeronautical Engineering, Polytechnic Institute of Brooklyn, 1954.

[49]

YOUNGDAHL C K. Correlation parameters for eliminating the effect of pulse shape on dynamic plastic deformation [J]. Journal of Applied Mechanics, 1970, 37(3): 744–752. DOI: 10.1115/1.3408605.

[50]

ZHU G, HUANG Y G, YU T X, et al. Estimation of the plastic structural response under impact [J]. International Journal of Impact Engineering, 1986, 4(4): 271–282. DOI: 10.1016/0734-743X(86)90018-7.

[51]

LI Q M, MENG H. Pulse loading shape effects on pressure-impulse diagram of an elastic-plastic, single-degree-of-freedom structural model [J]. International Journal of Mechanical Sciences, 2002, 44(9): 1985–1998. DOI: 10.1016/S0020-7403(02)00046-2.

[52]

朱凌, 田岚仁, 李德聪, 等. 饱和冲量及其等效方法在舱室内爆炸中的应用 [J]. 中国舰船研究, 2021, 16(2): 99–107. DOI: 10.19693/j.issn.1673-3185.01876.

ZHU L, TIAN L R, LI D C, et al. Saturated impulse and application of saturation equivalent method in cabin explosion [J]. Chinese Journal of Ship Research, 2021, 16(2): 99–107. DOI: 10.19693/j.issn.1673-3185.01876.

[53]

赵亚溥, 余同希, 方竞. 关于结构塑性动力失效若干问题的研究进展 [J]. 力学进展, 1995, 25(4): 549–561. DOI: 10.6052/1000-0992-1995-4-J1995-009.

ZHAO Y P, YU T X, FANG J. On the some advances in studies of structural dynamic plastic failure [J]. Advances in Mechanics, 1995, 25(4): 549–561. DOI: 10.6052/1000-0992-1995-4-J1995-009.

[54]

YU T X, CHEN F L. Failure of plastic structures under intense dynamic loading: modes, criteria and thresholds [J]. International Journal of Mechanical Sciences, 2000, 42(8): 1537–1554. DOI: 10.1016/S0020-7403(99)00089-2.

[55]

MENKES S B, OPAT H J. Broken beams [J]. Experimental Mechanics, 1973, 13(11): 480–486. DOI: 10.1007/BF02322734.

[56]

ZHU L. Transient deformation modes of square plates subjected to explosive loadings [J]. International Journal of Solids and Structures, 1996, 33(3): 301–314. DOI: 10.1016/0020-7683(95)00037-B.

[57]

NURICK G N, SHAVE G C. The deformation and tearing of thin square plates subjected to impulsive loads: an experimental study [J]. International Journal of Impact Engineering, 1996, 18(1): 99–116. DOI: 10.1016/0734-743X(95)00018-2.

[58]

RAMAJEYATHILAGAM K, VENDHAN C P. Deformation and rupture of thin rectangular plates subjected to underwater shock [J]. International Journal of Impact Engineering, 2004, 30(6): 699–719. DOI: 10.1016/j.ijimpeng.2003.01.001.

[59]

JACOB N, YUEN S C K, NURICK G N, et al. Scaling aspects of quadrangular plates subjected to localised blast loads: experiments and predictions [J]. International Journal of Impact Engineering, 2004, 30(8−9): 1179–1208. DOI: 10.1016/j.ijimpeng.2004.03.012.

[60]

JACOB N, NURICK G N, LANGDON G S. The effect of stand-off distance on the failure of fully clamped circular mild steel plates subjected to blast loads [J]. Engineering Structures, 2007, 29(10): 2723–2736. DOI: 10.1016/j.engstruct.2007.01.021.

[61]

YUEN S C K, NURICK G N. Experimental and numerical studies on the response of quadrangular stiffened plates: Part Ⅰ: subjected to uniform blast load [J]. International Journal of Impact Engineering, 2005, 31(1): 55–83. DOI: 10.1016/j.ijimpeng.2003.09.048.

[62]

LANGDON G S,YUEN S C K, NURICK G N. Experimental and numerical studies on the response of quadrangular stiffened plates: Part Ⅱ: localised blast loading [J]. International Journal of Impact Engineering, 2005, 31(1): 85–111. DOI: 10.1016/j.ijimpeng.2003.09.050.

[63]

ZHAO N, YAO S J, ZHANG D, et al. Experimental and numerical studies on the dynamic response of stiffened plates under confined blast loads [J]. Thin-Walled Structures, 2020, 154: 106839. DOI: 10.1016/j.tws.2020.106839.

[64]

牟金磊, 朱锡, 张振华, 等. 水下爆炸载荷作用下加筋板变形及开裂试验研究 [J]. 振动与冲击, 2008, 27(1): 57–60. DOI: 10.3969/j.issn.1000-3835.2008.01.013.

MU J L, ZHU X, ZHANG Z H, et al. Experimental study on deformation and rupture of stiffened plates subjected to underwater shock [J]. Journal of Vibration and Shock, 2008, 27(1): 57–60. DOI: 10.3969/j.issn.1000-3835.2008.01.013.

[65]

BONORCHIS D, NURICK G N. The analysis and simulation of welded stiffener plates subjected to localised blast loading [J]. International Journal of Impact Engineering, 2010, 37(3): 260–273. DOI: 10.1016/j.ijimpeng.2009.08.004.

[66]

YUAN Y, TAN P J. Deformation and failure of rectangular plates subjected to impulsive loadings [J]. International Journal of Impact Engineering, 2013, 59: 46–59. DOI: 10.1016/j.ijimpeng.2013.03.009.

[67]

MICALLEF K, FALLAH A S, POPE D J, et al. Dynamic performance of simply supported rigid plastic circular thick steel plates subjected to localized blast loading [J]. Journal of Engineering Mechanics, 2014, 140(1): 159–171. DOI: 10.1061/(ASCE)EM.1943-7889.0000645.

[68]

MEHREGANIAN N, FALLAH A S, LOUCA L A. Plastic dynamic response of simply supported thick square plates subject to localised blast loading [J]. International Journal of Impact Engineering, 2019, 126: 85–100. DOI: 10.1016/j.ijimpeng.2018.12.010.

[69]

AUNE V, VALSAMOS G, CASADEI F, et al. Numerical study on the structural response of blast-loaded thin aluminium and steel plates [J]. International Journal of Impact Engineering, 2017, 99: 131–144. DOI: 10.1016/j.ijimpeng.2016.08.010.

[70]

YUAN Y, TAN P J. On large deformation, damage and failure of ductile plates to blast loading [J]. International Journal of Impact Engineering, 2019, 132: 103330. DOI: 10.1016/j.ijimpeng.2019.103330.

[71]

纪冲, 徐全军, 万文乾, 等. 钢质圆柱壳在侧向爆炸荷载下的动力响应 [J]. 爆炸与冲击, 2014, 34(2): 137–144. DOI: 10.11883/1001-1455(2014)02-0137-08.

JI C, XU Q J, WAN W Q, et al. Dynamic responses of steel cylindrical shells under lateral explosion loading [J]. Explosion and Shock Waves, 2014, 34(2): 137–144. DOI: 10.11883/1001-1455(2014)02-0137-08.

[72]

WIERZBICKI T, BAO Y B, LEE Y W, et al. Calibration and evaluation of seven fracture models [J]. International Journal of Mechanical Sciences, 2005, 47(4−5): 719–743. DOI: 10.1016/j.ijmecsci.2005.03.003.

[73]

JOHNSON G R, COOK W H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures [J]. Engineering Fracture Mechanics, 1985, 21(1): 31–48. DOI: 10.1016/0013-7944(85)90052-9.

[74]

ZHU L, ATKINS A G. Failure criteria for ship collision and grounding [C]//Proceedings of the 7th International Symposium on Practical Design of Ships and Mobile Units. The Hague: Elsevier, 1998.

[75]

RUDRAPATNA N S, VAZIRI R, OLSON M D. Deformation and failure of blast-loaded stiffened plates [J]. International Journal of Impact Engineering, 2000, 24(5): 457–474. DOI: 10.1016/S0734-743X(99)00172-4.

[76]

BAO Y B, WIERZBICKI T. A comparative study on various ductile crack formation criteria [J]. Journal of Engineering Materials and Technology, 2004, 126(3): 314–324. DOI: 10.1115/1.1755244.

[77]

BAI Y L, WIERZBICKI T. Application of extended Mohr-Coulomb criterion to ductile fracture [J]. International Journal of Fracture, 2010, 161(1): 1. DOI: 10.1007/s10704-009-9422-8.

[78]

STORHEIM M, ALSOS H S, HOPPERSTAD O S, et al. A damage-based failure model for coarsely meshed shell structures [J]. International Journal of Impact Engineering, 2015, 83: 59–75. DOI: 10.1016/j.ijimpeng.2015.04.009.

[79]

YANG L, PENG Z L, WANG D Y. Experimental and numerical investigation of material failure criterion with high-strength hull steel under biaxial stress [J]. Ocean Engineering, 2018, 155: 24–41. DOI: 10.1016/j.oceaneng.2018.02.022.

[80]

WANG Z P, HU Z Q, LIU K, et al. Application of a material model based on the Johnson-Cook and Gurson-Tvergaard-Needleman model in ship collision and grounding simulations [J]. Ocean Engineering, 2020, 205: 106768. DOI: 10.1016/j.oceaneng.2019.106768.

[81]

MORIELLO D S, BOSI F, TORII R, et al. Failure and detachment path of impulsively loaded plates [J]. Thin-Walled Structures, 2020, 155: 106871. DOI: 10.1016/j.tws.2020.106871.

[82]

NEEDLEMAN A, TVERGAARD V. An analysis of ductile rupture in notched bars [J]. Journal of the Mechanics and Physics of Solids, 1984, 32(6): 461–490. DOI: 10.1016/0022-5096(84)90031-0.

[83]

JARRETT D E. Derivation of the British explosives safety distances [J]. Annals of the New York Academy of Sciences, 1968, 152(1): 18–35. DOI: 10.1111/j.1749-6632.1968.tb11963.x.

[84]

李天华. 爆炸荷载下钢筋混凝土板的动态响应及损伤评估 [D]. 西安: 长安大学, 2012. DOI: 10.7666/d.D234344.

[85]

PARLIN N J, DAVIDS W G, NAGY E, et al. Dynamic response of lightweight wood-based flexible wall panels to blast and impulse loading [J]. Construction and Building Materials, 2014, 50: 237–245. DOI: 10.1016/j.conbuildmat.2013.09.046.

[86]

STOLZ A, FISCHER K, ROLLER C, et al. Dynamic bearing capacity of ductile concrete plates under blast loading [J]. International Journal of Impact Engineering, 2014, 69: 25–38. DOI: 10.1016/j.ijimpeng.2014.02.008.

[87]

COTSOVOS D M. A simplified approach for assessing the load-carrying capacity of reinforced concrete beams under concentrated load applied at high rates [J]. International Journal of Impact Engineering, 2010, 37(8): 907–917. DOI: 10.1016/j.ijimpeng.2010.01.005.

[88]

COTSOVOS D M, PAVLOVIĆ M N. Modelling of RC beams under impact loading [J]. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 2012, 165(2): 77–94. DOI: 10.1680/stbu.2012.165.2.77.

[89]

汪维. 钢筋混凝土构件在爆炸载荷作用下的毁伤效应及评估方法研究 [D]. 长沙: 国防科学技术大学, 2012.

[90]

师吉浩, 朱渊, 陈国明, 等. 基于p-I模型的爆炸载荷下波纹板防爆墙抗爆能力评估 [J]. 振动与冲击, 2017, 36(6): 188–195. DOI: 10.13465/j.cnki.jvs.2017.06.029.

SHI J H, ZHU Y, CHEN G M, et al. Assessment of blast resistance capacities of corrugated blast walls based on the p-I Model [J]. Journal of Vibration and Shock, 2017, 36(6): 188–195. DOI: 10.13465/j.cnki.jvs.2017.06.029.

[91]

丁阳, 陈晔, 师燕超. 室内爆炸与火灾联合作用下约束钢柱损伤评估 [J]. 振动与冲击, 2017, 36(5): 79–86. DOI: 10.13465/j.cnki.jvs.2017.05.013.

DING Y, CHEN Y, SHI Y C. Damage evaluation of a restrained steel column subjected to indoor blast and fire [J]. Journal of Vibration and Shock, 2017, 36(5): 79–86. DOI: 10.13465/j.cnki.jvs.2017.05.013.

[92]

陈赟, 冯顺山, 王芳, 等. 爆炸冲击波作用下的金属板损伤p-I图仿真 [J]. 科技导报, 2010, 28(18): 52–56.

CHEN Y, FENG S S, WANG F, et al. Numerical methods of pressure-impulse diagrams for damages of plates under blast loads [J]. Science and Technology Review, 2010, 28(18): 52–56.

[93]

ABRAHAMSON G R, LINDBERG H E. Peak load-impulse characterization of critical pulse loads in structural dynamics [J]. Nuclear Engineering and Design, 1976, 37(1): 35–46. DOI: 10.1016/0029-5493(76)90051-0.

[94]

LI Q M, MENG H. Pressure-impulse diagram for blast loads based on dimensional analysis and single-degree-of-freedom model [J]. Journal of Engineering Mechanics, 2002, 128(1): 87–92. DOI: 10.1061/(ASCE)0733-9399(2002)128:1(87).

[95]

FALLAH A S, NWANKWO E, LOUCA L A. Pressure-impulse diagrams for blast loaded continuous beams based on dimensional analysis [J]. Journal of Applied Mechanics, 2013, 80(5): 11. DOI: 10.1115/1.4023639.

[96]

DRAGOS J, WU C Q. A new general approach to derive normalised pressure impulse curves [J]. International Journal of Impact Engineering, 2013, 62: 1–12. DOI: 10.1016/j.ijimpeng.2013.05.005.

[97]

DRAGOS J, WU C Q. Single-degree-of-freedom approach to incorporate axial load effects on pressure impulse curves for steel columns [J]. Journal of Engineering Mechanics, 2015, 141(1): 04014098. DOI: 10.1061/(ASCE)EM.1943-7889.0000818.

[98]

TSAI Y K. Energy based load-impulse diagrams for structural elements [D]. Gainesville: University of Florida, 2015.

[99]

TSAI Y K, KRAUTHAMMER T. Energy based load-impulse diagrams [J]. Engineering Structures, 2017, 149: 64–77. DOI: 10.1016/j.engstruct.2016.10.042.

[100]

TSAI Y K, KRAUTHAMMER T. Energy based load-impulse diagrams with multiple failure modes for blast-loaded reinforced concrete structural elements [J]. Engineering Failure Analysis, 2019, 104: 830–843. DOI: 10.1016/j.engfailanal.2019.06.023.

[101]

陈俊杰, 高康华, 孙敖. 爆炸条件下结构超压-冲量曲线简化计算研究 [J]. 振动与冲击, 2016, 35(13): 224–232. DOI: 10.13465/j.cnki.jvs.2016.13.036.

CHEN J J, GAO K H, SUN A. Simplified calculation method for pressure-impulse curve of a structure under blast load [J]. Journal of Vibration and Shock, 2016, 35(13): 224–232. DOI: 10.13465/j.cnki.jvs.2016.13.036.

[102]

潘建军, 陈万祥, 郭志昆, 等. 基于p-I曲线的火灾后钢管RPC柱抗爆损伤评估方法 [J]. 防护工程, 2018, 40(5): 16–26.

