Volume 40 Issue 12
Dec.  2020
Turn off MathJax
Article Contents
GAO Yingjie, SUN Tiezhi, ZHANG Guiyong, YOU Tianqing, YIN Zhihong, ZONG Zhi. Flow characteristics and structure response of high-speed oblique water-entry for a revolution body[J]. Explosion And Shock Waves, 2020, 40(12): 123301. doi: 10.11883/bzycj-2020-0014
Citation: GAO Yingjie, SUN Tiezhi, ZHANG Guiyong, YOU Tianqing, YIN Zhihong, ZONG Zhi. Flow characteristics and structure response of high-speed oblique water-entry for a revolution body[J]. Explosion And Shock Waves, 2020, 40(12): 123301. doi: 10.11883/bzycj-2020-0014

Flow characteristics and structure response of high-speed oblique water-entry for a revolution body

doi: 10.11883/bzycj-2020-0014
  • Received Date: 2020-01-13
  • Rev Recd Date: 2020-05-27
  • Publish Date: 2020-12-05
  • The high-speed water-entry process of a revolution body involves fluid and structure interaction, which is a complex nonlinear and unsteady process. The revolution body with high speed is subjected to extreme impact load at the moment of hitting water surface which would cause great deformation or even damage to the structure. In order to investigate the physical understanding of the structural strength of revolution bodies and the mechanism of the cavity dynamics during high-speed water-entry process, a fluid-structure interaction (FSI) model based on a co-simulation progress between STAR-CCM+ and ABAQUS was adopted. The model performed a two-way interaction analysis which can consider the influence of the deformation of structure to fluid into. In the form of CFD analysis, a three-dimensional simulation with a six-degree-of-freedom model was carried out, in which the Shear Stress Transfer (SST) turbulence model and the volume of fluid (VOF) technique were used for turbulence computation and air-liquid interface tracking, respectively. In the part of FEM research, the shell mesh form with a whole Johnson-Cook material model was implemented to give a full consideration of deformation process and the accuracy of structure computation, which can effectively reflect the plastic deformation of structure. Firstly, a comparison between FSI result and experimental result of the high-speed water-entry process was conducted. The results show that the velocity attenuation, displacement and the cavity features are in good agreement with the experimental result, which proves two-way FSI method can be effectively applied into the research of high-speed water-entry problem. Then a numerical simulation of revolution body oblique water-entry with different velocity was carried out. The results show that the stress initially focuses on the edge of the bottom side of the revolution body, then it transports to the central area, remaining steady in the end. Compared with the results of rigid body, the peak value of impact load of the flexible body appears smaller due to the repeated deformation for buffer, which also causes the fluctuation of the load curve. After the initial water impacting, the cavity presents an asymmetric shape. As water-entry time increases, the asymmetry of cavity becomes weaker. In the process of 60 m/s oblique water-entry, surface closure of the cavity occurs. With the increase of water-entry velocity, the time of cavity surface closure takes longer. The peak value of the impact load whose period is quite short appears immediately at very beginning of water-entry process. After entering the water surface, the impact load of the revolution body decreases dramatically and rapidly and fluctuates slightly. The peak value of the impact load is related to water-entry velocity. The higher the velocity is, the earlier peak value of the impact load occurs and more obviously it fluctuates. As water-entry velocity exceeds 100 m/s, plastic deformation appears in the central area of bottom of revolution body.
  • loading
  • [1]
    王永虎, 石秀华. 入水冲击问题研究的现状与进展 [J]. 爆炸与冲击, 2008, 28(3): 276–282. DOI: 10.11883/1001-1455(2008)03-0276-07.

