Citation: | Xue Jianfeng, Shen Peihui, Wang Xiaoming. Experimental study and numerical simulation of projectile obliquely penetrating into concrete target[J]. Explosion And Shock Waves, 2017, 37(3): 536-543. doi: 10.11883/1001-1455(2017)03-0536-08 |
[1] |
Gold V M, Vradis G C, Pearson J C. Concrete penetration by eroding projectiles:Experiments and analysis[J].Journal of Engineering Mechanics, 1996, 122(2):145-152. doi: 10.1061/(ASCE)0733-9399(1996)122:2(145)
|
[2] |
Forrestal M J, Frew D J, Hanchak S J, et al. Penetation of grount and concrete targets with ogive-nose steel projectiles[J]. International Journal of Impact Engineering, 1996, 18(5):465-476. doi: 10.1016/0734-743X(95)00048-F
|
[3] |
Macek R W, Duffey T. Finite cavity expansion method for near-surface effects and layering during earth penetration[J]. Modeling and simulation based engineering, 1998, 10(2):1138-1143. https://www.sciencedirect.com/science/article/pii/S0734743X99001566
|
[4] |
Longcope D B, Tabbara M R, Jung J. Modeling of oblique penetration into geologic targets using cavity expansion penetrator loading with target free-surface effects: SAND99-1104C[R]. Albuquerque, New Mexico, USA: Sandia Nation Laboratories, 1999. https://www.osti.gov/biblio/7224-N2IJ4G/webviewable/
|
[5] |
Warren T L, Poormon K L. Penetration of 6061-T6511 aluminum targets by ogive-nosed VAR 4340 steel projectiles at oblique angles: Experiments and simulations[J]. International Journal of Impact Engineering, 2001, 25:993-1022. doi: 10.1016/S0734-743X(01)00024-0
|
[6] |
Forrestal M J, Frew D J, Hicheron J P, et al. Penetration of concrete targets with deceleration time measurement[J]. International Journal of Impact Engineering, 2003, 28(5):479-497. doi: 10.1016/S0734-743X(02)00108-2
|
[7] |
Lampert S, Jeanquartier R. Perforation of concrete targets by an eroding tungsten-alloy rod[C]//Proceedings of the 22th International Symposium on Billistics. Vancouver, Canada, 2005: 838-843.
|
[8] |
刘小虎, 刘吉, 王乘, 等.弹丸低速垂直侵彻无钢筋混凝土的实验研究[J].爆炸与冲击, 1999, 19(4):323-328. doi: 10.3321/j.issn:1001-1455.1999.04.006
Liu Xiaohui, Liu Ji, Wang Cheng, et al. Experimental study on the projectile penetration normally into a plain concrete[J]. Explosion and Shock Waves, 1999, 19(4):323-328. doi: 10.3321/j.issn:1001-1455.1999.04.006
|
[9] |
王明洋, 郑大亮, 钱七虎.弹体对混凝土介质侵彻、贯穿的比例换算关系[J].爆炸与冲击, 2004, 24(2):108-114. doi: 10.3321/j.issn:1001-1455.2004.02.002
Wang Mingyang, Zheng Daliang, Qian Qihu. The scaling problems of penetration and perforation for projectile into concrete media[J]. Explosion and Shock Waves, 2004, 24(2):108-114. doi: 10.3321/j.issn:1001-1455.2004.02.002
|
[10] |
王浩, 陶如意.截卵形弹头对混凝土靶侵彻性能的试验研究[J].爆炸与冲击, 2005, 25(2):171-175. doi: 10.3321/j.issn:1001-1455.2005.02.013
Wang Hao, Tao Ruyi. Experimental study on the penetration performance of truncated-ogive nose projectile[J]. Explosion and Shock Waves, 2005, 25(2):171-175. doi: 10.3321/j.issn:1001-1455.2005.02.013
|
[11] |
武海军, 黄风雷, 王一楠. 高速弹体非正侵彻混凝土试验研究[C]//第八届全国爆炸力学学术会议文集. 吉安, 2007: 488-494. http://www.wanfangdata.com.cn/details/detail.do?_type=conference&id=6442558
|
[12] |
马爱娥, 黄凤雷.弹体斜侵彻钢筋混凝土的试验研究[J].北京理工大学学报, 2007, 27(6):482-486. doi: 10.3969/j.issn.1001-0645.2007.06.004
Ma Ai'e, Huang Fenglei. Experimental research on oblique penetration into reinforced concrete[J]. Transactions of Beijing Institute of Technology, 2007, 27(6):482-486. doi: 10.3969/j.issn.1001-0645.2007.06.004
|
[13] |
吕中杰, 徐钰巍, 黄凤雷.弹体斜侵彻混凝土过程中的方向偏转[J].兵工学报, 2009, 30(2):301-304. Lü http://www.cnki.com.cn/Article/CJFDTotal-BIGO2009S2065.htm
Lü Zhongjie, Xu Yuwei, Huang Fenglei. Transverse deflection of projectile obliquely penetrating into concrete[J]. Acta Armamentarii, 2009, 30(2):301-305. http://www.cnki.com.cn/Article/CJFDTotal-BIGO2009S2065.htm
|
[14] |
王可慧, 宁建国, 李志康, 等.高速弹体非正侵彻混凝土靶的弹道偏转试验研究[J].高压物理学报, 2013, 27(4):561-566. http://www.gywlxb.cn/CN/Y2013/V27/I4/561
Wang Kehui, Ning Jianguo, Li Zhikang, et al. Ballistic trajectory of high-velocity projectile obliquely penetrating concrete target[J]. Chinese Journal of High Pressure Physics, 2013, 27(4):561-566. http://www.gywlxb.cn/CN/Y2013/V27/I4/561
|