PAN J J, CHEN W X, GUO Z K, et al. Evaluation of fire and blast-damaged RPC-FST column based on pressure-impulse diagram [J]. Protective Engineering, 2018, 40(5): 16–26.

[103]

SHI Y J. Characterization with scaling techniques on response energy of a single degree of freedom system subject to blast loading [J]. International Journal of Impact Engineering, 2021, 148: 103764. DOI: 10.1016/j.ijimpeng.2020.103764.

[104]

汪维, 张舵, 卢芳云, 等. 爆炸荷载作用下钢筋混凝土板跨高比对两种失效模式p-I图的影响 [J]. 防护工程, 2015, 37(1): 44–49.

WANG W, ZHANG D, LU F Y, et al. The influence of span length to height ratio of reinforced concrete slabs on pressure-impulse diagram with multiple failure modes under blast loading [J]. Protective Engineering, 2015, 37(1): 44–49.

[105]

YU R Q, ZHANG D D, CHEN L, et al. Non-dimensional pressure-impulse diagrams for blast-loaded reinforced concrete beam columns referred to different failure modes [J]. Advances in Structural Engineering, 2018, 21(14): 2114–2129. DOI: 10.1177/1369433218768085.

[106]

YU R Q, CHEN L, FANG Q, et al. Generation of pressure-impulse diagrams for failure modes of RC columns subjected to blast loads [J]. Engineering Failure Analysis, 2019, 100: 520–535. DOI: 10.1016/j.engfailanal.2019.02.001.

[107]

YUAN Y, ZHU L, BAI X Y, et al. Pressure-impulse diagrams for elastoplastic beams subjected to pulse-pressure loading [J]. International Journal of Solids and Structures, 2019, 160: 148–157. DOI: 10.1016/j.ijsolstr.2018.10.021.

[108]

CHERNIN L, VILNAY M, SHUFRIN I, et al. Pressure-impulse diagram method: a fundamental review [J]. Proceedings of the Institution of Civil Engineers:Engineering and Computational Mechanics, 2019, 172(2): 55–69. DOI: 10.1680/jencm.17.00017.

[109]

YUHARA T. Fundamental study of wave impact loads on ship bow: 3rd report: simulation of bow damage [J]. Journal of the Society of Naval Architects of Japan, 1975(137): 240–245.

[110]

STOFFEL M. Limit states of elastic-viscoplastic plate deformations caused by repeated shock wave-loadings: Part 1: experimental observation [J]. Mechanics Research Communications, 2006, 33(6): 771–774. DOI: 10.1016/j.mechrescom.2006.03.004.

[111]

STOFFEL M. Limit states of elastic-viscoplastic plate deformations caused by repeated shock wave-loadings: Part 2: theoretical modelling [J]. Mechanics Research Communications, 2006, 33(6): 775–779. DOI: 10.1016/j.mechrescom.2006.03.005.

[112]

SHIN H, SEO B, CHO S R. Experimental investigation of slamming impact acted on flat bottom bodies and cumulative damage [J]. International Journal of Naval Architecture and Ocean Engineering, 2018, 10(3): 294–306. DOI: 10.1016/j.ijnaoe.2017.06.004.

[113]

HENCHIE T F, YUEN S C K, NURICK G N, et al. The response of circular plates to repeated uniform blast loads: an experimental and numerical study [J]. International Journal of Impact Engineering, 2014, 74: 36–45. DOI: 10.1016/j.ijimpeng.2014.02.021.

[114]

KUMAR M, GOEL M D, MATSAGAR V A, et al. Response of semi-buried structures subjected to multiple blast loading considering soil-structure interaction [J]. Indian Geotechnical Journal, 2015, 45(3): 243–253. DOI: 10.1007/s40098-014-0143-1.

[115]

ZHOU Y, JI C, LONG Y, et al. Experimental studies on the deformation and damage of steel cylindrical shells subjected to double-explosion loadings [J]. Thin-Walled Structures, 2018, 127: 469–482. DOI: 10.1016/j.tws.2018.02.019.

[116]

YUEN S C K, BUTLER A, BORNSTEIN H, et al. The influence of orientation of blast loading on quadrangular plates [J]. Thin-Walled Structures, 2018, 131: 827–837. DOI: 10.1016/j.tws.2018.08.004.

[117]

CHENG L Y, JI C, GAO F Y, et al. Deformation and damage of liquid-filled cylindrical shell composite structures subjected to repeated explosion loads: experimental and numerical study [J]. Composite Structures, 2019, 220: 386–401. DOI: 10.1016/j.compstruct.2019.03.083.

[118]

REZASEFAT M, MOSTOFI T M, OZBAKKALOGLU T. Repeated localized impulsive loading on monolithic and multi-layered metallic plates [J]. Thin-Walled Structures, 2019, 144: 106332. DOI: 10.1016/j.tws.2019.106332.

[119]

ZIYA-SHAMAMI M, BABAEI H, MOSTOFI T M, et al. Structural response of monolithic and multi-layered circular metallic plates under repeated uniformly distributed impulsive loading: an experimental study [J]. Thin-Walled Structures, 2020, 157: 107024. DOI: 10.1016/j.tws.2020.107024.

[120]

ZHU L. Dynamic inelastic behaviour of ship plates in collision [D]. Glasgow: University of Glasgow, 1990.

[121]

ZHU L, FAULKNER D. Damage estimate for plating of ships and platforms under repeated impacts [J]. Marine Structures, 1996, 9(7): 697–720. DOI: 10.1016/0951-8339(95)00018-6.

[122]

HUANG Z Q, CHEN Q S, ZHANG W T. Pseudo-shakedown in the collision mechanics of ships [J]. International Journal of Impact Engineering, 2000, 24(1): 19–31. DOI: 10.1016/S0734-743X(99)00041-X.

[123]

JONES N. Pseudo-shakedown phenomenon for the mass impact loading of plating [J]. International Journal of Impact Engineering, 2014, 65: 33–39. DOI: 10.1016/j.ijimpeng.2013.10.009.

[124]

ZHU L. Modeling of repeated impacts on ships and offshore platforms [C]//Proceedings of the International Conference on Safety and Reliability of Ship, Offshore and Subsea Structures. Glasgow, 2014.

[125]

DUAN F J, LIU J X, WANG G, et al. Dynamic behaviour of aluminium alloy plates with surface cracks subjected to repeated impacts [J]. Ships and Offshore Structures, 2019, 14(5): 478–491. DOI: 10.1080/17445302.2018.1507088.

[126]

CHO S R, TRUONG D D, SHIN H K. Repeated lateral impacts on steel beams at room and sub-zero temperatures [J]. International Journal of Impact Engineering, 2014, 72: 75–84. DOI: 10.1016/j.ijimpeng.2014.05.010.

[127]

TRUONG D D, JUNG H J, SHIN H K, et al. Response of low-temperature steel beams subjected to single and repeated lateral impacts [J]. International Journal of Naval Architecture and Ocean Engineering, 2018, 10(6): 670–682. DOI: 10.1016/j.ijnaoe.2017.10.002.

[128]

黄震球. 船舶结构力学中的“伪安定”问题 [J]. 上海交通大学学报, 1998, 32(11): 51–55. DOI: 10.16183/j.cnki.jsjtu.1998.11.011.

HUANG Z Q. Pseudo shakedown in structural mechanics of ships [J]. Journal of Shanghai Jiaotong University, 1998, 32(11): 51–55. DOI: 10.16183/j.cnki.jsjtu.1998.11.011.

[129]

TRUONG D D, SHIN H K, CHO S R. Repeated lateral impacts on steel grillage structures at room and sub-zero temperatures [J]. International Journal of Impact Engineering, 2018, 113: 40–53. DOI: 10.1016/j.ijimpeng.2017.11.007.

[130]

ZHU L, SHI S Y, JONES N. Dynamic response of stiffened plates under repeated impacts [J]. International Journal of Impact Engineering, 2018, 117: 113–122. DOI: 10.1016/j.ijimpeng.2018.03.006.

[131]

HAO Q M, YIN X C, QIAN P B, et al. Transient impact analysis of elastic-plastic beam with strain-rate sensitivity [J]. International Journal of Impact Engineering, 2021, 153: 103865. DOI: 10.1016/j.ijimpeng.2021.103865.

[132]

HE X, SOARES C G. Experimental study on the dynamic behavior of beams under repeated impacts [J]. International Journal of Impact Engineering, 2021, 147: 103724. DOI: 10.1016/j.ijimpeng.2020.103724.

[133]

OWENS R H. Plastic deformations of a free ring under concentrated dynamic loading [R]. Providence, RI: Division of Applied Mathematics, Brown University, 1954.

[134]

HASHMI S J, AL-HASSANI S T S, JOHNSON W. Dynamic plastic deformation of rings under impulsive load [J]. International Journal of Mechanical Sciences, 1972, 14(12): 823–826. DOI: 10.1016/0020-7403(72)90043-4.

[135]

WANG H B, YANG J L, LIU H. Lateral crushing of circular rings under wedge impact [J]. International Journal of Applied Mechanics, 2016, 8(3): 1650031. DOI: 10.1142/S1758825116500319.

[136]

FAN Z H, SHEN J H, LU G X, et al. Dynamic lateral crushing of empty and sandwich tubes [J]. International Journal of Impact Engineering, 2013, 53: 3–16. DOI: 10.1016/j.ijimpeng.2012.09.006.

[137]

WANG H B, YANG J L, LIU H, et al. Internally nested circular tube system subjected to lateral impact loading [J]. Thin-Walled Structures, 2015, 91: 72–81. DOI: 10.1016/j.tws.2015.02.014.

[138]

BAROUTAJI A, GILCHRIST M D, OLABI A G. Quasi-static, impact and energy absorption of internally nested tubes subjected to lateral loading [J]. Thin-Walled Structures, 2016, 98: 337–350. DOI: 10.1016/j.tws.2015.10.001.

[139]

YU Z L, XUE P, CHEN Z. Reprint of: nested tube system applicable to protective structures against blast shock [J]. International Journal of Impact Engineering, 2017, 105: 13–23. DOI: 10.1016/j.ijimpeng.2017.03.025.

[140]

VIRGIN L N, GILIBERTO J V, PLAUT R H. Deformation and vibration of compressed, nested, elastic rings on rigid base [J]. Thin-Walled Structures, 2018, 132: 167–175. DOI: 10.1016/j.tws.2018.08.015.

[141]

USTA F, TÜRKMEN H S. Experimental and numerical investigation of impact behavior of nested tubes with and without honeycomb filler [J]. Thin-Walled Structures, 2019, 143: 106256. DOI: 10.1016/j.tws.2019.106256.

[142]

SHABANI B, RAD S G, ALIJANI A, et al. Dynamic plastic behavior of single and nested rings under lateral impact [J]. Thin-Walled Structures, 2021, 160: 107373. DOI: 10.1016/j.tws.2020.107373.

[143]

REID S R, REDDY T Y. Experimental investigation of inertia effects in one-dimensional metal ring systems subjected to end impact: Ⅰ: fixed-ended systems [J]. International Journal of Impact Engineering, 1983, 1(1): 85–106. DOI: 10.1016/0734-743X(83)90014-3.

[144]

REID S R, BELL W W, BARR R A. Structural plastic shock model for one-dimensional ring systems [J]. International Journal of Impact Engineering, 1983, 1(2): 175–191. DOI: 10.1016/0734-743X(83)90005-2.

[145]

REID S R, BELL W W. Response of one-dimensional metal ring systems to end impact [C]//Institute of Physics Conference Series, 1984: 471-478.

[146]

GAO Z Y, YU T X, LU G. A study on type Ⅱ structures: Part Ⅰ: a modified one-dimensional mass-spring model [J]. International Journal of Impact Engineering, 2005, 31(7): 895–910. DOI: 10.1016/j.ijimpeng.2004.04.015.

[147]

GAO Z Y, YU T X, LU G. A study on type Ⅱ structures: Part Ⅱ: dynamic behavior of a chain of pre-bent plates [J]. International Journal of Impact Engineering, 2005, 31(7): 911–926. DOI: 10.1016/j.ijimpeng.2004.04.014.

[148]

YU T X, LU G, GAO Z Y, et al. Dynamic behaviour and energy absorption of 1D and 2D regularly packed cells [J]. International Journal of Vehicle Design, 2005, 37(2−3): 199–223. DOI: 10.1504/IJVD.2005.006657.

[149]

LIU K, ZHAO K, GAO Z Y, et al. Dynamic behavior of ring systems subjected to pulse loading [J]. International Journal of Impact Engineering, 2005, 31(10): 1209–1222. DOI: 10.1016/j.ijimpeng.2004.08.005.

[150]

GAO Z Y, YU T X. One-dimensional analysis on the dynamic response of cellular chains to pulse loading [J]. Proceedings of the Institution of Mechanical Engineers: Part C: Journal of Mechanical Engineering Science, 2006, 220(5): 679–689. DOI: 10.1243/09544062C07505.

[151]

SHIM V P W, LAN R, GUO Y B, et al. Elastic wave propagation in cellular systems: experiments on single rings and ring systems [J]. International Journal of Impact Engineering, 2007, 34(10): 1565–1584. DOI: 10.1016/j.ijimpeng.2006.08.007.

[152]

FLORENCE A L, GOODIER J N. Dynamic plastic buckling of cylindrical shells in sustained axial compressive flow [J]. Journal of Applied Mechanics, 1968, 35(1): 80–86. DOI: 10.1115/1.3601178.

[153]

ABRAMOWICZ W, JONES N. Dynamic axial crushing of circular tubes [J]. International Journal of Impact Engineering, 1984, 2(3): 263–281. DOI: 10.1016/0734-743X(84)90010-1.

[154]

GUPTA N K. Some aspects of axial collapse of cylindrical thin-walled tubes [J]. Thin-Walled Structures, 1998, 32(1−3): 111–126. DOI: 10.1016/S0263-8231(98)00029-9.

[155]

KARAGIOZOVA D, JONES N. Dynamic effects on buckling and energy absorption of cylindrical shells under axial impact [J]. Thin-Walled Structures, 2001, 39(7): 583–610. DOI: 10.1016/S0263-8231(01)00015-5.

[156]

KARAGIOZOVA D, JONES N. On dynamic buckling phenomena in axially loaded elastic-plastic cylindrical shells [J]. International Journal of Non-linear Mechanics, 2002, 37(7): 1223–1238. DOI: 10.1016/S0020-7462(01)00146-9.

[157]

KARAGIOZOVA D, JONES N. Influence of stress waves on the dynamic progressive and dynamic plastic buckling of cylindrical shells [J]. International Journal of Solids and Structures, 2001, 38(38−39): 6723–6749. DOI: 10.1016/S0020-7683(01)00111-1.

[158]

KARAGIOZOVA D, ALVES M. Transition from progressive buckling to global bending of circular shells under axial impact: Part Ⅰ: experimental and numerical observations [J]. International Journal of Solids and Structures, 2004, 41(5−6): 1565–1580. DOI: 10.1016/j.ijsolstr.2003.10.005.

[159]

KARAGIOZOVA D, JONES N. Dynamic buckling of elastic-plastic square tubes under axial impact: Ⅱ: structural response [J]. International Journal of Impact Engineering, 2004, 30(2): 167–192. DOI: 10.1016/S0734-743X(03)00062-9.

