基于“钉床型”飞片的斜波加载技术及应用

宗泽; 王刚; 方嘉铖; 林茜; 王永刚

doi:10.11883/bzycj-2020-0391

基于“钉床型”飞片的斜波加载技术及应用

doi: 10.11883/bzycj-2020-0391

宁波大学冲击与安全工程教育部重点实验室，浙江宁波 315211

基金项目: 国家自然科学基金（11972202）；科学挑战专题（TZ2018001）；冲击波物理与爆轰物理重点实验室稳定支持项目（JCKYS2019212009）

详细信息

作者简介:
宗　泽（1995－　），男，硕士研究生，1085802353@qq.com

通讯作者:
王永刚（1976－　），男，博士，教授，wangyonggang@nbu.edu.cn

中图分类号: O347.3
计量
- 文章访问数: 637
- HTML全文浏览量: 285
- PDF下载量: 58
- 被引次数: 0
出版历程
- 收稿日期: 2020-10-15
- 修回日期: 2021-01-24
- 网络出版日期: 2021-04-14
- 刊出日期: 2021-04-14

Ramp wave loading technique and application using a “bed of nails” flyer system

Key Laboratory of Impact and Safety Engineering, Ministry of Education of China,Ningbo University, Ningbo 315211, Zhejiang, China

摘要

摘要: 为了实现斜波加载，设计了一种“钉床型”广义波阻抗梯度飞片，即在基座上密排叠加许多小圆锥，简称“钉床型”飞片。该飞片采用激光选区熔化金属增材制造技术进行制备。利用一级轻气炮加载装置和全光纤激光位移干涉测试系统，开展不同工况下“钉床型”飞片高速击靶压缩实验和层裂实验，重点讨论小圆锥高度和撞击速度对斜波压缩加载波形的影响规律，以及斜波加载对不锈钢靶板层裂特性的影响。实验结果显示：（1）“钉床型”飞片对靶板产生的压缩是逐步的，从自由面速度剖面上观察到压缩波上升前沿时间被显著延长，形成了斜波波阵面，明显不同于冲击压缩的陡峭波阵面；（2）在飞片击靶速度近似恒定条件下，斜波波阵面的上升沿时间、平台速度峰值都明显依赖于“钉床型”飞片上的小圆锥高度，随着小圆锥高度增大，上升沿时间呈线性增大，而平台速度峰值呈线性减小；（3）在“钉床型”飞片的几何尺寸保持不变的条件下，斜波波阵面的上升沿时间随着飞片击靶速度的增大而线性减小，平台速度峰值则线性增大；（4）与冲击加载相比，“钉床型”飞片产生的斜波加载不会对材料的层裂强度产生明显影响，但对材料内部损伤演化速率有一定的影响。
- 斜波加载 /
- “钉床型”飞片 /
- 金属增材制造技术 /
- 层裂
Abstract: In order to generate a ramp wave loading, a generalized wave impedance gradient (GWIG) flyer was designed by a solid disc as a base for arrays of cone spikes, termed the “bed of nails” flyer. The “bed of nails” flyer was fabricated by Selective Laser Metaling additive manufacturing. Using a single-stage light-gas gun and a displacement interferometer system for any reflector (DISAR), a series of plate impact and spallation experiments using “bed of nails” flyer impact were performed. The effects of the height of cone and impact velocity on the ramp wave loading profiles and the effects of ramp wave loading on spallation characteristics of stainless-steel target were discussed. The experimental results show that: (1) From the free surface velocity profiles measured by DISAR, it is observed that the rising edge time of the compression wave is significantly prolonged, and the ramp wave loading is formed, which is obviously different from the steep wave front of the usual shock compression; (2) When the impact velocity of the flyer is approximately constant, both the rising edge time and the peak velocity of the ramp wave loading obviously depend on the cone height of the“bed of nails” flyer, with the increase of the height of the small cone, the rising edge time increases linearly, while the peak velocity decreases linearly; (3) When the geometric size of the “bed of nails” flyer remains unchanged, with the increase of the flyer’s velocity, the rising edge time of the ramp wave loading decreases linearly, while the peak velocity increases linearly; (4) Comparing with shock wave loading, the ramp wave loading generated by the “bed of nails” flyer has no obvious effect on the spallation strength of the stainless-steel, but has an influence on the damage evolution rate.
- ramp wave loading /
- “bed of nails” flyer /
- additive manufacture technique /
- spallation