    WANG Y H, SHI X H. Review on research and development of water-entry impact problem [J]. Explosion and Shock Waves, 2008, 28(3): 276–282. DOI: 10.11883/1001-1455(2008)03-0276-07.
    [2]
    Von KARMAN T H. The impact on seaplane floats during landing [R]. Washington DC: National Advisory Committee on Aeronautics, 1929: 309−313. DOI: 10.1115/1.4023571.
    [3]
    WAGNER H. Über stoß-und gleitvorgänge an der oberfläche von flüssigkeiten [J]. Zeitschrift für Angewandte Mathematik und Mechanik, 1932, 12(4): 193–215. DOI: 10.1002/zamm.19320120402.
    [4]
    GAVRILENKO V N, KUBENKO V D. Plane problem of rigid body penetration into a compressible fluid [J]. Soviet Applied Mechanics, 1985, 21(4): 345–352. DOI: 10.1007/BF00886581.
    [5]
    WORTHINGTON A M, COLE R S. Impact with a liquid surface studied by the aid of instantaneous photography. Paper Ⅱ [J]. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1900, 194: 175–199. DOI: 10.1098/rsta.1900.0016.
    [6]
    MAY A. Effect of surface condition of a sphere on its water-entry cavity [J]. Journal of Applied Physics, 1951, 22(10): 1219–1222. DOI: 10.1063/1.1699831.
    [7]
    MAY A, WOODHULL J C. The virtual mass of a sphere entering water vertically [J]. Journal of Applied Physics, 1950, 21(12): 1285–1289. DOI: 10.1063/1.1699592.
    [8]
    ABELSON H I. Pressure measurements in the water-entry cavity [J]. Journal of Fluid Mechanics, 1970, 44(1): 129–144. DOI: 10.1017/S0022112070001738.
    [9]
    PANAHI R. Simulation of water-entry and water-exit problems using a moving mesh algorithm [J]. Journal of Theoretical and Applied Mechanics, 2012, 42(2): 79–92.
    [10]
    ERFANIAN M R, ANBARSOOZ M, RAHIMI N, et al. Numerical and experimental investigation of a three dimensional spherical-nose projectile water entry problem [J]. Ocean Engineering, 2015, 104: 397–404. DOI: 10.1016/j.oceaneng.2015.05.024.
    [11]
    NEAVES M D, EDWARDS J R. All-speed time-accurate underwater projectile calculations using a preconditioning algorithm [J]. Journal of Fluids Engineering, 2006, 128(2): 284–296. DOI: 10.1115/1.2169816.
    [12]
    孙辉, 卢炽华, 何友声. 二维楔形体冲击入水时的流固耦合响应的实验研究 [J]. 水动力学研究与进展, 2003, 18A(1): 104–109. DOI: 10.3969/j.issn.1000-4874.2003.01.018.

    SUN H, LU C H, HE Y S. Experimental research on the fluid-structure interaction in water entry of 2D elastic wedge [J]. Journal of Hydrodynamics, 2003, 18A(1): 104–109. DOI: 10.3969/j.issn.1000-4874.2003.01.018.
    [13]
    张伟, 郭子涛, 肖新科, 等. 弹体高速入水特性实验研究 [J]. 爆炸与冲击, 2011, 31(6): 579–584. DOI: 10.11883/1001-1455(2011)06-0579-06.

    ZHANG W, GUO Z T, XIAO X K, et al. Experimental investigations on behaviors of projectile high-speed water entry [J]. Explosion and Shock Waves, 2011, 31(6): 579–584. DOI: 10.11883/1001-1455(2011)06-0579-06.
    [14]
    郭子涛, 张伟, 郭钊, 等. 截卵形弹水平入水的速度衰减及空泡扩展特性 [J]. 爆炸与冲击, 2017, 37(4): 727–733. DOI: 10.11883/1001-1455(2017)04-0727-07.

    GUO Z T, ZHANG W, GUO Z, et al. Characteristics of velocity attenuation and cavity expansion induced by horizontal water-entry of truncated-ogive nosed projectiles [J]. Explosion and Shock Waves, 2017, 37(4): 727–733. DOI: 10.11883/1001-1455(2017)04-0727-07.
    [15]
    陈诚, 袁绪龙, 党建军, 等. 超空泡航行器20°角倾斜入水冲击载荷特性试验研究 [J]. 兵工学报, 2018, 39(6): 1159–1164. DOI: 10.3969/j.issn.1000-1093.2018.06.016.