[160]

ABDUL-LATIF A, BALEH R. Dynamic biaxial plastic buckling of circular shells [J]. Journal of Applied Mechanics, 2008, 75(3): 31013. DOI: 10.1115/1.2839686.

[161]

WILLIAMS B W, SIMHA C H M, ABEDRABBO N, et al. Effect of anisotropy, kinematic hardening, and strain-rate sensitivity on the predicted axial crush response of hydroformed aluminium alloy tubes [J]. International Journal of Impact Engineering, 2010, 37(6): 652–661. DOI: 10.1016/J.IJIMPENG.2009.10.010.

[162]

RAJABIEHFARD R, DARVIZEH A, DARVIZEH M, et al. Theoretical and experimental analysis of elastic-plastic cylindrical shells under two types of axial impacts [J]. Thin-Walled Structures, 2016, 107: 315–326. DOI: 10.1016/j.tws.2015.12.014.

[163]

KULEYIN H, GÜMRÜK R. Pressure wave propagation in pressurized thin-walled circular tubes under axial impact [J]. International Journal of Impact Engineering, 2019, 130: 138–152. DOI: 10.1016/J.IJIMPENG.2019.04.015.

[164]

ZHANG X W, YU T X. Energy absorption of pressurized thin-walled circular tubes under axial crushing [J]. International Journal of Mechanical Sciences, 2009, 51(5): 335–349. DOI: 10.1016/j.ijmecsci.2009.03.002.

[165]

ZHANG X, ZHANG H, YANG C Y, et al. Static and dynamic axial crushing of self-locking multi-cell tubes [J]. International Journal of Impact Engineering, 2019, 127: 17–30. DOI: 10.1016/j.ijimpeng.2019.01.002.

[166]

BAMBACH M R. Behaviour and design of aluminium hollow sections subjected to transverse blast loads [J]. Thin-Walled Structures, 2008, 46(12): 1370–1381. DOI: 10.1016/j.tws.2008.03.010.

[167]

JAMA H H, NURICK G N, BAMBACH M R, et al. Steel square hollow sections subjected to transverse blast loads [J]. Thin-Walled Structures, 2012, 53: 109–122. DOI: 10.1016/j.tws.2012.01.007.

[168]

KARAGIOZOVA D, YU T X, LU G. Transverse blast loading of hollow beams with square cross-sections [J]. Thin-Walled Structures, 2013, 62: 169–178. DOI: 10.1016/j.tws.2012.09.004.

[169]

KARAGIOZOVA D, YU T X, LU G, et al. Response of a circular metallic hollow beam to an impulsive loading [J]. Thin-Walled Structures, 2014, 80: 80–90. DOI: 10.1016/j.tws.2014.02.021.

[170]

KARAGIOZOVA D M A. On the saturated impulse for a circular hollow beam under pressure pulse loading [J]. International Journal of Impact Engineering, 2021, 156(2): 103958. DOI: 10.1016/j.ijimpeng.2021.103958.

[171]

LI S Q, YU B L, KARAGIOZOVA D, et al. Experimental, numerical, and theoretical studies of the response of short cylindrical stainless steel tubes under lateral air blast loading [J]. International Journal of Impact Engineering, 2019, 124: 48–60. DOI: 10.1016/j.ijimpeng.2018.10.004.

[172]

陈勇, 纪冲, 龙源, 等. 爆炸荷载下不同壁厚圆柱壳动力学行为的研究 [J]. 高压物理学报, 2014, 28(5): 525–532. DOI: 10.11858/gywlxb.2014.05.003.

CHEN Y, JI C, LONG Y, et al. Research on dynamic behaviors of cylindrical shells with different wall-thickness under explosion loading [J]. Chinese Journal of High Pressure Physics, 2014, 28(5): 525–532. DOI: 10.11858/gywlxb.2014.05.003.

[173]

宋克健, 龙源, 纪冲, 等. 薄壁方管结构在爆炸荷载作用下动力响应及破坏模式分析 [J]. 振动与冲击, 2016, 35(10): 133–138. DOI: 10.13465/j.cnki.jvs.2016.10.021.

SONG K J, LONG Y, JI C, et al. Dynamic responses and damage modes of thin-walled square tubes subjected to explosion loading [J]. Journal of Vibration and Shock, 2016, 35(10): 133–138. DOI: 10.13465/j.cnki.jvs.2016.10.021.

[174]

余洋, 纪冲, 周游, 等. 侧向局部爆炸荷载下钢质方管的损伤破坏及影响因素研究 [J]. 振动与冲击, 2018, 37(15): 191–198. DOI: 10.13465/j.cnki.jvs.2018.15.027.

YU Y, JI C, ZHOU Y, et al. Damage and failure of steel square tubes under lateral local explosion loading and their influencing factors [J]. Journal of Vibration and Shock, 2018, 37(15): 191–198. DOI: 10.13465/j.cnki.jvs.2018.15.027.

[175]

JONES N, BIRCH R S. Low-velocity impact of pressurised pipelines [J]. International Journal of Impact Engineering, 2010, 37(2): 207–219. DOI: 10.1016/j.ijimpeng.2009.05.006.

[176]

ZEINODDINI M, HARDING J E, PARKE G A R. Axially pre-loaded steel tubes subjected to lateral impacts: a numerical simulation [J]. International Journal of Impact Engineering, 2008, 35(11): 1267–1279. DOI: 10.1016/j.ijimpeng.2007.08.002.

[177]

KRISTOFFERSEN M, CASADEI F, BØRVIK T, et al. Impact against empty and water-filled X65 steel pipes: experiments and simulations [J]. International Journal of Impact Engineering, 2014, 71: 73–88. DOI: 10.1016/J.IJIMPENG.2014.04.004.

[178]

MADULIAT S, NGO T D, TRAN P, et al. Performance of hollow steel tube bollards under quasi-static and lateral impact load [J]. Thin-Walled Structures, 2015, 88: 41–47. DOI: 10.1016/j.tws.2014.11.024.

[179]

ZHU L, LIU Q Y, JONES N, et al. Experimental study on the deformation of fully clamped pipes under lateral impact [J]. International Journal of Impact Engineering, 2018, 111: 94–105. DOI: 10.1016/j.ijimpeng.2017.09.008.

[180]

ZHANG R, ZHI X D, FAN F. Plastic behavior of circular steel tubes subjected to low-velocity transverse impact [J]. International Journal of Impact Engineering, 2018, 114: 1–19. DOI: 10.1016/j.ijimpeng.2017.12.003.

[181]

DO Q T, MUTTAQIE T, SHIN H K, et al. Dynamic lateral mass impact on steel stringer-stiffened cylinders [J]. International Journal of Impact Engineering, 2018, 116: 105–126. DOI: 10.1016/j.ijimpeng.2018.02.007.

[182]

LU G Y, ZHANG S Y, LEI J P, et al. Dynamic responses and damages of water-filled pre-pressurized metal tube impacted by mass [J]. International Journal of Impact Engineering, 2007, 34(10): 1594–1601. DOI: 10.1016/j.ijimpeng.2006.07.006.

[183]

LU G Y, LEI J P, HAN Z J, et al. Denting and failure of liquid-filled tubes under lateral impact [J]. Acta Mechanica Solida Sinica, 2012, 25(6): 609–615. DOI: 10.1016/S0894-9166(12)60056-1.

[184]

REN Y T, QIU X M, YU T X. Theoretical analysis of the static and dynamic response of tensor skin [J]. International Journal of Impact Engineering, 2014, 64: 75–90. DOI: 10.1016/j.ijimpeng.2013.10.006.

[185]

REN Y T, QIU X M, YU T X. The sensitivity analysis of a geometrically unstable structure under various pulse loading [J]. International Journal of Impact Engineering, 2014, 70: 62–72. DOI: 10.1016/j.ijimpeng.2014.03.005.

[186]

GUPTA N K, VENKATESH. Experimental and numerical studies of dynamic axial compression of thin walled spherical shells [J]. International Journal of Impact Engineering, 2004, 30(8−9): 1225–1240. DOI: 10.1016/J.IJIMPENG.2004.03.009.

[187]

GUPTA N K, MOHAMED SHERIFF N, VELMURUGAN R. Experimental and numerical investigations into collapse behaviour of thin spherical shells under drop hammer impact [J]. International Journal of Solids and Structures, 2007, 44(10): 3136–3155. DOI: 10.1016/j.ijsolstr.2006.09.014.

[188]

路国运, 秦斌, 张国权, 等. 冲击作用下夹层充液薄壁半球壳组合结构的动力响应 [J]. 爆炸与冲击, 2012, 32(6): 561–567. DOI: 10.11883/1001-1455(2012)06-0561-07.

LU G Y, QIN B, ZHANG G Q, et al. Dynamic responses of liquid-filled thin-wall hemispherical shells under impact [J]. Explosion and Shock Waves, 2012, 32(6): 561–567. DOI: 10.11883/1001-1455(2012)06-0561-07.

[189]

YANG H W, GUAN W B, LU G Y. Experimental and numerical investigations into collapse behavior of hemispherical shells under drop hammer impact [J]. Thin-Walled Structures, 2018, 124: 48–57. DOI: 10.1016/j.tws.2017.11.034.

[190]

ZHANG Y H, WU X D, LU G Y, et al. Experimental and numerical studies on dynamic responses of liquid-filled hemispherical shell under axial impact [J]. Thin-Walled Structures, 2018, 131: 606–618. DOI: 10.1016/j.tws.2018.07.003.

[191]

刘文祥, 张德志, 钟方平, 等. 爆炸下球壳变形空间周期分布的理论计算方法 [J]. 爆炸与冲击, 2020, 40(6): 064201. DOI: 10.11883/bzycj-2019-0340.

LIU W X, ZHANG D Z, ZHONG F P, et al. A theoretical method for calculating spatial periodic distribution of deformation of a spherical shell under explosive loading [J]. Explosion and Shock Waves, 2020, 40(6): 064201. DOI: 10.11883/bzycj-2019-0340.

[192]

RUAN H H, GAO Z Y, YU T X. Crushing of thin-walled spheres and sphere arrays [J]. International Journal of Mechanical Sciences, 2006, 48(2): 117–133. DOI: 10.1016/j.ijmecsci.2005.08.006.

[193]

DONG X L, GAO Z Y, YU T X. Dynamic crushing of thin-walled spheres: an experimental study [J]. International Journal of Impact Engineering, 2008, 35(8): 717–726. DOI: 10.1016/j.ijimpeng.2007.11.004.

[194]

ZHANG X W, YU T X. Experimental and numerical study on the dynamic buckling of ping-pong balls under impact loading [J]. International Journal of Nonlinear Sciences and Numerical Simulation, 2012, 13(1): 81–92.

[195]

KARAGIOZOVA D, ZHANG X W, YU T X. Static and dynamic snap-through behaviour of an elastic spherical shell [J]. Acta Mechanica Sinica, 2012, 28(3): 695–710. DOI: 10.1007/s10409-012-0065-z.

[196]

LI J Q, REN H L, NING J G. Deformation and failure of thin spherical shells under dynamic impact loading: experiment and analytical model [J]. Thin-Walled Structures, 2021, 161: 107403. DOI: 10.1016/j.tws.2020.107403.

[197]

HU J X, LU G Y, YANG H W, et al. Dynamic response of internally nested hemispherical shell system to impact loading [J]. Thin-Walled Structures, 2017, 120: 29–37. DOI: 10.1016/j.tws.2017.08.009.

[198]

翟希梅, 王永辉. 爆炸荷载下网壳结构的动力响应及泄爆措施 [J]. 爆炸与冲击, 2012, 32(4): 404–410. DOI: 10.11883/1001-1455(2012)04-0404-07.

ZHAI X M, WANG Y H. Dynamic response and explosion relief of reticulated shell under blast loading [J]. Explosion and Shock Waves, 2012, 32(4): 404–410. DOI: 10.11883/1001-1455(2012)04-0404-07.

[199]

王多智, 范峰, 支旭东, 等. 冲击荷载下单层球面网壳的失效机理 [J]. 爆炸与冲击, 2010, 30(2): 169–177. DOI: 10.11883/1001-1455(2010)02-0169-09.

WANG D Z, FAN F, ZHI X D, et al. Failure mechanism of single-layer reticulated domes subjected to impact loads [J]. Explosion And Shock Waves, 2010, 30(2): 169–177. DOI: 10.11883/1001-1455(2010)02-0169-09.

[200]

王多智, 范峰, 支旭东, 等. 冲击荷载下网壳结构的失效模式及其动力响应特性 [J]. 工程力学, 2014, 31(5): 180–189. DOI: 10.6052/j.issn.1000-4750.2012.12.0950.

WANG D Z, FAN F, ZHI X D, et al. Failure modes and characteristics of dynamic response for reticulated shells under impact [J]. Engineering Mechanics, 2014, 31(5): 180–189. DOI: 10.6052/j.issn.1000-4750.2012.12.0950.

[201]

DONG Q, LI Q M, ZHENG J Y. Further study on strain growth in spherical containment vessels subjected to internal blast loading [J]. International Journal of Impact Engineering, 2010, 37(2): 196–206. DOI: 10.1016/j.ijimpeng.2009.09.001.

[202]

DONG Q, LI Q M, ZHENG J Y. Interactive mechanisms between the internal blast loading and the dynamic elastic response of spherical containment vessels [J]. International Journal of Impact Engineering, 2010, 37(4): 349–358. DOI: 10.1016/j.ijimpeng.2009.10.004.

[203]

CHEN Y J, WU X D, ZHENG J Y, et al. Dynamic responses of discrete multi-layered explosion containment vessels with the consideration of strain-hardening and strain-rate effects [J]. International Journal of Impact Engineering, 2010, 37(7): 842–853. DOI: 10.1016/j.ijimpeng.2009.11.011.

[204]

LANGDON G S, OZINSKY A, YUEN S C K. The response of partially confined right circular stainless steel cylinders to internal air-blast loading [J]. International Journal of Impact Engineering, 2014, 73: 1–14. DOI: 10.1016/j.ijimpeng.2014.05.002.

[205]

刘文祥, 谭书舜, 景吉勇, 等. 球形爆炸容器的内部载荷和响应特性 [J]. 爆炸与冲击, 2013, 33(6): 594–600. DOI: 10.11883/1001-1455(2013)06-0594-07.

LIU W X, TAN S S, JING J Y, et al. Internal loads and structure responses of spherical explosive vessel [J]. Explosion and Shock Waves, 2013, 33(6): 594–600. DOI: 10.11883/1001-1455(2013)06-0594-07.

[206]

崔云霄, 胡永乐, 王春明, 等. 内部爆炸作用下多层钢筒的动态响应 [J]. 爆炸与冲击, 2015, 35(6): 820–824. DOI: 10.11883/1001-1455(2015)06-0820-05.

CUI Y X, HU Y L, WANG C M, et al. Dynamic response of multi-layer steel cylinder under internal intense blast loading [J]. Explosion and Shock Waves, 2015, 35(6): 820–824. DOI: 10.11883/1001-1455(2015)06-0820-05.

[207]

姚术健, 张舵, 郑监, 等. 内部爆炸作用下钢箱结构变形规律性实验 [J]. 爆炸与冲击, 2017, 37(5): 964–968. DOI: 10.11883/1001-1455(2017)05-0964-05.

