摘要:
铝基复合泡沫在冲击防护和高温服役结构中具有良好的应用潜力,但其在高温和高应变率耦合作用下的承载退化及内部损伤演化仍缺乏系统认识。为此,本文以孔隙率为43%和53%的粉煤灰/2024铝基复合泡沫为研究对象,开展了室温下0.001~2200 s−1的压缩实验和2200 s−1下25~500℃的动态压缩实验,并结合原位计算机断层扫描(CT)、同步辐射高速原位成像等多尺度表征技术,系统分析了材料的宏观力学响应与细观损伤演化。结果表明:随应变率升高,材料的峰值应力和平台应力均显著提高,表现出明显的应变率效应;随温度升高,铝合金基体软化导致材料强度下降,但空心微球在一定程度上抑制了高温软化,使铝基复合泡沫在动态加载下的温度敏感性低于泡沫铝。与43%孔隙率试样相比,53%孔隙率试样的应变率敏感性更强、温度敏感性更低,且动态温度敏感指数低于准静态。原位CT及同步辐射成像结果表明,43%孔隙率试样在准静态和动态加载下均以集中式单剪切带为主导损伤模式;53%孔隙率试样则随加载条件发生变化,准静态下呈现弱连续性的斜向局部化压溃,动态加载下发展为更显著的多区域应变集中、逐步坍塌和分散压溃,表现出更强的微惯性效应。高温动态回收试样的微观表征表明,温度升高促进基体塑性流动、球壳碎片嵌入和孔隙压实,使主导损伤机制由空心微球脆性破碎逐渐转向基体塑性流动,进一步增强了碎片的微惯性效应。综上,微惯性效应是连接孔隙率、温度与宏观强度的关键纽带。研究结果可为铝基复合泡沫在冲击、高温及复杂服役环境下的结构设计与性能调控提供理论依据。
Abstract:
Aluminum matrix syntactic foams (AMSFs) exhibit considerable potential for impact protection and structural applications under elevated-temperature conditions. However, their mechanical response and internal damage evolution under the coupled effects of high strain rates and elevated temperatures remain insufficiently understood. In this study, AMSFs with porosities of 43% and 53% were fabricated by pressure infiltration using 2024 aluminum alloy as the matrix and fly ash cenospheres (FACS) as the filler. The FACS were relatively uniformly distributed within the matrix, with an average diameter of approximately 180 μm. Compression tests were conducted at room temperature over a strain-rate range of 0.001~2200 s⁻¹, together with dynamic compression tests at approximately 2200 s⁻¹ and temperatures ranging from 25 to 500°C. Multiscale characterization techniques, including in situ X-ray computed tomography (CT), synchrotron-based high-speed X-ray imaging, and digital image correlation (DIC), were employed to investigate the macroscopic mechanical response and mesoscale damage evolution. The results show that both peak stress and plateau stress increase markedly with increasing strain rate, whereas increasing temperature reduces the material strength primarily due to thermal softening of the aluminum alloy matrix. Compared with the 43% porosity foam, the 53% porosity foam exhibits higher strain-rate sensitivity but lower temperature sensitivity. Energy absorption analysis further indicates that the specific energy absorption (SEA) generally increases with strain rate but decreases with increasing temperature, while the ideal energy absorption efficiency remains approximately 0.6~0.8 over a wide deformation range. In situ CT and synchrotron imaging reveal distinct porosity-dependent damage modes. The 43% porosity foam exhibits pronounced shear, localization under both quasi-static and dynamic loading, whereas the 53% porosity foam shows less continuous inclined localization under quasi-static loading and more distributed multi-zone crushing under dynamic loading. Microstructural observations of dynamically recovered specimens reveal that increasing temperature promotes matrix plastic flow, shell-fragment embedding, and pore compaction, indicating a transition from brittle cenosphere fracture toward more pronounced matrix plastic deformation. Based on these findings, a modified Johnson–Cook (J–C) model incorporating matrix strain hardening, FACS fracture-induced softening, strain-rate strengthening, micro-inertia effects, and thermal softening was developed. The model effectively captures the compressive responses under different strain-rate and temperature conditions, with overall R² values of 0.868 and 0.916 for the 43% and 53% porosity foams, respectively. These findings provide insights into the relationships among mechanical response, energy absorption, and mesoscale damage evolution, supporting the constitutive modeling and structural design of AMSFs under impact and elevated-temperature conditions.