HTML全文

图 1 “钉床型”广义波阻抗梯度飞片几何结构示意图

Figure 1. Schematic diagram of the“bed of nails” generalized wave impedance gradient flyer

下载: 全尺寸图片幻灯片

图 2 不同时刻靶板内应力波传播云图^[27]

Figure 2. Stress wave propagation contours in the specimen at different times^[27]

下载: 全尺寸图片幻灯片

图 3 采用金属增材制造工艺制备完成的三种不同圆锥高度的“钉床型”飞片

Figure 3. The“bed of nails” flyers with the different heights of cone produced by additive manufacturing technique

下载: 全尺寸图片幻灯片

图 4 轻气炮实验装置示意图

Figure 4. Schematic of the gas gun device

下载: 全尺寸图片幻灯片

图 5 安装在铝合金弹托上的飞片

Figure 5. Flyer fixed on aluminum alloy sabot

下载: 全尺寸图片幻灯片

图 6 在不同锥高条件下不锈钢和纯铜靶板的自由面速度时程曲线

Figure 6. Free surface velocity profiles of the stainless-steel and copper targets under different heights of the cone

下载: 全尺寸图片幻灯片

图 7 自由面速度剖面上的上升沿时间和平台峰值速度随锥高的变化曲线

Figure 7. Rising edge time and peak velocity of free surface velocity profiles as a function of the height of the cone

下载: 全尺寸图片幻灯片

图 8 不同撞击速度下不锈钢靶板自由面速度时程曲线

Figure 8. Free surface velocity profiles of stainless-steel target at different impact velocities

下载: 全尺寸图片幻灯片

图 9 上升沿时间和平台速度峰值与撞击速度比值随撞击速度的变化曲线

Figure 9. Rising edge time and ratio of peak velocity to impact velocity as a function of impact velocities

下载: 全尺寸图片幻灯片

图 10 层裂实验中实测的不锈钢靶板自由面速度时程曲线

Figure 10. Free surface velocity profiles measured by DISAR of stainless-steel targets in spallation

下载: 全尺寸图片幻灯片

图 11 不同锥高条件下软回收的不锈钢靶板内部损伤分布

Figure 11. Damage distribution of recovered stainless-steel targets at different heights of the cone

下载: 全尺寸图片幻灯片

图 12 初始损伤不锈钢靶板上损伤的局部放大显微照片

Figure 12. Enlarged damage distribution image of the damaged stainless-steel target

下载: 全尺寸图片幻灯片

表 1 不锈钢靶层裂实验结果

Table 1. Experimental results on spallation of stainless-steel target

实验编号	h₁/mm	${{\dot u}_1}$/（m·s⁻²）	${{\dot u}_2}$/（m·s⁻²）	$\Delta u$/（m·s⁻¹）	${\dot \varepsilon }$/s⁻¹	${\sigma _{\rm s}}$/GPa
1	0	26.8×10⁷	6.63×10⁷	122.1	3.40×10⁴	2.15
2	0.5	24.8×10⁷	4.97×10⁷	122.4	3.15×10⁴	2.16
3	1.5	21.1×10⁷	3.16×10⁷	123.2	2.68×10⁴	2.17

下载: 导出CSV

参考文献(30)