YAO S J, ZHANG D, ZHENG J, et al. Experimental study of deformation of steel box subjected to internal blast loading [J]. Explosion and Shock Waves, 2017, 37(5): 964–968. DOI: 10.11883/1001-1455(2017)05-0964-05.

[208]

WANG X Y, WANG S S, MA F. Experimental study on the expansion of metal cylinders by detonation [J]. International Journal of Impact Engineering, 2018, 114: 147–152. DOI: 10.1016/j.ijimpeng.2017.12.017.

[209]

LIU X, GU W B, LIU J Q, et al. Dynamic response of cylindrical explosion containment vessels subjected to internal blast loading [J]. International Journal of Impact Engineering, 2020, 135: 103389. DOI: 10.1016/j.ijimpeng.2019.103389.

[210]

CHEN Z F, LI X Y, WANG W, et al. Dynamic burst pressure analysis of cylindrical shells based on average shear stress yield criterion [J]. Thin-Walled Structures, 2020, 148: 106498. DOI: 10.1016/j.tws.2019.106498.

[211]

KARAC A, IVANKOVIC A. Investigating the behaviour of fluid-filled polyethylene containers under base drop impact: a combined experimental/numerical approach [J]. International Journal of Impact Engineering, 2009, 36(4): 621–631. DOI: 10.1016/j.ijimpeng.2008.08.007.

[212]

CAO Y, JIN X L. Dynamic response of flexible container during the impact with the ground [J]. International Journal of Impact Engineering, 2010, 37(10): 999–1007. DOI: 10.1016/j.ijimpeng.2010.05.001.

[213]

TILLETT J P A. A study of the impact of spheres on plates [J]. Proceedings of the Physical Society: Section B, 1954, 67(9): 677–688. DOI: 10.1088/0370-1301/67/9/304.

[214]

HUNTER S C. Energy absorbed by elastic waves during impact [J]. Journal of the Mechanics and Physics of Solids, 1957, 5(3): 162–171. DOI: 10.1016/0022-5096(57)90002-9.

[215]

REED J. Energy losses due to elastic wave propagation during an elastic impact [J]. Journal of Physics D: Applied Physics, 1985, 18(12): 2329–2337. DOI: 10.1088/0022-3727/18/12/004.

[216]

HUTCHINGS I M. Energy absorbed by elastic waves during plastic impact [J]. Journal of Physics D: Applied Physics, 1979, 12(11): 1819–1824. DOI: 10.1088/0022-3727/12/11/010.

[217]

THORNTON C. Coefficient of restitution for collinear collisions of elastic-perfectly plastic spheres [J]. Journal of Applied Mechanics, 1997, 64(2): 383–386. DOI: 10.1115/1.2787319.

[218]

WU C Y, LI L Y, THORNTON C. Rebound behaviour of spheres for plastic impacts [J]. International Journal of Impact Engineering, 2003, 28(9): 929–946. DOI: 10.1016/S0734-743X(03)00014-9.

[219]

WU C Y, LI L Y, THORNTON C. Energy dissipation during normal impact of elastic and elastic-plastic spheres [J]. International Journal of Impact Engineering, 2005, 32(1−4): 593–604. DOI: 10.1016/j.ijimpeng.2005.08.007.

[220]

VU-QUOC L, ZHANG X. An elastoplastic contact force-displacement model in the normal direction: displacement-driven version [J]. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1999, 455(1991): 4013–4044. DOI: 10.1098/rspa.1999.0488.

[221]

VU-QUOC L, ZHANG X, LESBURG L. A normal force-displacement model for contacting spheres accounting for plastic deformation: force-driven formulation [J]. Journal of Applied Mechanics, 2000, 67(2): 363–371. DOI: 10.1115/1.1305334.

[222]

ZHANG X, VU-QUOC L. Modeling the dependence of the coefficient of restitution on the impact velocity in elasto-plastic collisions [J]. International Journal of Impact Engineering, 2002, 27(3): 317–341. DOI: 10.1016/S0734-743X(01)00052-5.

[223]

STRONGE W J. Theoretical coefficient of restitution for planer impact of rough elasto-plastic bodies: CONF-950686-TRN: 95: 006111-0385 [R]. Los Angeles, CA, United States: University of California, 1995.

[224]

STRONGE W J. Impact mechanics [M]. Cambridge: Cambridge University Press, 2000.

[225]

MINAMOTO H, KAWAMURA S. Effects of material strain rate sensitivity in low speed impact between two identical spheres [J]. International Journal of Impact Engineering, 2009, 36(5): 680–686. DOI: 10.1016/j.ijimpeng.2008.10.001.

[226]

MINAMOTO H, KAWAMURA S. Moderately high speed impact of two identical spheres [J]. International Journal of Impact Engineering, 2011, 38(2−3): 123–129. DOI: 10.1016/J.IJIMPENG.2010.09.005.

[227]

ARGATOV I I. Asymptotic modeling of the impact of a spherical indenter on an elastic half-space [J]. International Journal of Solids and Structures, 2008, 45(18−19): 5035–5048. DOI: 10.1016/J.IJSOLSTR.2008.05.003.

[228]

DU Y C, WANG S L, ZHANG J L. Energy dissipation in collision of two balls covered by fine particles [J]. International Journal of Impact Engineering, 2010, 37(3): 309–316. DOI: 10.1016/j.ijimpeng.2009.06.011.

[229]

JACKSON R L, GREEN I, MARGHITU D B. Predicting the coefficient of restitution of impacting elastic-perfectly plastic spheres [J]. Nonlinear Dynamics, 2010, 60(3): 217–229. DOI: 10.1007/s11071-009-9591-z.

[230]

MURAKAMI R, HAYAKAWA H. Effect of elastic vibrations on normal head-on collisions of isothermal spheres [J]. Physical Review E, 2014, 89(1): 012205. DOI: 10.1103/PhysRevE.89.012205.

[231]

MÜLLER P, HECKEL M, SACK A, et al. Complex velocity dependence of the coefficient of restitution of a bouncing ball [J]. Physical Review Letters, 2013, 110(25): 254301. DOI: 10.1103/PhysRevLett.110.254301.

[232]

BÖTTCHER R, MÜLLER P, TRÜE M, et al. Energy dissipation due to flexural waves during impacts [J]. Chemie Ingenieur Technik, 2016, 88(7): 1002–1011. DOI: 10.1002/cite.201500155.

[233]

BOETTCHER R, KUNIK M, EICHMANN S, et al. Revisiting energy dissipation due to elastic waves at impact of spheres on large thick plates [J]. International Journal of Impact Engineering, 2017, 104: 45–54. DOI: 10.1016/j.ijimpeng.2017.02.012.

[234]

PARRA J A, ALONSO J, PACIOS A, et al. Effective energy applied to a glass plate during an impact test [J]. International Journal of Impact Engineering, 2019, 130: 11–18. DOI: 10.1016/j.ijimpeng.2019.03.008.

[235]

YU T X, YANG J L, REID S R. Deformable body impact: dynamic plastic behaviour of a moving free-free beam striking the tip of a cantilever beam [J]. International Journal of Solids and Structures, 2001, 38(2): 261–287. DOI: 10.1016/S0020-7683(00)00019-6.

[236]

YANG J L, YU T X. Dynamic plastic behavior of a free-rotating hinged beam striking a cantilever beam [J]. Mechanics of Structures and Machines, 2001, 29(3): 391–409. DOI: 10.1081/SME-100105657.

[237]

RUAN H H, YU T X. Local deformation models in analyzing beam-on-beam collisions [J]. International Journal of Mechanical Sciences, 2003, 45(3): 397–423. DOI: 10.1016/S0020-7403(03)00082-1.

[238]

RUAN H H, YU T X, HUA Y L. Plastic modal approximations in analyzing beam-on-beam collisions [J]. International Journal of Solids and Structures, 2003, 40(12): 2937–2956. DOI: 10.1016/S0020-7683(03)00098-2.

[239]

RUAN H H, YU T X. Collision between a ring and a beam [J]. International Journal of Mechanical Sciences, 2003, 45(10): 1751–1780. DOI: 10.1016/j.ijmecsci.2003.09.025.

[240]

RUAN H H, YU T X. Collision between mass-spring systems [J]. International Journal of Impact Engineering, 2005, 31(3): 267–288. DOI: 10.1016/j.ijimpeng.2003.11.003.

[241]

RUAN H H, YU T X. Experimental study of collision between a free-free beam and a simply supported beam [J]. International Journal of Impact Engineering, 2005, 32(1−4): 416–443. DOI: 10.1016/j.ijimpeng.2005.03.003.

[242]

YANG J L, LU G Y, YU T X, et al. Experimental study and numerical simulation of pipe-on-pipe impact [J]. International Journal of Impact Engineering, 2009, 36(10−11): 1259–1268. DOI: 10.1016/j.ijimpeng.2009.05.001.

[243]

BAO R H, YU T X. Impact and rebound of an elastic–plastic ring on a rigid target [J]. International Journal of Mechanical Sciences, 2015, 91: 55–63. DOI: 10.1016/j.ijmecsci.2014.03.031.

[244]

李凤云, 吴志鹏, 郑宇轩, 等. 弹性圆环在刚壁上的撞击回弹 [J]. 振动与冲击, 2018, 37(11): 12–17; 26. DOI: 10.13465/j.cnki.jvs.2018.11.003.

LI F Y, WU Z P, ZHENG Y X, et al. An elastic ring impacting against a rigid wall and rebounding [J]. Journal of Vibration and Shock, 2018, 37(11): 12–17; 26. DOI: 10.13465/j.cnki.jvs.2018.11.003.

[245]

WANG Y, YANG Y L, WANG S, et al. Dynamic behavior of circular ring impinging on ideal elastic wall: analytical model and experimental validation [J]. International Journal of Impact Engineering, 2018, 122: 148–160. DOI: 10.1016/J.IJIMPENG.2018.07.009.

[246]

XU S Q, RUAN D, LU G X, et al. Collision and rebounding of circular rings on rigid target [J]. International Journal of Impact Engineering, 2015, 79: 14–21. DOI: 10.1016/j.ijimpeng.2014.07.005.

[247]

ZHANG X W, FU R, YU T X. Experimental study on static/dynamic local buckling of ping pong balls compressed onto a rigid plate [C]//Proceedings of SPIE 7522, Fourth International Conference on Experimental Mechanics. Singapore: SPIE, 2010: 75220Z. DOI: 10.1117/12.851435.

[248]

BAO R H, YU T X. Collision and rebound of ping pong balls on a rigid target [J]. Materials and Design, 2015, 87: 278–286. DOI: 10.1016/j.matdes.2015.08.019.

[249]

CROSS R. The bounce of a ball [J]. American Journal of Physics, 1999, 67(3): 222–227. DOI: 10.1119/1.19229.

[250]

CROSS R. Measurements of the horizontal coefficient of restitution for a superball and a tennis ball [J]. American Journal of Physics, 2002, 70(5): 482–489. DOI: 10.1119/1.1450571.

[251]

CROSS R. Impact behavior of hollow balls [J]. American Journal of Physics, 2014, 82(3): 189–195. DOI: 10.1119/1.4839055.

[252]

CROSS R. Impact of sports balls with striking implements [J]. Sports Engineering, 2014, 17(1): 3–22. DOI: 10.1007/s12283-013-0132-0.

[253]

CROSS R. Impact behavior of a superball [J]. American Journal of Physics, 2015, 83(3): 238–248. DOI: 10.1119/1.4898312.

[254]

HUBBARD M, STRONGE W J. Bounce of hollow balls on flat surfaces [J]. Sports Engineering, 2001, 4(2): 49–61. DOI: 10.1046/j.1460-2687.2001.00073.x.

[255]

ZHAO Y F, SUN Z L, YU Z L. Procedure for studying the repeated contacts and separations in an axial impact involving a non-uniform elastic bar [J]. International Journal of Impact Engineering, 2016, 95: 133–140. DOI: 10.1016/j.ijimpeng.2016.05.006.

[256]

LUNDBERG B, RASTEMO T, HUO J. Effect of pre-impact waves in an elastic rod on coefficient of restitution [J]. International Journal of Impact Engineering, 2021, 151: 103816. DOI: 10.1016/j.ijimpeng.2021.103816.

[257]

GHEADNIA H, CERMIK O, MARGHITU D B. Experimental and theoretical analysis of the elasto-plastic oblique impact of a rod with a flat [J]. International Journal of Impact Engineering, 2015, 86: 307–317. DOI: 10.1016/j.ijimpeng.2015.08.007.

[258]

WANG S, WANG Y, HUANG Z L, et al. Dynamic behavior of elastic bars and beams impinging on ideal springs [J]. Journal of Applied Mechanics, 2016, 83(3): 031002. DOI: 10.1115/1.4032048.

[259]

RUAN H H, YU T X. The unexpectedly small coefficient of restitution of a two-degree-of-freedom mass-spring system and its implications [J]. International Journal of Impact Engineering, 2016, 88: 1–11. DOI: 10.1016/j.ijimpeng.2015.09.005.

[260]

KUNINAKA H, HAYAKAWA H. Anomalous behavior of the coefficient of normal restitution in oblique impact [J]. Physical Review Letters, 2004, 93(15): 154301. DOI: 10.1103/PhysRevLett.93.154301.

[261]

KUNINAKA H, HAYAKAWA H. Simulation of cohesive head-on collisions of thermally activated nanoclusters [J]. Physical Review E, 2009, 79(3): 031309. DOI: 10.1103/PhysRevE.79.031309.

[262]

XU F X, ZHANG X, ZHANG H. A review on functionally graded structures and materials for energy absorption [J]. Engineering Structures, 2018, 171: 309–325. DOI: 10.1016/j.engstruct.2018.05.094.

[263]

SUN Y L, LI Q M. Dynamic compressive behaviour of cellular materials: a review of phenomenon, mechanism and modelling [J]. International Journal of Impact Engineering, 2018, 112: 74–115. DOI: 10.1016/j.ijimpeng.2017.10.006.

[264]

WANG Y L, YU Y, WANG C Y, et al. On the out-of-plane ballistic performances of hexagonal, reentrant, square, triangular and circular honeycomb panels [J]. International Journal of Mechanical Sciences, 2020, 173: 105402. DOI: 10.1016/j.ijmecsci.2019.105402.

[265]

ZHANG W, YIN S, YU T X, et al. Crushing resistance and energy absorption of pomelo peel inspired hierarchical honeycomb [J]. International Journal of Impact Engineering, 2019, 125: 163–172. DOI: 10.1016/j.ijimpeng.2018.11.014.

[266]

GALEHDARI S A, KADKHODAYAN M, HADIDI-MOUD S. Low velocity impact and quasi-static in-plane loading on a graded honeycomb structure; experimental, analytical and numerical study [J]. Aerospace Science and Technology, 2015, 47: 425–433. DOI: 10.1016/j.ast.2015.10.010.

[267]

WANG X, ZHANG P, LUDWICK S, et al. Natural frequency optimization of 3D printed variable-density honeycomb structure via a homogenization-based approach [J]. Additive Manufacturing, 2018, 20: 189–198. DOI: 10.1016/j.addma.2017.10.001.

[268]

IMBALZANO G, LINFORTH S, NGO T D, et al. Blast resistance of auxetic and honeycomb sandwich panels: comparisons and parametric designs [J]. Composite Structures, 2018, 183: 242–261. DOI: 10.1016/j.compstruct.2017.03.018.

