Computational design for complex loading on grade density impactor with strain rates of 105~106 s-1

Bai Jing-song; Li Lei; Yu Yu-ying; Wang Yu; Zhang Hong-ping; Luo Guo-qiang; Shen Qiang; Dai Cheng-da; Tan Hua; Wu Qiang; Zhang Lian-meng

doi:10.11883/1001-1455(2015)06-0792-07

Volume 35 Issue 6

Nov. 2015

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2015 > 35(6): 792-798

Bai Jing-song, Li Lei, Yu Yu-ying, Wang Yu, Zhang Hong-ping, Luo Guo-qiang, Shen Qiang, Dai Cheng-da, Tan Hua, Wu Qiang, Zhang Lian-meng. Computational design for complex loading on grade density impactor with strain rates of 105~106 s-1[J]. Explosion And Shock Waves, 2015, 35(6): 792-798. doi: 10.11883/1001-1455(2015)06-0792-07

Citation:

Bai Jing-song, Li Lei, Yu Yu-ying, Wang Yu, Zhang Hong-ping, Luo Guo-qiang, Shen Qiang, Dai Cheng-da, Tan Hua, Wu Qiang, Zhang Lian-meng. Computational design for complex loading on grade density impactor with strain rates of 10⁵~10⁶ s^-1[J]. Explosion And Shock Waves, 2015, 35(6): 792-798. doi: 10.11883/1001-1455(2015)06-0792-07

Citation:

Bai Jing-song, Li Lei, Yu Yu-ying, Wang Yu, Zhang Hong-ping, Luo Guo-qiang, Shen Qiang, Dai Cheng-da, Tan Hua, Wu Qiang, Zhang Lian-meng. Computational design for complex loading on grade density impactor with strain rates of 10⁵~10⁶ s^-1[J]. Explosion And Shock Waves, 2015, 35(6): 792-798. doi: 10.11883/1001-1455(2015)06-0792-07

PDF( 3514 KB)

Computational design for complex loading on grade density impactor with strain rates of 10⁵~10⁶ s^-1

doi: 10.11883/1001-1455(2015)06-0792-07

Bai Jing-song^{1, 2
,},
Li Lei¹,
Yu Yu-ying^{1, 2},
Wang Yu¹,
Zhang Hong-ping¹,
Luo Guo-qiang³,
Shen Qiang³,
Dai Cheng-da^{1, 2},
Tan Hua^{1, 2},
Wu Qiang^{1, 2},
Zhang Lian-meng³

1.
Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621999, Sichuan, China
2.
National Key Laboratory of Shock Wave and Detonation Physics, Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621999, Sichuan, China
3.
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, Hubei, China

Received Date: 2014-05-21
Rev Recd Date: 2014-10-22
Publish Date: 2015-12-10

Abstract

Abstract

In order to carry out the complex loading research with the strain rates varying from 10⁵ s^-1 to 10⁶ s^-1 on the light gas gun, we numerically simulated the complex loading on the steel target by the graded ensity impactor (GDI) of Al-Cu-W system using our own developed Lagrangian code MLEP (multi-material Lagrangian elastic-plastic). In our simulation, the effects of the thickness of the GDI and the power exponent of denstiy distribution on the pressure, velocity, and peak strain rate of the target were investigated. The results indicate that the loading time decreases as the power exponent of density distribution increases, and the profiles of pressure, velocity and peak strain rate at the later stage of the loading are steeper than those with smaller power exponents. Moreover, the effect of the thickness of the GDI is considered in our computational design to prevent the confluence of the rarefaction waves emanating from the back of the GDI and the interface between the target and LiF window on the impact interface. Finally, a dynamic test was conducted for the GDI based on the design, and the results show the good agreement between the design and the experiment, which paves the way for the strength measurement of materials in the future.
- solid mechanics,
- complex loading,
- computational design,
- grade density impactor,
- Al-Cu-W system

FullText(HTML)

References(11)