[1]	沈强, 王传彬, 张联盟, 等. 为实现准等熵压缩的波阻抗梯度飞片的实验研究 [J]. 物理学报, 2002, 51(8): 1759–1763. DOI: 10.3321/j.issn: 1000-3290.2002.08.019. SHEN Q, WANG C B, ZHANG L M, et al. A study on generating quasi-isentropic compression via graded impedance flyer [J]. Acta Physica Sinica, 2002, 51(8): 1759–1763. DOI: 10.3321/j.issn: 1000-3290.2002.08.019.
[2]	LUO B Q, JIN Y S, LI M, et al. Direct calculation of sound speed of materials under ramp wave compression [J]. AIP Advances, 2018, 8(11): 115024. DOI: 10.1063/1.5047479.
[3]	经福谦, 陆景德, 刘仓理. 斜波发生器的设计准则 [J]. 高压物理学报, 1987, 1(1): 7–12. DOI: 10.11858/gywlxb.1987.01.002. JING F Q, LU J D, LIU C L. Design criterion for ramp wave generator [J]. Chinese Journal of High Pressure Physics, 1987, 1(1): 7–12. DOI: 10.11858/gywlxb.1987.01.002.
[4]	HALL C A, ASAY J R, KNUDSON M D, et al. Experimental configuration for isentropic compression of solids using pulsed magnetic loading [J]. Review of Scientific Instruments, 2001, 72(9): 3587–3595. DOI: 10.1063/1.1394178.
[5]	LEMKE R W, DOLAN D H, DALTON D G, et al. Probing off-Hugoniot states in Ta, Cu, and Al to 1 000 GPa compression with magnetically driven liner implosions [J]. Journal of Applied Physics, 2016, 119(1): 015904. DOI: 10.1063/1.4939675.
[6]	BROWN J L, ALEXANDER C S, ASAY J R, et al. Extracting strength from high pressure ramp-release experiments [J]. Journal of Applied Physics, 2013, 114(22): 223518. DOI: 10.1063/1.4847535.
[7]	EDWARDS J, LORENZ K T, REMINGTON B A, et al. Laser-driven plasma loader for shockless compression and acceleration of samples in the solid state [J]. Physical Review Letters, 2004, 92(7): 075002. DOI: 10.1103/PhysRevLett.92.075002.
[8]	王峰, 彭晓世, 单连强, 等. 基于神光Ⅲ原型装置的激光加载条件下准等熵压缩实验研究进展 [J]. 物理学报, 2014, 63(18): 185202. DOI: 10.7498/aps.63.185202. WANG F, PENG X S, SHAN L Q, et al. Experimental progress of quasi-isentropic compression under drive condition of Shen Guang-Ⅲ prototype laser facility [J]. Acta Physica Sinica, 2014, 63(18): 185202. DOI: 10.7498/aps.63.185202.
[9]	YEP S J, BELOF J L, ORLIKOWSKI D A, et al. Fabrication and application of high impedance graded density impactors in light gas gun experiments [J]. The Review of Scientific Instruments, 2013, 84(10): 103909. DOI: 10.1063/1.4826565.
[10]	LUO G Q, BAI J S, TAN H, et al. Characterizations of Mg-W system graded-density impactors for complex loading experiments [J]. Metallurgical and Materials Transactions A, 2010, 41(9): 2389–2395. DOI: 10.1007/s11661-010-0309-0.
[11]	SMITH R F, EGGERT J H, JEANLOZ R, et al. Ramp compression of diamond to five terapascals [J]. Nature, 2014, 511(7509): 330–333. DOI: 10.1038/nature13526.
[12]	孙承纬, 赵剑衡, 王桂吉, 等. 磁驱动准等熵平面压缩和超高速飞片发射实验技术原理、装置及应用 [J]. 力学进展, 2012, 42(2): 206–219. DOI: 10.6052/1000-0992-2012-2-20120208. SUN C W, ZHAO J H, WANG G J, et al. Progress in magnetic loading techniques for isentropic compression experiments and ultra-high velocity flyer launching [J]. Advances in Mechanics, 2012, 42(2): 206–219. DOI: 10.6052/1000-0992-2012-2-20120208.
[13]	WANG G J, LUO B Q, ZHANG X P, et al. A 4 MA, 500 ns pulsed power generator CQ-4 for characterization of material behaviors under ramp wave loading [J]. Review of Scientific Instruments, 2013, 84(1): 015117. DOI: 10.1063/1.4788935.
[14]	ZHANG X P, WANG G J, ZHAO J H, et al. High velocity flyer plates launched by magnetic pressure on pulsed power generator CQ-4 and applied in shock Hugoniot experiments [J]. Review of Scientific Instruments, 2014, 85(5): 055110. DOI: 10.1063/1.4875705.
[15]	ZHANG X P, LUO B Q, WU G, et al. Yield behavior of polystyrene at strain rate 10⁶ s⁻¹ under quasi-isentropic compression [J]. Mechanics of Materials, 2018, 124: 1–6. DOI: 10.1016/j.mechmat.2018.05.003.