[269]

RUAN D, LU G X, WANG B, et al. In-plane dynamic crushing of honeycombs: a finite element study [J]. International Journal of Impact Engineering, 2003, 28(2): 161–182. DOI: 10.1016/S0734-743X(02)00056-8.

[270]

WANG H, LU Z X, YANG Z Y, et al. A novel re-entrant auxetic honeycomb with enhanced in-plane impact resistance [J]. Composite Structures, 2019, 208: 758–770. DOI: 10.1016/j.compstruct.2018.10.024.

[271]

LU G X, YU T X. Energy absorption of structures and materials [M]. Cambridge: Woodhead Publishing Limited, 2003.

[272]

SHEN C J, LU G X, YU T X. Dynamic behavior of graded honeycombs: a finite element study [J]. Composite Structures, 2013, 98: 282–293. DOI: 10.1016/j.compstruct.2012.11.002.

[273]

MOUSANEZHAD D, GHOSH R, AJDARI A, et al. Impact resistance and energy absorption of regular and functionally graded hexagonal honeycombs with cell wall material strain hardening [J]. International Journal of Mechanical Sciences, 2014, 89: 413–422. DOI: 10.1016/j.ijmecsci.2014.10.012.

[274]

GIBSON L J, ASHBY M F. Cellular solids: structure and properties [M]. Cambridge, UK: Cambridge University Press, 1997.

[275]

WIERZBICKI T. Crushing analysis of metal honeycombs [J]. International Journal of Impact Engineering, 1983, 1(2): 157–174. DOI: 10.1016/0734-743X(83)90004-0.

[276]

ZHANG X, HUH H. Crushing analysis of polygonal columns and angle elements [J]. International Journal of Impact Engineering, 2010, 37(4): 441–451. DOI: 10.1016/j.ijimpeng.2009.06.009.

[277]

ZHANG X, ZHANG H. Experimental and numerical investigation on crush resistance of polygonal columns and angle elements [J]. Thin-Walled Structures, 2012, 57: 25–36. DOI: 10.1016/j.tws.2012.04.006.

[278]

WIERZBICKI T, ABRAMOWICZ W. On the crushing mechanics of thin-walled structures [J]. Journal of Applied Mechanics, 1983, 50(4a): 727–734. DOI: 10.1115/1.3167137.

[279]

ZHANG X, ZHANG H. Theoretical and numerical investigation on the crush resistance of rhombic and kagome honeycombs [J]. Composite Structures, 2013, 96: 143–152. DOI: 10.1016/j.compstruct.2012.09.028.

[280]

HU L L, HE X L, WU G P, et al. Dynamic crushing of the circular-celled honeycombs under out-of-plane impact [J]. International Journal of Impact Engineering, 2015, 75: 150–161. DOI: 10.1016/j.ijimpeng.2014.08.008.

[281]

ALEXANDER J M. An approximate analysis of the collapse of thin cylindrical shells under axial loading [J]. The Quarterly Journal of Mechanics and Applied Mathematics, 1960, 13(1): 10–15. DOI: 10.1093/qjmam/13.1.10.

[282]

REID S R, PENG C. Dynamic uniaxial crushing of wood [J]. International Journal of Impact Engineering, 1997, 19(5−6): 531–570. DOI: 10.1016/S0734-743X(97)00016-X.

[283]

ZOU Z, REID S R, TAN P J, et al. Dynamic crushing of honeycombs and features of shock fronts [J]. International Journal of Impact Engineering, 2009, 36(1): 165–176. DOI: 10.1016/j.ijimpeng.2007.11.008.

[284]

HU L L, YU T X. Dynamic crushing strength of hexagonal honeycombs [J]. International Journal of Impact Engineering, 2010, 37(5): 467–474. DOI: 10.1016/j.ijimpeng.2009.12.001.

[285]

HU L L, YU T X. Mechanical behavior of hexagonal honeycombs under low-velocity impact: theory and simulations [J]. International Journal of Solids and Structures, 2013, 50(20−21): 3152–3165. DOI: 10.1016/j.ijsolstr.2013.05.017.

[286]

HU L L, YOU F F, YU T X. Effect of cell-wall angle on the in-plane crushing behaviour of hexagonal honeycombs [J]. Materials and Design, 2013, 46: 511–523. DOI: 10.1016/J.MATDES.2012.10.050.

[287]

TAO Y, CHEN M J, PEI Y M, et al. Strain rate effect on mechanical behavior of metallic honeycombs under out-of-plane dynamic compression [J]. Journal of Applied Mechanics, 2015, 82(2). DOI: 10.1115/1.4029471.

[288]

TAO Y, CHEN M J, CHEN H S, et al. Strain rate effect on the out-of-plane dynamic compressive behavior of metallic honeycombs: experiment and theory [J]. Composite Structures, 2015, 132: 644–651. DOI: 10.1016/j.compstruct.2015.06.015.

[289]

TAO Y, DUAN S Y, WEN W B, et al. Enhanced out-of-plane crushing strength and energy absorption of in-plane graded honeycombs [J]. Composites Part B: Engineering, 2017, 118: 33–40. DOI: 10.1016/j.compositesb.2017.03.002.

[290]

QIAO J X, CHEN C Q. Impact resistance of uniform and functionally graded auxetic double arrowhead honeycombs [J]. International Journal of Impact Engineering, 2015, 83: 47–58. DOI: 10.1016/j.ijimpeng.2015.04.005.

[291]

ZHANG Y, CHEN T T, XU X, et al. Out-of-plane mechanical behaviors of a side hierarchical honeycomb [J]. Mechanics of Materials, 2020, 140: 103227. DOI: 10.1016/j.mechmat.2019.103227.

[292]

QIAO J X, CHEN C Q. In-plane crushing of a hierarchical honeycomb [J]. International Journal of Solids and Structures, 2016, 85−86: 57–66. DOI: 10.1016/j.ijsolstr.2016.02.003.

[293]

CHEN W S, HAO H. Experimental investigations and numerical simulations of multi-arch double-layered panels under uniform impulsive loadings [J]. International Journal of Impact Engineering, 2014, 63: 140–157. DOI: 10.1016/j.ijimpeng.2013.08.012.

[294]

MENG Y, LIN Y L, ZHANG Y W, et al. Study on the dynamic response of combined honeycomb structure under blast loading [J]. Thin-Walled Structures, 2020, 157: 107082. DOI: 10.1016/j.tws.2020.107082.

[295]

HATAMI H, RAD M S, JAHROMI A G. A theoretical analysis of the energy absorption response of expanded metal tubes under impact loads [J]. International Journal of Impact Engineering, 2017, 109: 224–239. DOI: 10.1016/j.ijimpeng.2017.06.009.

[296]

吴文旺, 肖登宝, 孟嘉旭, 等. 负泊松比结构力学设计、抗冲击性能及在车辆工程应用与展望 [J]. 力学学报, 2021, 53(3): 611–638. DOI: 10.6052/0459-1879-20-333.

WU W W, XIAO D B, MENG J X, et al. Mechanical design, impact energy absorption and applications of auxetic structures in automobile lightweight engineering [J]. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(3): 611–638. DOI: 10.6052/0459-1879-20-333.

[297]

ZHANG X C, AN L Q, DING H M, et al. The influence of cell micro-structure on the in-plane dynamic crushing of honeycombs with negative Poisson’s ratio [J]. Journal of Sandwich Structures and Materials, 2015, 17(1): 26–55. DOI: 10.1177/1099636214554180.

[298]

BAERTSCH F, AMELI A, MAYER T. Finite-element modeling and optimization of 3D-printed auxetic reentrant structures with stiffness gradient under low-velocity impact [J]. Journal of Engineering Mechanics, 2021, 147(7): 04021036. DOI: 10.1061/(ASCE)EM.1943-7889.0001923.

[299]

QIAO J X, CHEN C Q. Analyses on the in-plane impact resistance of auxetic double arrowhead honeycombs [J]. Journal of Applied Mechanics, 2015, 82(5): 051007. DOI: 10.1115/1.4030007.

[300]

GAO D W, WANG S H, ZHANG M Z, et al. Experimental and numerical investigation on in-plane impact behaviour of chiral auxetic structure [J]. Composite Structures, 2021, 267: 113922. DOI: 10.1016/j.compstruct.2021.113922.

[301]

DESHPANDE V S, FLECK N A. Isotropic constitutive models for metallic foams [J]. Journal of the Mechanics and Physics of Solids, 2000, 48(6−7): 1253–1283. DOI: 10.1016/S0022-5096(99)00082-4.

[302]

TAN P J, REID S R, HARRIGAN J J, et al. Dynamic compressive strength properties of aluminium foams: Part Ⅰ: experimental data and observations [J]. Journal of the Mechanics and Physics of Solids, 2005, 53(10): 2174–2205. DOI: 10.1016/j.jmps.2005.05.007.

[303]

TAN P J, REID S R, HARRIGAN J J, et al. Dynamic compressive strength properties of aluminium foams: Part Ⅱ: ‘shock’ theory and comparison with experimental data and numerical models [J]. Journal of the Mechanics and Physics of Solids, 2005, 53(10): 2206–2230. DOI: 10.1016/J.JMPS.2005.05.003.

[304]

HARRIGAN J J, REID S R, TAN P J, et al. High rate crushing of wood along the grain [J]. International Journal of Mechanical Sciences, 2005, 47(4−5): 521–544. DOI: 10.1016/j.ijmecsci.2004.12.013.

[305]

ZHENG Z J, LIU Y D, YU J L, et al. Dynamic crushing of cellular materials: continuum-based wave models for the transitional and shock modes [J]. International Journal of Impact Engineering, 2012, 42: 66–79. DOI: 10.1016/j.ijimpeng.2011.09.009.

[306]

DING Y Y, WANG S L, ZHAO K, et al. Blast alleviation of cellular sacrificial cladding: a nonlinear plastic shock model [J]. International Journal of Applied Mechanics, 2016, 8(4): 1650057. DOI: 10.1142/S1758825116500575.

[307]

蔡正宇, 丁圆圆, 王士龙, 等. 梯度多胞牺牲层的抗爆炸分析 [J]. 爆炸与冲击, 2017, 37(3): 396–404. DOI: 10.11883/1001-1455(2017)03-0396-09.

CAI Z Y, DING Y Y, WANG S L, et al. Anti-blast analysis of graded cellular sacrificial cladding [J]. Explosion and Shock Waves, 2017, 37(3): 396–404. DOI: 10.11883/1001-1455(2017)03-0396-09.

[308]

KADER M A, ISLAM M A, HAZELL P J, et al. Modelling and characterization of cell collapse in aluminium foams during dynamic loading [J]. International Journal of Impact Engineering, 2016, 96: 78–88. DOI: 10.1016/j.ijimpeng.2016.05.020.

[309]

LIAO S F, ZHENG Z J, YU J L. Dynamic crushing of 2D cellular structures: local strain field and shock wave velocity [J]. International Journal of Impact Engineering, 2013, 57: 7–16. DOI: 10.1016/j.ijimpeng.2013.01.008.

[310]

ZHENG Z J, WANG C F, YU J L, et al. Dynamic stress-strain states for metal foams using a 3D cellular model [J]. Journal of the Mechanics and Physics of Solids, 2014, 72: 93–114. DOI: 10.1016/j.jmps.2014.07.013.

[311]

LI Z Q, ZHANG J J, FAN J H, et al. On crushing response of the three-dimensional closed-cell foam based on Voronoi model [J]. Mechanics of Materials, 2014, 68: 85–94. DOI: 10.1016/j.mechmat.2013.08.009.

[312]

KOOHBOR B, KIDANE A. Design optimization of continuously and discretely graded foam materials for efficient energy absorption [J]. Materials and Design, 2016, 102: 151–161. DOI: 10.1016/J.MATDES.2016.04.031.

[313]

GUPTA N. A functionally graded syntactic foam material for high energy absorption under compression [J]. Materials Letters, 2007, 61(4−5): 979–982. DOI: 10.1016/j.matlet.2006.06.033.

[314]

ZENG H B, PATTOFATTO S, ZHAO H, et al. Impact behaviour of hollow sphere agglomerates with density gradient [J]. International Journal of Mechanical Sciences, 2010, 52(5): 680–688. DOI: 10.1016/j.ijmecsci.2009.11.012.

[315]

SHEN C J, YU T X, LU G X. Double shock mode in graded cellular rod under impact [J]. International Journal of Solids and Structures, 2013, 50(1): 217–233. DOI: 10.1016/j.ijsolstr.2012.09.021.

[316]

SHEN C J, LU G X, YU T X. Investigation into the behavior of a graded cellular rod under impact [J]. International Journal of Impact Engineering, 2014, 74: 92–106. DOI: 10.1016/j.ijimpeng.2014.02.015.

[317]

ZHANG J J, LU G X, RUAN D, et al. Experimental observations of the double shock deformation mode in density graded honeycombs [J]. International Journal of Impact Engineering, 2019, 134: 103386. DOI: 10.1016/j.ijimpeng.2019.103386.

[318]

范华林, 杨卫. 轻质高强点阵材料及其力学性能研究进展 [J]. 力学进展, 2007, 37(1): 99–112. DOI: 10.3321/j.issn:1000-0992.2007.01.012.

FAN H L, YANG W. Development of lattice materials with high specific stiffness and strength [J]. Advances in Mechanics, 2007, 37(1): 99–112. DOI: 10.3321/j.issn:1000-0992.2007.01.012.

[319]

易建坤, 马翰宇, 朱建生, 等. 点阵金属夹芯结构抗爆炸冲击问题研究的综述 [J]. 兵器材料科学与工程, 2014, 37(2): 116–120. DOI: 10.14024/j.cnki.1004-244x.2014.02.010.

YI J K, MA H Y, ZHU J S, et al. Review of explosion and shock wave resistance of metallic lattice sandwich structure [J]. Ordnance Material Science and Engineering, 2014, 37(2): 116–120. DOI: 10.14024/j.cnki.1004-244x.2014.02.010.

[320]

HUANG W, FAN Z H, ZHANG W, et al. Impulsive response of composite sandwich structure with tetrahedral truss core [J]. Composites Science and Technology, 2019, 176: 17–28. DOI: 10.1016/j.compscitech.2019.03.020.

[321]

DESHPANDE V S, ASHBY M F, FLECK N A. Foam topology: bending versus stretching dominated architectures [J]. Acta Materialia, 2001, 49(6): 1035–1040. DOI: 10.1016/S1359-6454(00)00379-7.

[322]

QIU X M, ZHANG J, YU T X. Collapse of periodic planar lattices under uniaxial compression: part Ⅰ: quasi-static strength predicted by limit analysis [J]. International Journal of Impact Engineering, 2009, 36(10−11): 1223–1230. DOI: 10.1016/J.IJIMPENG.2009.05.011.

[323]

QIU X M, ZHANG J, YU T X. Collapse of periodic planar lattices under uniaxial compression: part Ⅱ: dynamic crushing based on finite element simulation [J]. International Journal of Impact Engineering, 2009, 36(10−11): 1231–1241. DOI: 10.1016/J.IJIMPENG.2009.05.010.

[324]

DESHPANDE V S, FLECK N A, ASHBY M F. Effective properties of the octet-truss lattice material [J]. Journal of the Mechanics and Physics of Solids, 2001, 49(8): 1747–1769. DOI: 10.1016/S0022-5096(01)00010-2.