References

[1]	Barker L M, Scott D D. Development of a high-pressure quasi-isentropic plane wave generating capability[R]. SAND 84-0432, 1984.
[2]	Chhabildas L C, Barker L M. Dynamic quasi-isentropic compression of tungsten[C]∥Schmidt S C, Holmes N C. Shock Compression of Condensed Matter-1987. Amsterdam: Elsevier Science Publishers B. V., 1988: 111-114.
[3]	Chhabildas L C, Asay J R, Barker L M. Dynamic quasi-isentropic loading of tungsten[J]. High Pressure Research, 1990, 5: 842-844.
[4]	Chhabildas L C, Asay J R, Barker L M. Shear strength of tungsten under shock-and quasi-isentropic loading to 250 GPa[R]. SAND 88-0306, UC-704, 1988.
[5]	Chhabildas L C, Asay J R. Dynamic yield strength and spall strength measurements under quasi-isentropic loading[R]. SAND 90-0883C, 1990.
[6]	柏劲松, 罗国强, 黄娇凤, 等. Pillow飞片气炮加载实验的数值模拟研究[J].高压物理学报, 2011, 25(5): 390-394. Bai Jing-song, Luo Guo-qiang, Huang Jiao-feng, et al. Numerical simulation of the gas gun experiment with pillow impactor loading[J]. Chinese Journal of High Pressure Physics, 2011, 25(5): 390-394.
[7]	柏劲松, 罗国强, 王翔, 等. Mg-W体系密度梯度飞片复杂加载实验的计算分析[J].力学学报, 2010, 42(6): 1068-1073. Bai Jing-song, Luo Guo-qiang, Wang Xiang, et al. Calculation and analysis of the Mg-W GDI complex loading experiment[J]. Acta Mechanica Sinica, 2010, 42(6): 1068-1073.
[8]	沈强, 王传彬, 张联盟, 等.为实现准等熵压缩的波阻抗梯度飞片的实验研究[J].物理学报, 2002, 51(8): 1759-1762. http://www.oalib.com/paper/1439659 Shen Qiang, Wang Chuan-bin, Zhang Lian-meng, et al. A study on generating quasi-isentropic compression via graded impedance flyer[J]. Acta Physica Sinica, 2002, 51(8): 1759-1762. http://www.oalib.com/paper/1439659
[9]	Luo Guo-qiang, Zhang Jian, Li Mei-juan, et al. Interfacial microstructure and mechanical strength of 93W/Ta diffusion-bonded joints with Ni interlayer[J]. Metallurgical and Materials Transactions: A, 2013, 44(2): 602-605. doi: 10.1007/s11661-012-1570-1
[10]	Zhang Jian, Luo Guo-qiang, Li Mei-juan, et al. Study on microstructure and property of diffusion-bonded Mo-Cu joints[J]. Key Engineering Materials, 2012, 508: 178-182.
[11]	柏劲松, 罗国强, 唐蜜, 等.冲击加载-准等熵加载过程的密度梯度飞片计算设计[J].高压物理学报, 2009, 23(3): 173-180. Bai Jing-song, Luo Guo-qiang, Tang Mi, et al. Computational design of graded density impactors for shock loading and quasi-isentropic compression[J]. Chinese Journal of High Pressure Physics, 2009, 23(3): 173-180.