[16]	BARKER L M, SCOTT D D. Development of a high-pressure quasi-isentropic plane wave generating capability: SAN84-0432 [R]. Albuquerque: Sandia National Labs, 1984.
[17]	CHHABILDAS L C, KMETYK L N, REINHART W D, et al. Enhanced hypervelocity launcher-capabilities to 16 km/s [J]. International Journal of Impact Engineering, 1995, 17(1–3): 183–194. DOI: 10.1016/0734-743x(95)99845-i.
[18]	DAVIS J P. Experimental measurement of the principal isentrope for aluminum 6061-T6 to 240 GPa [J]. Journal of Applied Physics, 2006, 99(10): 103512. DOI: 10.1063/1.2196110.
[19]	WINTER R E, COTTON M, HARRIS E J, et al. Plate-impact loading of cellular structures formed by selective laser melting [J]. Modelling and Simulation in Materials Science and Engineering, 2014, 22(2): 025021. DOI: 10.1088/0965-0393/22/2/025021.
[20]	WINTER R E, COTTON M, HARRIS E J, et al. A novel graded density impactor [J]. Journal of Physics: Conference Series, 2014, 500(14): 142034. DOI: 10.1088/1742-6596/500/14/142034.
[21]	TAYLOR P, GOFF M, HAZELL P J, et al. Ramp wave generation using graded areal density ceramic flyers and the plate impact technique [J]. Journal of Physics: Conference Series, 2014, 500(14): 142016. DOI: 10.1088/1742-6596/500/14/142016.
[22]	GOFF M, HAZELL P J, APPLEBY-THOMAS G J, et al. Gas gun ramp loading of Kel-F 81 targets using a ceramic graded areal density flyer system [J]. International Journal of Impact Engineering, 2015, 80: 152–161. DOI: 10.1016/j.ijimpeng.2015.02.010.
[23]	张家莲, 李发亮, 张海军. 选区激光熔化技术制备金属材料研究进展 [J]. 激光与光电子学进展, 2019, 56(10): 35–44. DOI: 10.3788/LOP56.100003. ZHANG J L, LI F L, ZHANG H J. Research progress on preparation of metallic materials by selective laser melting [J]. Laser & Optoelectronics Progress, 2019, 56(10): 35–44. DOI: 10.3788/LOP56.100003.
[24]	王礼立, 胡时胜. 锥杆中应力波传播的放大特性 [J]. 宁波大学学报, 1985, 1(1): 69–78. WANG L L, HU S S. The amplification of stress waves propagated in a conical bar [J]. Journal of Ningbo University, 1985, 1(1): 69–78.
[25]	张方举, 陶俊林, 田常津. 变截面弹丸在分离式Hopkinson压杆中的应用 [J]. 实验力学, 2003, 18(1): 137–140. DOI: 10.3969/j.issn.1001-4888.2003.01.025. ZHANG F J, TAO J L, TIAN C J. Application of cone-cylinder projectiles in split Hopkinson pressure bar test [J]. Journal of Experimental Mechanics, 2003, 18(1): 137–140. DOI: 10.3969/j.issn.1001-4888.2003.01.025.
[26]	陈子博, 谢普初, 刘东升, 等. 基于广义波阻抗梯度飞片的准等熵压缩技术 [J]. 爆炸与冲击, 2019, 39(4): 041406. DOI: 10.11883/bzycj-2018-0407. CHEN Z B, XIE P C, LIU D S, et al. Quasi-isentropic compression technique based on generalized wave impedance gradient flyer [J]. Explosion and Shock Waves, 2019, 39(4): 041406. DOI: 10.11883/bzycj-2018-0407.
[27]	WENG J D, TAN H, WANG X, et al. Optical-fiber interferometer for velocity measurements with picosecond resolution [J]. Applied Physics Letters, 2006, 89(11): 111101. DOI: 10.1063/1.2335948.
[28]	沈强, 张联盟, 熊华平, 等. W-Mo-Ti体系波阻抗梯度飞片的制备与准等熵压缩特性 [J]. 科学通报, 2000, 45(8): 878–881. DOI: 10.3321/j.issn:0023-074X.2000.08.018. SHEN Q, ZHANG L M, XIONG H P, et al. Preparation and quasi-isentropic compression characteristics of W-Mo-Ti system wave impedance gradient flyer [J]. Chinese Science Bulletin, 2000, 45(8): 878–881. DOI: 10.3321/j.issn:0023-074X.2000.08.018.
[29]	ANTOUN T, SEAMAN L, CURRAN D R, et al. Spall fracture [M]. New York: Springer, 2003: 90−92. DOI: 10.1007/b97226.
[30]	KANEL G I, RAZORENOV S V, BOGATCH A, et al. Simulation of spall fracture of aluminum and magnesium over a wide range of load duration and temperature [J]. International Journal of Impact Engineering, 1997, 20(6–10): 467–478. DOI: 10.1016/S0734-743X(97)87435-0.