[325]

JIN N, WANG F C, WANG Y W, et al. Failure and energy absorption characteristics of four lattice structures under dynamic loading [J]. Materials and Design, 2019, 169: 107655. DOI: 10.1016/J.MATDES.2019.107655.

[326]

WALLACH J C, GIBSON L J. Mechanical behavior of a three-dimensional truss material [J]. International Journal of Solids and Structures, 2001, 38(40−41): 7181–7196. DOI: 10.1016/S0020-7683(00)00400-5.

[327]

HYUN S, KARLSSON A M, TORQUATO S, et al. Simulated properties of Kagomé and tetragonal truss core panels [J]. International Journal of Solids and Structures, 2003, 40(25): 6989–6998. DOI: 10.1016/S0020-7683(03)00350-0.

[328]

HAMMETTER C I, RINALDI R G, ZOK F W. Pyramidal lattice structures for high strength and energy absorption [J]. Journal of Applied Mechanics, 2013, 80(4): 041015. DOI: 10.1115/1.4007865.

[329]

TANCOGNE-DEJEAN T, MOHR D. Stiffness and specific energy absorption of additively-manufactured metallic BCC metamaterials composed of tapered beams [J]. International Journal of Mechanical Sciences, 2018, 141: 101–116. DOI: 10.1016/j.ijmecsci.2018.03.027.

[330]

OZDEMIR Z, HERNANDEZ-NAVA E, TYAS A, et al. Energy absorption in lattice structures in dynamics: experiments [J]. International Journal of Impact Engineering, 2016, 89: 49–61. DOI: 10.1016/j.ijimpeng.2015.10.007.

[331]

TANCOGNE-DEJEAN T, SPIERINGS A B, MOHR D. Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading [J]. Acta Materialia, 2016, 116: 14–28. DOI: 10.1016/j.actamat.2016.05.054.

[332]

EVANS A G, HE M Y, DESHPANDE V S, et al. Concepts for enhanced energy absorption using hollow micro-lattices [J]. International Journal of Impact Engineering, 2010, 37(9): 947–959. DOI: 10.1016/j.ijimpeng.2010.03.007.

[333]

YIN S, CHEN H Y, LI J N, et al. Effects of architecture level on mechanical properties of hierarchical lattice materials [J]. International Journal of Mechanical Sciences, 2019, 157−158: 282–292. DOI: 10.1016/j.ijmecsci.2019.04.051.

[334]

YIN S, WANG H T, HU J X, et al. Fabrication and anti-crushing performance of hollow honeytubes [J]. Composites Part B: Engineering, 2019, 179: 107522. DOI: 10.1016/j.compositesb.2019.107522.

[335]

WENDY GU X, GREER J R. Ultra-strong architected Cu meso-lattices [J]. Extreme Mechanics Letters, 2015, 2: 7–14. DOI: 10.1016/j.eml.2015.01.006.

[336]

MEZA L R, DAS S, GREER J R. Strong, lightweight, and recoverable three-dimensional ceramic nanolattices [J]. Science, 2014, 345(6202): 1322–1326. DOI: 10.1126/science.1255908.

[337]

SCHAEDLER T A, JACOBSEN A J, TORRENTS A, et al. Ultralight metallic microlattices [J]. Science, 2011, 334(6058): 962–965. DOI: 10.1126/science.1211649.

[338]

ZHANG X, VYATSKIKH A, GAO H J, et al. Lightweight, flaw-tolerant, and ultrastrong nanoarchitected carbon [J]. Proceedings of the National Academy of Sciences of the United States of America, 2019, 116(14): 6665–6672. DOI: 10.1073/pnas.1817309116.

[339]

HE Z Z, WANG F C, ZHU Y B, et al. Mechanical properties of copper octet-truss nanolattices [J]. Journal of the Mechanics and Physics of Solids, 2017, 101: 133–149. DOI: 10.1016/j.jmps.2017.01.019.

[340]

HAN S C, LEE J W, KANG K. A new type of low density material: shellular [J]. Advanced Materials, 2015, 27(37): 5506–5511. DOI: 10.1002/adma.201501546.

[341]

LEE M G, LEE J W, HAN S C, et al. Mechanical analyses of “Shellular”, an ultralow-density material [J]. Acta Materialia, 2016, 103: 595–607. DOI: 10.1016/j.actamat.2015.10.040.

[342]

CHEN X Y, JI Q X, WEI J Z, et al. Light-weight shell-lattice metamaterials for mechanical shock absorption [J]. International Journal of Mechanical Sciences, 2020, 169: 105288. DOI: 10.1016/j.ijmecsci.2019.105288.

[343]

KUSHWAHA M S, HALEVI P, DOBRZYNSKI L, et al. Acoustic band structure of periodic elastic composites [J]. Physical Review Letters, 1993, 71(13): 2022–2025. DOI: 10.1103/PhysRevLett.71.2022.

[344]

张研, 韩林, 蒋林华, 等. 声子晶体的计算方法与带隙特性 [M]. 北京: 科学出版社, 2015.

[345]

LIU Z Y, ZHANG X X, MAO Y W, et al. Locally resonant sonic materials [J]. Science, 2000, 289(5485): 1734–1736. DOI: 10.1126/science.289.5485.1734.

[346]

DEYMIER P A. Acoustic metamaterials and phononic crystals [M]. Berlin Heidelberg: Springer, 2013. DOI: 10.1007/978-3-642-31232-8.

[347]

LIU J Y, GUO H B, WANG T. A review of acoustic metamaterials and phononic crystals [J]. Crystals, 2020, 10(4): 305. DOI: 10.3390/cryst10040305.

[348]

CUMMER S A, CHRISTENSEN J, ALÙ A. Controlling sound with acoustic metamaterials [J]. Nature Reviews Materials, 2016, 1(3): 16001. DOI: 10.1038/natrevmats.2016.1.

[349]

WANG Y F, WANG Y Z, WU B, et al. Tunable and active phononic crystals and metamaterials [J]. Applied Mechanics Reviews, 2020, 72(4): 040801. DOI: 10.1115/1.4046222.

[350]

TAN K T, HUANG H H, SUN C T. Optimizing the band gap of effective mass negativity in acoustic metamaterials [J]. Applied Physics Letters, 2012, 101(24): 241902. DOI: 10.1063/1.4770370.

[351]

XU X C, LI P, ZHOU X M, et al. Experimental study on acoustic subwavelength imaging based on zero-mass metamaterials [J]. EPL (Europhysics Letters), 2015, 109(2): 28001. DOI: 10.1209/0295-5075/109/28001.

[352]

TAN K T, HUANG H H, SUN C T. Blast-wave impact mitigation using negative effective mass density concept of elastic metamaterials [J]. International Journal of Impact Engineering, 2014, 64: 20–29. DOI: 10.1016/j.ijimpeng.2013.09.003.

[353]

XU X C, BARNHART M V, LI X P, et al. Tailoring vibration suppression bands with hierarchical metamaterials containing local resonators [J]. Journal of Sound and Vibration, 2019, 442: 237–248. DOI: 10.1016/j.jsv.2018.10.065.

[354]

CHEN Y Y, BARNHART M V, CHEN J K, et al. Dissipative elastic metamaterials for broadband wave mitigation at subwavelength scale [J]. Composite Structures, 2016, 136: 358–371. DOI: 10.1016/j.compstruct.2015.09.048.

[355]

XU X C, BARNHART M V, FANG X, et al. A nonlinear dissipative elastic metamaterial for broadband wave mitigation [J]. International Journal of Mechanical Sciences, 2019, 164: 105159. DOI: 10.1016/j.ijmecsci.2019.105159.

[356]

AIROLDI L, RUZZENE M. Design of tunable acoustic metamaterials through periodic arrays of resonant shunted piezos [J]. New Journal of Physics, 2011, 13(11): 113010. DOI: 10.1088/1367-2630/13/11/113010.

[357]

XIAO X, HE Z C, LI E, et al. A lightweight adaptive hybrid laminate metamaterial with higher design freedom for wave attenuation [J]. Composite Structures, 2020, 243: 112230. DOI: 10.1016/j.compstruct.2020.112230.

[358]

NING S W, YANG F Y, LUO C C, et al. Low-frequency tunable locally resonant band gaps in acoustic metamaterials through large deformation [J]. Extreme Mechanics Letters, 2020, 35: 100623. DOI: 10.1016/j.eml.2019.100623.

[359]

NESTERENKO V F. Propagation of nonlinear compression pulses in granular media [J]. Journal of Applied Mechanics and Technical Physics, 1983, 24(5): 733–743. DOI: 10.1007/BF00905892.

[360]

PORTER M A, KEVREKIDIS P G, DARAIO C. Granular crystals: nonlinear dynamics meets materials engineering [J]. Physics Today, 2015, 68(11): 44–50. DOI: 10.1063/PT.3.2981.

[361]

NGO D, GRIFFITHS S, KHATRI D, et al. Highly nonlinear solitary waves in chains of hollow spherical particles [J]. Granular Matter, 2013, 15(2): 149–155. DOI: 10.1007/s10035-012-0377-5.

[362]

NGO D, KHATRI D, DARAIO C. Highly nonlinear solitary waves in chains of ellipsoidal particles [J]. Physical Review E, 2011, 84(2): 026610. DOI: 10.1103/PhysRevE.84.026610.

[363]

KHATRI D, NGO D, DARAIO C. Highly nonlinear solitary waves in chains of cylindrical particles [J]. Granular Matter, 2012, 14(1): 63–69. DOI: 10.1007/s10035-011-0297-9.

[364]

BOECHLER N, THEOCHARIS G, JOB S, et al. Discrete breathers in one-dimensional diatomic granular crystals [J]. Physical Review Letters, 2010, 104(24): 244302. DOI: 10.1103/PhysRevLett.104.244302.

[365]

DARAIO C, NESTERENKO V F, HERBOLD E B, et al. Strongly nonlinear waves in a chain of Teflon beads [J]. Physical Review E, 2005, 72(1): 016603. DOI: 10.1103/PhysRevE.72.016603.

[366]

PORTER M A, DARAIO C, SZELENGOWICZ I, et al. Highly nonlinear solitary waves in heterogeneous periodic granular media [J]. Physica D: Nonlinear Phenomena, 2009, 238(6): 666–676. DOI: 10.1016/j.physd.2008.12.010.

[367]

LEONARD A, DARAIO C, AWASTHI A, et al. Effects of weak disorder on stress-wave anisotropy in centered square nonlinear granular crystals [J]. Physical Review E, 2012, 86(3): 031305. DOI: 10.1103/PhysRevE.86.031305.

[368]

BURGOYNE H A, NEWMAN J A, JACKSON W C, et al. Guided impact mitigation in 2D and 3D granular crystals [J]. Procedia Engineering, 2015, 103: 52–59. DOI: 10.1016/j.proeng.2015.04.008.

[369]

LIN W H, DARAIO C. Wave propagation in one-dimensional microscopic granular chains [J]. Physical Review E, 2016, 94(5): 052907. DOI: 10.1103/PhysRevE.94.052907.

[370]

WANG W J, ZHU Z G. Two kinds of dissipation in sheared granular materials [J]. EPL (Europhysics Letters), 2008, 82(2): 24004. DOI: 10.1209/0295-5075/82/24004.

[371]

MORGADO W A M, OPPENHEIM I. Energy dissipation for quasielastic granular particle collisions [J]. Physical Review E, 1997, 55(2): 1940–1945. DOI: 10.1103/PhysRevE.55.1940.

[372]

WANG E, ON T, LAMBROS J. An experimental study of the dynamic elasto-plastic contact behavior of dimer metallic granules [J]. Experimental Mechanics, 2013, 53(5): 883–892. DOI: 10.1007/s11340-012-9696-z.

[373]

HERBOLD E B, NESTERENKO V F. The role of dissipation on wave shape and attenuation in granular chains [J]. Physics Procedia, 2010, 3(1): 465–471. DOI: 10.1016/j.phpro.2010.01.061.

[374]

YANG J, GONZALEZ M, KIM E, et al. Attenuation of solitary waves and localization of breathers in 1D granular crystals visualized via high speed photography [J]. Experimental Mechanics, 2014, 54(6): 1043–1057. DOI: 10.1007/s11340-014-9866-2.

[375]

NESTERENKO V F. Waves in strongly nonlinear discrete systems [J]. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2018, 376(2127): 20170130. DOI: 10.1098/rsta.2017.0130.

[376]

KIM H, KIM E, CHONG C, et al. Demonstration of dispersive rarefaction shocks in hollow elliptical cylinder chains [J]. Physical Review Letters, 2018, 120(19): 194101. DOI: 10.1103/PhysRevLett.120.194101.

[377]

ZHANG W, XU J. Tunable traveling wave properties in one-dimensional chains composed from hollow cylinders: from compression to rarefaction waves [J]. International Journal of Mechanical Sciences, 2021, 191: 106073. DOI: 10.1016/j.ijmecsci.2020.106073.

[378]

彭克锋, 崔世堂, 潘昊, 等. 冲击载荷作用下柱壳链中的弹性波传播简化模型及其解析解 [J]. 爆炸与冲击, 2021, 41(1): 011403. DOI: 10.11883/bzycj-2020-0246.

PENG K F, CUI S T, PAN H, et al. Simplified model of elastic wave propagation in cylindrical shell chain under impact load and its analytical solution [J]. Explosion and Shock Waves, 2021, 41(1): 011403. DOI: 10.11883/bzycj-2020-0246.

[379]

ZHANG W, XU J. Universal design law of equivalent systems for Nesterenko solitary waves transmission [J]. Granular Matter, 2020, 22(2): 46. DOI: 10.1007/S10035-020-1011-6.

[380]

ZHANG W, XU J. Toward understanding solitary wave propagation in composite-cylinders-based 1D granular crystals [J]. Extreme Mechanics Letters, 2021, 43: 101156. DOI: 10.1016/j.eml.2020.101156.

[381]

YIN S, CHEN D H, XU J. Novel propagation behavior of impact stress wave in one-dimensional hollow spherical structures [J]. International Journal of Impact Engineering, 2019, 134: 103368. DOI: 10.1016/j.ijimpeng.2019.103368.

[382]

ZHANG W, XU J. Quantitatively solitary wave tuning strategies based on one-dimensional cylindrical granular chains [J]. Extreme Mechanics Letters, 2020, 40: 100972. DOI: 10.1016/j.eml.2020.100972.

[383]

CHONG C, PORTER M A, KEVREKIDIS P G, et al. Nonlinear coherent structures in granular crystals [J]. Journal of Physics: Condensed Matter, 2017, 29(41): 413003. DOI: 10.1088/1361-648X/aa7672.

[384]

KIM E, YANG J. Review: wave propagation in granular metamaterials [J]. Functional Composites and Structures, 2019, 1(1): 012002. DOI: 10.1088/2631-6331/ab0c7e.

[385]

SEN S, HONG J, BANG J, et al. Solitary waves in the granular chain [J]. Physics Reports, 2008, 462(2): 21–66. DOI: 10.1016/j.physrep.2007.10.007.

[386]

KEVREKIDIS P G. Non-linear waves in lattices: past, present, future [J]. IMA Journal of Applied Mathematics, 2011, 76(3): 389–423. DOI: 10.1093/imamat/hxr015.