    CHEN C, YUAN X L, DANG J J, et al. Experimental investigation into impact load during oblique water-entry of a supercavitating vehicle at 20° [J]. Acta Armamentarii, 2018, 39(6): 1159–1164. DOI: 10.3969/j.issn.1000-1093.2018.06.016.
    [16]
    YAN G X, PAN G, SHI Y, et al. Experimental and numerical investigation of water impact on air-launched AUVs [J]. Ocean Engineering, 2018, 167: 156–168. DOI: 10.1016/j.oceaneng.2018.08.044.
    [17]
    钱铖铖, 余春华, 穆青, 等. 发射速度和发射角度对射弹高速入水流动的影响 [J]. 兵器装备工程学报, 2019, 40(7): 35–39; 50. DOI: 10.11809/bqzbgcxb2019.07.008.

    QIAN C C, YU C H, MU Q, et al. Numerical research of effects of launch speed and launch angle on water entry of high-speed projectile [J]. Journal of Ordnance Equipment Engineering, 2019, 40(7): 35–39; 50. DOI: 10.11809/bqzbgcxb2019.07.008.
    [18]
    张佳悦, 李达钦, 吴钦, 等. 航行体回收垂直入水空泡流场及水动力特性研究 [J]. 力学学报, 2019, 51(3): 803–812. DOI: 10.6052/0459-1879-18-364.

    ZHANG J Y, LI D Q, WU Q, et al. Numerical investigation on cavity structures and hyrodynamics of the vehicle during vertical water-entry [J]. Chinese Journal of Theoretical and Applied Mechanics, 2019, 51(3): 803–812. DOI: 10.6052/0459-1879-18-364.
    [19]
    何春涛, 王聪, 闵景新, 等. 回转体匀速垂直入水早期空泡数值模拟研究 [J]. 工程力学, 2012, 29(4): 237–243.

    HE C T, WANG C, MIN J X, et al. Numerical simulation of early air-cavity of cylinder cone with vertical water-entry [J]. Engineering Mechanics, 2012, 29(4): 237–243.
    [20]
    侯昭, 孙铁志, 张桂勇, 等. 回转体倾斜入水空泡试验及六自由度数值计算研究 [J]. 宇航总体技术, 2017, 1(4): 38–45.

    HOU Z, SUN T Z, ZHANG G Y, et al. Experimental investigation and 6-DOF simulation of oblique water-entry cavity of revolution body [J]. Astronautical Systems Engineering Technology, 2017, 1(4): 38–45.
    [21]
    黄志刚, 孙铁志, 杨碧野, 等. 平头锥型回转体高速入水结构强度数值分析 [J]. 爆炸与冲击, 2019, 39(4): 043201. DOI: 10.11883/bzycj-2017-0330.

    HUANG Z G, SUN T Z, YANG B Y, et al. Numerical analysis on structural strength of a cone-shaped flatted revolution body during high-speed water-entry [J]. Explosion and Shock Waves, 2019, 39(4): 043201. DOI: 10.11883/bzycj-2017-0330.
    [22]
    陈宇, 曹红松, 王智军, 等. 一种新型防空MEFP的设计与仿真 [J]. 现代防御技术, 2013, 41(2): 202–206; 211. DOI: 10.3969/j.issn.1009-086x.2013.02.037.

    CHEN Y, CAO H S, WANG Z J, et al. New type of air defense MEFP [J]. Modern Defense Technology, 2013, 41(2): 202–206; 211. DOI: 10.3969/j.issn.1009-086x.2013.02.037.
    [23]
    AGMELL M, AHADI A, STÅHL J E. A numerical and experimental investigation of the deformation zones and the corresponding cutting forces in orthogonal cutting [J]. Advanced Materials Research, 2011, 223: 152–161. DOI: 10.4028/www.scientific.net/AMR.223.152.
    [24]
    CHEN T, HUANG W, ZHANG W, et al. Experimental investigation on trajectory stability of high-speed water entry projectiles [J]. Ocean Engineering, 2019, 175: 16–24. DOI: 10.1016/j.oceaneng.2019.02.021.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(19)  / Tables(1)

    Article Metrics

    Article views (1401) PDF downloads(87) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return