Study on adiabatic shear failure of W-Ni-Mn heavy alloy

LI Yun-kai; XIE Feng; WANG Fu-chi; LI Shu-kui

doi:10.11883/1001-1455(2007)02-0185-05

Volume 27 Issue 2

Oct. 2014

Turn off MathJax

Article Contents

Article Navigation > Explosion And Shock Waves > 2007 > 27(2): 185-189

LI Yun-kai, XIE Feng, WANG Fu-chi, LI Shu-kui. Study on adiabatic shear failure of W-Ni-Mn heavy alloy[J]. Explosion And Shock Waves, 2007, 27(2): 185-189. doi: 10.11883/1001-1455(2007)02-0185-05

Citation:

LI Yun-kai, XIE Feng, WANG Fu-chi, LI Shu-kui. Study on adiabatic shear failure of W-Ni-Mn heavy alloy[J]. Explosion And Shock Waves, 2007, 27(2): 185-189. doi: 10.11883/1001-1455(2007)02-0185-05

LI Yun-kai, XIE Feng, WANG Fu-chi, LI Shu-kui. Study on adiabatic shear failure of W-Ni-Mn heavy alloy[J]. Explosion And Shock Waves, 2007, 27(2): 185-189. doi: 10.11883/1001-1455(2007)02-0185-05

Citation:

LI Yun-kai, XIE Feng, WANG Fu-chi, LI Shu-kui. Study on adiabatic shear failure of W-Ni-Mn heavy alloy[J]. Explosion And Shock Waves, 2007, 27(2): 185-189. doi: 10.11883/1001-1455(2007)02-0185-05

PDF( 9157 KB)

Study on adiabatic shear failure of W-Ni-Mn heavy alloy

doi: 10.11883/1001-1455(2007)02-0185-05

1.
School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China

Publish Date: 2007-03-25

Abstract

Abstract

Dynamic compression tests of W-Ni-Mn alloy were performed, using cylindrical specimens 5 mm both in diameter and long with the split Hopkinson pressure bar (SHPB) technique. Both sections and fracture surfaces of specimens were observed with SEM. Connected with true stress-strain curves of specimens, it was found that adiabatic shear bands in sections of specimens appeared distinctly when specimens took place about 45% true strain. W-Ni-Mn alloy is easier to come into being adiabatic shear band(ASB) than the conventional tungsten heavy alloy, and has higher adiabatic shear sensitivity.
- solid mechanics,
- adiabatic shear band(ASB),
- split Hopkinson bar,
- tungsten heavy alloy