[387]

李威, 郭权锋. 碳纤维复合材料在航天领域的应用 [J]. 中国光学, 2011, 4(3): 201–212. DOI: 10.3969/j.issn.2095-1531.2011.03.001.

LI W, GUO Q F. Application of carbon fiber composites to cosmonautic fields [J]. Chinese Optics, 2011, 4(3): 201–212. DOI: 10.3969/j.issn.2095-1531.2011.03.001.

[388]

SHAH S Z H, KARUPPANAN S, MEGAT-YUSOFF P S M, et al. Impact resistance and damage tolerance of fiber reinforced composites: a review [J]. Composite Structures, 2019, 217: 100–121. DOI: 10.1016/j.compstruct.2019.03.021.

[389]

SADIGHI M, ALDERLIESTEN R C, BENEDICTUS R. Impact resistance of fiber-metal laminates: a review [J]. International Journal of Impact Engineering, 2012, 49: 77–90. DOI: 10.1016/j.ijimpeng.2012.05.006.

[390]

SHYR T W, PAN Y H. Impact resistance and damage characteristics of composite laminates [J]. Composite Structures, 2003, 62(2): 193–203. DOI: 10.1016/S0263-8223(03)00114-4.

[391]

OLIVEIRA L, LUIZ M, TONATTO P, et al. Experimental and numerical assessment of sustainable bamboo core sandwich panels under low-velocity impact [J]. Construction and Building Materials, 2021, 292(5): 123437. DOI: 10.1016/j.conbuildmat.2021.123437.

[392]

ZHANG D H, JIANG D, FEI Q, et al. Experimental and numerical investigation on indentation and energy absorption of a honeycomb sandwich panel under low-velocity impact [J]. Finite Elements in Analysis and Design, 2016, 117−118: 21–30. DOI: 10.1016/j.finel.2016.04.003.

[393]

SUN G Y, CHEN D D, WANG H X, et al. High-velocity impact behaviour of aluminium honeycomb sandwich panels with different structural configurations [J]. International Journal of Impact Engineering, 2018, 122: 119–136. DOI: 10.1016/j.ijimpeng.2018.08.007.

[394]

FOO C C, CHAI G B, SEAH L K. A model to predict low-velocity impact response and damage in sandwich composites [J]. Composites Science and Technology, 2008, 68(6): 1348–1356. DOI: 10.1016/j.compscitech.2007.12.007.

[395]

QIN Q H, WANG T J. Low-velocity heavy-mass impact response of slender metal foam core sandwich beam [J]. Composite Structures, 2011, 93(6): 1526–1537. DOI: 10.1016/j.compstruct.2010.11.018.

[396]

XIANG C P, QIN Q H, WANG F F, et al. Impulsive response of rectangular metal sandwich plate with a graded foam core [J]. International Journal of Applied Mechanics, 2018, 10(6): 1850064. DOI: 10.1142/S1758825118500643.

[397]

ZHANG J X, YE Y, QIN Q H. On dynamic response of rectangular sandwich plates with fibre-metal laminate face-sheets under blast loading [J]. Thin-Walled Structures, 2019, 144: 106288. DOI: 10.1016/J.TWS.2019.106288.

[398]

ZHANG J X, QIN Q H, WANG T J. Compressive strengths and dynamic response of corrugated metal sandwich plates with unfilled and foam-filled sinusoidal plate cores [J]. Acta Mechanica, 2013, 224(4): 759–775. DOI: 10.1007/s00707-012-0770-5.

[399]

ZHANG J X, LIU K, YE Y, et al. Low-velocity impact of rectangular multilayer sandwich plates [J]. Thin-Walled Structures, 2019, 141: 308–318. DOI: 10.1016/j.tws.2019.04.033.

[400]

WANG Z J, QIN Q H, ZHANG J X, et al. Low-velocity impact response of geometrically asymmetric slender sandwich beams with metal foam core [J]. Composite Structures, 2013, 98: 1–14. DOI: 10.1016/j.compstruct.2012.10.054.

[401]

CRUPI V, EPASTO G, GUGLIELMINO E. Collapse modes in aluminium honeycomb sandwich panels under bending and impact loading [J]. International Journal of Impact Engineering, 2012, 43: 6–15. DOI: 10.1016/j.ijimpeng.2011.12.002.

[402]

LIU J J, ZHU W Q, YU Z L, et al. Dynamic shear-lag model for understanding the role of matrix in energy dissipation in fiber-reinforced composites [J]. Acta Biomaterialia, 2018, 74: 270–279. DOI: 10.1016/j.actbio.2018.04.031.

[403]

LIU J J, HAI X S, WEI X D. Design the wave attenuation property of nacreous composites [J]. Extreme Mechanics Letters, 2020, 40: 100875. DOI: 10.1016/J.EML.2020.100875.

[404]

TAN C Y, AKIL H M. Impact response of fiber metal laminate sandwich composite structure with polypropylene honeycomb core [J]. Composites Part B: Engineering, 2012, 43(3): 1433–1438. DOI: 10.1016/j.compositesb.2011.08.036.

[405]

SUN G Y, CHEN D D, HUO X T, et al. Experimental and numerical studies on indentation and perforation characteristics of honeycomb sandwich panels [J]. Composite Structures, 2018, 184: 110–124. DOI: 10.1016/j.compstruct.2017.09.025.

[406]

ZHOU Q, LIU S D. Mechanisms of diverting out-of-plane impact to transverse response in plate structures [J]. International Journal of Impact Engineering, 2019, 133: 103346. DOI: 10.1016/j.ijimpeng.2019.103346.

[407]

HA N S, LU G X. Thin-walled corrugated structures: a review of crashworthiness designs and energy absorption characteristics [J]. Thin-Walled Structures, 2020, 157: 106995. DOI: 10.1016/j.tws.2020.106995.

[408]

HUANG W, ZHANG W, YE N, et al. Dynamic response and failure of PVC foam core metallic sandwich subjected to underwater impulsive loading [J]. Composites Part B: Engineering, 2016, 97: 226–238. DOI: 10.1016/j.compositesb.2016.05.015.

[409]

HUANG W, ZHANG W, HUANG X L, et al. Dynamic response of aluminum corrugated sandwich subjected to underwater impulsive loading: experiment and numerical modeling [J]. International Journal of Impact Engineering, 2017, 109: 78–91. DOI: 10.1016/j.ijimpeng.2017.06.002.

[410]

CHEN G C, CHENG Y S, ZHANG P, et al. Contact underwater explosion response of metallic sandwich panels with different face-sheet configurations and core materials [J]. Thin-Walled Structures, 2020, 157: 107126. DOI: 10.1016/j.tws.2020.107126.

[411]

WANG E H, WRIGHT J, SHUKLA A. Analytical and experimental study on the fluid structure interaction during air blast loading [J]. Journal of Applied Physics, 2011, 110(11): 114901. DOI: 10.1063/1.3662948.

[412]

TEICH M, GEBBEKEN N. Analysis of FSI effects of blast loaded flexible structures [J]. Engineering Structures, 2013, 55: 73–79. DOI: 10.1016/j.engstruct.2011.12.003.

[413]

GHOSHAL R, MITRA N. High-intensity air-explosion-induced shock loading of structures: consideration of a real gas in modelling a nonlinear compressible medium [J]. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2015, 471(2176): 20140825. DOI: 10.1098/rspa.2014.0825.

[414]

WANG C, CHEN Z, SILBERSCHMIDT V V, et al. Damage accumulation in braided textiles-reinforced composites under repeated impacts: experimental and numerical studies [J]. Composite Structures, 2018, 204: 256–267. DOI: 10.1016/j.compstruct.2018.07.084.

[415]

GUO K L, ZHU L, LI Y G, et al. Experimental investigation on the dynamic behaviour of aluminum foam sandwich plate under repeated impacts [J]. Composite Structures, 2018, 200: 298–305. DOI: 10.1016/j.compstruct.2018.05.148.

[416]

GUO K L, ZHU L, LI Y, et al. Numerical study on mechanical behavior of foam core sandwich plates under repeated impact loadings [J]. Composite Structures, 2019, 224: 111030. DOI: 10.1016/j.compstruct.2019.111030.

[417]

WU Z Y, SHI L, PAN Z X, et al. Damage assessment of braided composite tube subjected to repeated transverse impact [J]. Thin-Walled Structures, 2020, 156: 107004. DOI: 10.1016/j.tws.2020.107004.

[418]

ZHOU J J, WEN P H, WANG S N. Numerical investigation on the repeated low-velocity impact behavior of composite laminates [J]. Composites Part B: Engineering, 2020, 185: 107771. DOI: 10.1016/j.compositesb.2020.107771.

[419]

ZHANG Y, LI Y G, GUO K L, et al. Dynamic mechanical behaviour and energy absorption of aluminium honeycomb sandwich panels under repeated impact loads [J]. Ocean Engineering, 2021, 219: 108344. DOI: 10.1016/j.oceaneng.2020.108344.

[420]

ZHU L, GUO K L, LI Y G, et al. Experimental study on the dynamic behaviour of aluminium foam sandwich plates under single and repeated impacts at low temperature [J]. International Journal of Impact Engineering, 2018, 114: 123–132. DOI: 10.1016/j.ijimpeng.2017.12.001.

[421]

SUPIAN A B M, SAPUAN S M, ZUHRI M Y M, et al. Effect of winding orientation on energy absorption and failure modes of filament wound kenaf/glass fibre reinforced epoxy hybrid composite tubes under intermediate-velocity impact (IVI) load [J]. Journal of Materials Research and Technology, 2021, 10: 1–14. DOI: 10.1016/j.jmrt.2020.11.103.

[422]

HULL D. Axial crushing of fibre reinforced composite tubes [M]//JONES N, WEIRZBICKI T. Structural Crashworthiness. London: Butterworths, 1983: 118−135.

[423]

TONG Y, XU Y M. Improvement of crash energy absorption of 2D braided composite tubes through an innovative chamfer external triggers [J]. International Journal of Impact Engineering, 2018, 111: 11–20. DOI: 10.1016/j.ijimpeng.2017.08.002.

[424]

KIM J, JEONG M, BÖHM H, et al. Experimental investigation into static and dynamic axial crush of composite tubes of glass-fiber mat/PA6 laminates [J]. Composites Part B: Engineering, 2020, 181: 107590. DOI: 10.1016/j.compositesb.2019.107590.

[425]

GUPTA N K, VELMURUGAN R, GUPTA S K. An analysis of axial crushing of composite tubes [J]. Journal of Composite Materials, 1997, 31(13): 1262–1286. DOI: 10.1177/002199839703101301.

[426]

HANEFI E H, WIERZBICKI T. Axial resistance and energy absorption of externally reinforced metal tubes [J]. Composites Part B: Engineering, 1996, 27(5): 387–394. DOI: 10.1016/1359-8368(96)00002-9.

[427]

SONG H W, WAN Z M, XIE Z M, et al. Axial impact behavior and energy absorption efficiency of composite wrapped metal tubes [J]. International Journal of Impact Engineering, 2000, 24(4): 385–401. DOI: 10.1016/S0734-743X(99)00165-7.

[428]

MAHDI E, HAMOUDA A M S, SEBAEY T A. The effect of fiber orientation on the energy absorption capability of axially crushed composite tubes [J]. Materials and Design (1980-2015), 2014, 56: 923–928. DOI: 10.1016/J.MATDES.2013.12.009.

[429]

MIRZAEI M, SHAKERI M, SADIGHI M, et al. Experimental and analytical assessment of axial crushing of circular hybrid tubes under quasi-static load [J]. Composite Structures, 2012, 94(6): 1959–1966. DOI: 10.1016/j.compstruct.2012.01.003.

[430]

MAMALIS A G, MANOLAKOS D E, DEMOSTHENOUS G A, et al. The static and dynamic axial crumbling of thin-walled fibreglass composite square tubes [J]. Composites Part B: Engineering, 1997, 28(4): 439–451. DOI: 10.1016/S1359-8368(96)00066-2.

[431]

BORIA S, PETTINARI S, GIANNONI F. Theoretical analysis on the collapse mechanisms of thin-walled composite tubes [J]. Composite Structures, 2013, 103: 43–49. DOI: 10.1016/j.compstruct.2013.03.020.

[432]

HUSSEIN R D, RUAN D, LU G X. An analytical model of square CFRP tubes subjected to axial compression [J]. Composites Science and Technology, 2018, 168: 170–178. DOI: 10.1016/j.compscitech.2018.09.019.

[433]

邢运, 杨嘉陵. 动物进化的抗冲击策略及其仿生机理研究 [J]. 力学进展, 2021, 51(2): 295–341. DOI: 10.6052/1000-0992-20-027.

XING Y, YANG J L. Research progress of impact-resistance strategies and biomimetic mechanism in animal evolution [J]. Advances in Mechanics, 2021, 51(2): 295–341. DOI: 10.6052/1000-0992-20-027.

[434]

LAZARUS B S, VELASCO-HOGAN A, GÓMEZ-DEL RÍO T, et al. A review of impact resistant biological and bioinspired materials and structures [J]. Journal of Materials Research and Technology, 2020, 9(6): 15705–15738. DOI: 10.1016/j.jmrt.2020.10.062.

[435]

HA N S, LU G X. A review of recent research on bio-inspired structures and materials for energy absorption applications [J]. Composites Part B: Engineering, 2020, 181: 107496. DOI: 10.1016/j.compositesb.2019.107496.

[436]

CHEN J X, XIE J, WU Z S, et al. Review of beetle forewing structures and their biomimetic applications in China: Ⅰ: on the structural colors and the vertical and horizontal cross-sectional structures [J]. Materials Science and Engineering: C, 2015, 55: 605–619. DOI: 10.1016/j.msec.2015.05.064.

[437]

COMSTOCK J H, NEEDHAM J G. The wings of insects [J]. The American Naturalist, 1899, 33(395): 845–860. DOI: 10.1086/277462.

[438]

VINCENT J F. Insect cuticle: a paradigm for natural composites [J]. Symposia of the Society for Experimental Biology, 1980, 34: 183–210.

[439]

CHEN J X, XIE J, ZHU H, et al. Integrated honeycomb structure of a beetle forewing and its imitation [J]. Materials Science and Engineering: C, 2012, 32(3): 613–618. DOI: 10.1016/j.msec.2011.12.020.

[440]

CHEN J X, GU C L, GUO S J, et al. Integrated honeycomb technology motivated by the structure of beetle forewings [J]. Materials Science and Engineering: C, 2012, 32(7): 1813–1817. DOI: 10.1016/j.msec.2012.04.067.

[441]

XIANG J W, DU J X, LI D C, et al. Functional morphology and structural characteristics of wings of the ladybird beetle, Coccinella septempunctata (L.): wings of the ladybird beetle [J]. Microscopy Research and Technique, 2016, 79(6): 550–556. DOI: 10.1002/jemt.22669.

[442]

LOMAKIN J, HUBER P A, EICHLER C, et al. Mechanical properties of the beetle elytron, a biological composite material [J]. Biomacromolecules, 2011, 12(2): 321–335. DOI: 10.1021/bm1009156.

[443]

CHEN J X, DAI G Z, XU Y L, et al. Basic study of biomimetic composite materials in the forewings of beetles [J]. Materials Science and Engineering: A, 2008, 483−484: 625–628. DOI: 10.1016/j.msea.2006.09.180.