Relative Articles

[1]	Chen Yongtao, Hong Renkai, Chen Haoyu, Hu Haibo, Tang Tiegang. Micro-spalling of metal under explosive loading[J]. Explosion And Shock Waves, 2017, 37(1): 61-67. doi: 10.11883/1001-1455(2017)01-0061-07
[2]	Hu Qiushi, Zhao Feng, Li Kewu, Fu Hua, Song Zhenfei. Lateral release effect in shock-loaded specimens during soft recovery process[J]. Explosion And Shock Waves, 2016, 36(4): 532-540. doi: 10.11883/1001-1455(2016)04-0532-09
[3]	Yu Yuying, Tan Ye, Tan Hua, Dai Chengda, Peng Jianxiang, Li Xuemei, Wu Qiang, Wang Xiang. A shock-reload wave technique for dynamic strength study of materials at high pressure by self-consistent method[J]. Explosion And Shock Waves, 2016, 36(4): 491-496. doi: 10.11883/1001-1455(2016)04-0491-06
[4]	Li Song-yan, Zheng Zhi-jun, Yu Ji-lin. Energy-absorbing structure design and crashworthiness analysis of high-speed trains[J]. Explosion And Shock Waves, 2015, 35(2): 164-170. doi: 10.11883/1001-1455(2015)02-0164-07
[5]	Hong Liang, Jin Zhi-ren, Deng Zong-wei. Bar diameter effect of minimum loading strain rate in granite impacting tests by SHPB[J]. Explosion And Shock Waves, 2014, 34(3): 328-333. doi: 10.11883/1001-1455(2014)03-0328-06
[6]	Yu Yu-ying, Xi Feng, Dai Cheng-da, Cai Ling-cang, Tan Hua, Li Xue-mei. Measurement of strength in a Zr-based bulk metallic glass under dynamic high-pressure loading[J]. Explosion And Shock Waves, 2014, 34(1): 1-5.
[7]	Li Ying-lei, Ye Xiang-ping, Zhang Zu-gen, Li Ying-hua, Cai Ling-cang, Wu Qiang, Dai Cheng-da. A design of passive confined SHPB experiment for materials with low bulk modulus[J]. Explosion And Shock Waves, 2014, 34(6): 667-672. doi: 10.11883/1001-1455(2014)06-0667-06
[8]	Zhang Bo-yi, Wang Wei, Wu Gao-hui. Dynamic-compression mechanical properties and energy-absorption capability of fly-ash cenospheres-reinforced 1199Al-matrix composite foam[J]. Explosion And Shock Waves, 2014, 34(1): 28-34. doi: 10.11883/1001-1455(2014)01-0028-07
[9]	Jiang Shi -ping, Yu Hai -long, Rui Xiao -ting, Hong Jun, Li Chao. Dynamic analysis on impact fragmentation of granular systems[J]. Explosion And Shock Waves, 2014, 34(2): 247-251. doi: 10.11883/1001-1455(2014)02-0247-05
[10]	Wang Qiong-jiao, Guo Wei-guo, Zuo Hong-xing, Xu Feng, Zeng Zhi-yin, Shao Xiao-jun. Fracture toughness of ultrastrength steel 18NiC250 at different loading rates[J]. Explosion And Shock Waves, 2013, 33(3): 238-242. doi: 10.11883/1001-1455(2013)03-0238-05
[11]	Fan Fei-lin, Xu Jin-yu. High-temperature loading techniques in large-diameter SHPB experiment and its application[J]. Explosion And Shock Waves, 2013, 33(1): 54-60. doi: 10.11883/1001-1455(2013)01-0054-07
[12]	TangTie-gang, LiuCang-li. Ontheconstitutivemodelforoxygen-freehigh-conductivitycopper underhighstrain-ratetension[J]. Explosion And Shock Waves, 2013, 33(6): 581-586. doi: 10.11883/1001-1455(2013)06-0581-06
[13]	WuHe-xiang, LiuYing. Influencesofdensitygradientvariationonmechanicalperformances ofdensity-gradedhoneycombmaterials[J]. Explosion And Shock Waves, 2013, 33(2): 163-168. doi: 10.11883/1001-1455(2013)02-0163-06
[14]	LIU Ying, HE Zhang-quan, WU He-xiang, ZHANG Xin-chun. In-planedynamiccrushingoffunctionallylayeredmetalhoneycombs[J]. Explosion And Shock Waves, 2011, 31(3): 225-331. doi: 10.11883/1001-1455(2011)03-0225-07
[15]	TANG Tie-gang, LI Qing-zhong, LIU Cang-li. Design analysis of expanding gap-ring test for studying evolvement of damage[J]. Explosion And Shock Waves, 2009, 29(6): 561-565. doi: 10.11883/1001-1455(2009)06-0561-05
[16]	CHEN Yong-tao, LI Qing-zhong, HU Hai-bo. Phase transition and spalling behavior of metal with low transition stress under high pressure[J]. Explosion And Shock Waves, 2008, 28(6): 503-506. doi: 10.11883/1001-1455(2008)06-0503-04
[17]	WANG Gang-hua, SUN Cheng-wei, ZHAO Jian-heng, HU Xi-jing, JIANG Ji-hao. One-dimensional, magnetohydrodynamic simulations of magnetically driven flyer plates[J]. Explosion And Shock Waves, 2008, 28(3): 261-264. doi: 10.11883/1001-1455(2008)03-0261-04
[18]	LI Yun-kai, XIE Feng, WANG Fu-chi, LI Shu-kui. Study on adiabatic shear failure of W-Ni-Mn heavy alloy[J]. Explosion And Shock Waves, 2007, 27(2): 185-189. doi: 10.11883/1001-1455(2007)02-0185-05
[19]	HOU Hai-liang, ZHU Xi, GU Mei-bang. Study on failure mode of stiffened plate and optimized design of structure subjected to blast load[J]. Explosion And Shock Waves, 2007, 27(1): 26-33. doi: 10.11883/1001-1455(2007)01-0026-08
[20]	LI Xue-mei, JIN Xiao-gang, LI Da-hong. The spall characteristics of cylindrical steel tube under inward explosion loading[J]. Explosion And Shock Waves, 2005, 25(2): 107-111. doi: 10.11883/1001-1455(2005)02-0107-05