[444]

HAO P, DU J X. Energy absorption characteristics of bio-inspired honeycomb column thin-walled structure under impact loading [J]. Journal of the Mechanical Behavior of Biomedical Materials, 2018, 79: 301–308. DOI: 10.1016/j.jmbbm.2018.01.001.

[445]

PATEK S N, KORFF W L, CALDWELL R L. Deadly strike mechanism of a mantis shrimp [J]. Nature, 2004, 428(6985): 819–820. DOI: 10.1038/428819a.

[446]

YARAGHI N A, KISAILUS D. Biomimetic structural materials: inspiration from design and assembly [J]. Annual Review of Physical Chemistry, 2018, 69: 23–57. DOI: 10.1146/annurev-physchem-040215-112621.

[447]

AMINI S, TADAYON M, IDAPALAPATI S, et al. The role of quasi-plasticity in the extreme contact damage tolerance of the stomatopod dactyl club [J]. Nature Materials, 2015, 14(9): 943–950. DOI: 10.1038/nmat4309.

[448]

GRUNENFELDER L K, MILLIRON G, HERRERA S, et al. Ecologically driven ultrastructural and hydrodynamic designs in stomatopod cuticles [J]. Advanced Materials, 2018, 30(9): 1705295. DOI: 10.1002/adma.201705295.

[449]

WEAVER J C, MILLIRON G W, MISEREZ A, et al. The stomatopod dactyl club: a formidable damage-tolerant biological hammer [J]. Science, 2012, 336(6086): 1275–1280. DOI: 10.1126/science.1218764.

[450]

YARAGHI N A, GUARÍN-ZAPATA N, GRUNENFELDER L K, et al. A sinusoidally architected helicoidal biocomposite [J]. Advanced Materials, 2016, 28(32): 6835–6844. DOI: 10.1002/adma.201600786.

[451]

HUANG W, SHISHEHBOR M, GUARÍN-ZAPATA N, et al. A natural impact-resistant bicontinuous composite nanoparticle coating [J]. Nature Materials, 2020, 19(11): 1236–1243. DOI: 10.1038/s41563-020-0768-7.

[452]

MAY P R A, FUSTER J M, HABER J, et al. Woodpecker drilling behavior: an endorsement of the rotational theory of impact brain injury [J]. Archives of Neurology, 1979, 36(6): 370–373. DOI: 10.1001/archneur.1979.00500420080011.

[453]

WANG L Z, CHEUNG J T M, PU F, et al. Why do woodpeckers resist head impact injury: a biomechanical investigation [J]. PLoS One, 2011, 6(10): e26490. DOI: 10.1371/journal.pone.0026490.

[454]

WANG L Z, ZHANG H Q, FAN Y B. Comparative study of the mechanical properties, micro-structure, and composition of the cranial and beak bones of the great spotted woodpecker and the lark bird [J]. Science China Life Sciences, 2011, 54(11): 1036–1041. DOI: 10.1007/s11427-011-4242-2.

[455]

LEE N, HORSTEMEYER M F, RHEE H, et al. Hierarchical multiscale structure-property relationships of the red-bellied woodpecker (Melanerpes carolinus) beak [J]. Journal of the Royal Society Interface, 2014, 11(96): 20140274. DOI: 10.1098/RSIF.2014.0274.

[456]

LIU Z Q, ZHANG Z F, RITCHIE R O. On the materials science of nature’s arms race [J]. Advanced Materials, 2018, 30(32): 1705220. DOI: 10.1002/adma.201705220.

[457]

LIU Y Z, QIU X M, MA H L, et al. A study of woodpecker’s pecking process and the impact response of its brain [J]. International Journal of Impact Engineering, 2017, 108: 263–271. DOI: 10.1016/j.ijimpeng.2017.05.016.

[458]

JUNG J Y, NALEWAY S E, YARAGHI N A, et al. Structural analysis of the tongue and hyoid apparatus in a woodpecker [J]. Acta Biomaterialia, 2016, 37: 1–13. DOI: 10.1016/j.actbio.2016.03.030.

[459]

JUNG J Y, PISSARENKO A, TRIKANAD A A, et al. A natural stress deflector on the head? Mechanical and functional evaluation of the woodpecker skull bones [J]. Advanced Theory and Simulations, 2019, 2(4): 1800152. DOI: 10.1002/adts.201800152.

[460]

NEUMANN M, HERTER J, DROSTE B O, et al. Compressive behaviour of axially loaded spruce wood under large deformations at different strain rates [J]. European Journal of Wood and Wood Products, 2011, 69(3): 345–357. DOI: 10.1007/s00107-010-0442-x.

[461]

EISENACHER G, SCHEIDEMANN R, NEUMANN M, et al. Dynamic crushing characteristics of spruce wood under large deformations [J]. Wood Science and Technology, 2013, 47(2): 369–380. DOI: 10.1007/s00226-012-0508-5.

[462]

WOUTS J, HAUGOU G, OUDJENE M, et al. Strain rate effects on the compressive response of wood and energy absorption capabilities: Part A: experimental investigations [J]. Composite Structures, 2016, 149: 315–328. DOI: 10.1016/j.compstruct.2016.03.058.

[463]

WOUTS J, HAUGOU G, OUDJENE M, et al. Strain rate effects on the compressive response of wood and energy absorption capabilities: Part B: experimental investigation under rigid lateral confinement [J]. Composite Structures, 2018, 204: 95–104. DOI: 10.1016/j.compstruct.2018.07.001.

[464]

HEPWORTH D G, VINCENT J F, STRINGER G, et al. Variations in the morphology of wood structure can explain why hardwood species of similar density have very different resistances to impact and compressive loading [J]. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2002, 360(1791): 255–272. DOI: 10.1098/rsta.2001.0927.

[465]

MATSUSHITA A K, GONZALEZ D, WANG M, et al. Beyond density: mesostructural features of impact resistant wood [J]. Materials Today Communications, 2020, 22: 100697. DOI: 10.1016/J.MTCOMM.2019.100697.

[466]

GROSS J, TIMBERG R, GRAEF M. Pigment and ultrastructural changes in the developing pummelo Citrus grandis ‘Goliath’ [J]. Botanical Gazette, 1983, 144(3): 401–406. DOI: 10.1086/337389.

[467]

MORTON J F. Fruits of warm climates [M]. Miami: Creative Resource Systems Inc, 1987.

[468]

FISCHER S F, THIELEN M, LOPRANG R R, et al. Pummelos as concept generators for biomimetically inspired low weight structures with excellent damping properties [J]. Advanced Engineering Materials, 2010, 12(12): B658–B663. DOI: 10.1002/adem.201080065.

[469]

BÜHRIG-POLACZEK A, FLECK C, SPECK T, et al. Biomimetic cellular metals: using hierarchical structuring for energy absorption [J]. Bioinspiration and Biomimetics, 2016, 11(4): 045002. DOI: 10.1088/1748-3190/11/4/045002.

[470]

THIELEN M, SPECK T, SEIDEL R. The ecological relevance of the pomelo (Citrus maxima) peel acting as an effective impact protection [C]//Proceedings of the 7th Plant Biomechanics International Conference. Clermont-Ferrand, France, 2012.

[471]

THIELEN M, SPECK T, SEIDEL R. Viscoelasticity and compaction behaviour of the foam-like pomelo (Citrus maxima) peel [J]. Journal of Materials Science, 2013, 48(9): 3469–3478. DOI: 10.1007/s10853-013-7137-8.

[472]

WANG B, PAN B, LUBINEAU G. Morphological evolution and internal strain mapping of pomelo peel using X-ray computed tomography and digital volume correlation [J]. Materials and Design, 2018, 137: 305–315. DOI: 10.1016/J.MATDES.2017.10.038.

[473]

THIELEN M, SCHMITT C N Z, ECKERT S, et al. Structure-function relationship of the foam-like pomelo peel (Citrus maxima): an inspiration for the development of biomimetic damping materials with high energy dissipation [J]. Bioinspiration and Biomimetics, 2013, 8(2): 025001. DOI: 10.1088/1748-3182/8/2/025001.

[474]

HA N S, LU G X, SHU D W, et al. Mechanical properties and energy absorption characteristics of tropical fruit durian (Durio zibethinus) [J]. Journal of the Mechanical Behavior of Biomedical Materials, 2020, 104: 103603. DOI: 10.1016/j.jmbbm.2019.103603.

[475]

GLUDOVATZ B, WALSH F, ZIMMERMANN E A, et al. Multiscale structure and damage tolerance of coconut shells [J]. Journal of the Mechanical Behavior of Biomedical Materials, 2017, 76: 76–84. DOI: 10.1016/j.jmbbm.2017.05.024.

[476]

DARDICK C, CALLAHAN A M. Evolution of the fruit endocarp: molecular mechanisms underlying adaptations in seed protection and dispersal strategies [J]. Frontiers in Plant Science, 2014, 5: 284. DOI: 10.3389/fpls.2014.00284.

[477]

VINCENT J. Structural biomaterials [M]. 3rd ed. Princeton: Princeton University Press, 2012.

[478]

NGUYEN X T, HOU S J, LIU T Q, et al. A potential natural energy absorption material: coconut mesocarp: Part A: experimental investigations on mechanical properties [J]. International Journal of Mechanical Sciences, 2016, 115-116: 564–573. DOI: 10.1016/j.ijmecsci.2016.07.017.

[479]

LU C H, HOU S J, ZHANG Z Y, et al. The mystery of coconut overturns the crashworthiness design of composite materials [J]. International Journal of Mechanical Sciences, 2020, 168: 105244. DOI: 10.1016/j.ijmecsci.2019.105244.

[480]

SCHMIER S, HOSODA N, SPECK T. Hierarchical structure of the Cocos nucifera (Coconut) endocarp: functional morphology and its influence on fracture toughness [J]. Molecules, 2020, 25(1): 223. DOI: 10.3390/molecules25010223.

[481]

SHARAN S, RAIJIWALA D B. Abrasion and drop weight impact resistance of coconut shell ash concrete [J]. International Journal of Civil Engineering and Technology, 2017, 8(2): 383–389.

[482]

GUNASEKARAN K, KUMAR P S, LAKSHMIPATHY M. Mechanical and bond properties of coconut shell concrete [J]. Construction and Building Materials, 2011, 25(1): 92–98. DOI: 10.1016/j.conbuildmat.2010.06.053.

[483]

LIU T Q, HOU S J, NGUYEN X, et al. Energy absorption characteristics of sandwich structures with composite sheets and bio coconut core [J]. Composites Part B: Engineering, 2017, 114: 328–338. DOI: 10.1016/j.compositesb.2017.01.035.

[484]

XIANG J W, DU J X. Energy absorption characteristics of bio-inspired honeycomb structure under axial impact loading [J]. Materials Science and Engineering: A, 2017, 696: 283–289. DOI: 10.1016/j.msea.2017.04.044.

[485]

HA N S, LU G X, XIANG X M. Energy absorption of a bio-inspired honeycomb sandwich panel [J]. Journal of Materials Science, 2019, 54(8): 6286–6300. DOI: 10.1007/s10853-018-3163-x.

[486]

TSANG H H, TSE K M, CHAN K Y, et al. Energy absorption of muscle-inspired hierarchical structure: experimental investigation [J]. Composite Structures, 2019, 226: 111250. DOI: 10.1016/j.compstruct.2019.111250.

[487]

ZHANG Z Q, ZHANG Y W, GAO H J. On optimal hierarchy of load-bearing biological materials [J]. Proceedings of the Royal Society B: Biological Sciences, 2011, 278(1705): 519–525. DOI: 10.1098/rspb.2010.1093.

[488]

CHEN Y Y, JIA Z A, WANG L F. Hierarchical honeycomb lattice metamaterials with improved thermal resistance and mechanical properties [J]. Composite Structures, 2016, 152: 395–402. DOI: 10.1016/j.compstruct.2016.05.048.

[489]

HALDAR S, BRUCK H A. Mechanics of composite sandwich structures with bioinspired core [J]. Composites Science and Technology, 2014, 95: 67–74. DOI: 10.1016/j.compscitech.2014.02.011.

[490]

王海任, 李世强, 刘志芳, 等. 爆炸载荷下双向梯度仿生夹芯圆板的力学行为 [J]. 爆炸与冲击, 2021, 41(4): 043201. DOI: 10.11883/bzycj-2020-0132.

WANG H R, LI S Q, LIU Z F, et al. Mechanical behaviors of bi-directional gradient bio-inspired circular sandwich plates under blast loading [J]. Explosion and Shock Waves, 2021, 41(4): 043201. DOI: 10.11883/bzycj-2020-0132.

[491]

CHENG L, THOMAS A, GLANCEY J L, et al. Mechanical behavior of bio-inspired laminated composites [J]. Composites Part A: Applied Science and Manufacturing, 2011, 42(2): 211–220. DOI: 10.1016/j.compositesa.2010.11.009.

[492]

ZIMMERMANN E A, GLUDOVATZ B, SCHAIBLE E, et al. Mechanical adaptability of the Bouligand-type structure in natural dermal armour [J]. Nature Communications, 2013, 4(1): 2634. DOI: 10.1038/ncomms3634.

[493]

NIKOLOV S, PETROV M, LYMPERAKIS L, et al. Revealing the design principles of high-performance biological composites using ab initio and multiscale simulations: the example of lobster cuticle [J]. Advanced Materials, 2010, 22(4): 519–526. DOI: 10.1002/adma.200902019.

[494]

GRUNENFELDER L K, SUKSANGPANYA N, SALINAS C, et al. Bio-inspired impact-resistant composites [J]. Acta Biomaterialia, 2014, 10(9): 3997–4008. DOI: 10.1016/j.actbio.2014.03.022.

[495]

GINZBURG D, PINTO F, IERVOLINO O, et al. Damage tolerance of bio-inspired helicoidal composites under low velocity impact [J]. Composite Structures, 2017, 161: 187–203. DOI: 10.1016/j.compstruct.2016.10.097.

[496]

YIN S, CHEN H Y, YANG R H, et al. Tough nature-inspired helicoidal composites with printing-induced voids [J]. Cell Reports Physical Science, 2020, 1(7): 100109. DOI: 10.1016/j.xcrp.2020.100109.

[497]

YIN S, YANG R H, HUANG Y, et al. Toughening mechanism of coelacanth-fish-inspired double-helicoidal composites [J]. Composites Science and Technology, 2021, 205: 108650. DOI: 10.1016/j.compscitech.2021.108650.

[498]

YIN S, GUO W H, WANG H T, et al. Strong and tough bioinspired additive-manufactured dual-phase mechanical metamaterial composites [J]. Journal of the Mechanics and Physics of Solids, 2021, 149: 104341. DOI: 10.1016/j.jmps.2021.104341.

[499]

LIU J L, SINGH A K, LEE H P, et al. The response of bio-inspired helicoidal laminates to small projectile impact [J]. International Journal of Impact Engineering, 2020, 142: 59–70. DOI: 10.1016/j.ijimpeng.2020.103608.

[500]

ABIR M R, TAY T E, LEE H P. On the improved ballistic performance of bio-inspired composites [J]. Composites Part A: Applied Science and Manufacturing, 2019, 123: 59–70. DOI: 10.1016/j.compositesa.2019.04.021.

Progress in structural impact dynamics during 2010−2020

doi: 10.11883/bzycj-2021-0113

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Progress in structural impact dynamics during 2010−2020

doi: 10.11883/bzycj-2021-0113

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Export File

Citation

Format

Content