Impact-induced initiation criteria of PTFE/Al by split Hopkinson pressure bar

Wubuliaisan MAIMAITITUERSUN; GE Chao; TIAN Chao; DONG Yongxiang

doi:10.11883/bzycj-2017-0075

Volume 38 Issue 5

Jul. 2018

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > Explosion And Shock Waves > 2018 > 38(5): 957-965

Wubuliaisan MAIMAITITUERSUN, GE Chao, TIAN Chao, DONG Yongxiang. Impact-induced initiation criteria of PTFE/Al by split Hopkinson pressure bar[J]. Explosion And Shock Waves, 2018, 38(5): 957-965. doi: 10.11883/bzycj-2017-0075

Citation:

Wubuliaisan MAIMAITITUERSUN, GE Chao, TIAN Chao, DONG Yongxiang. Impact-induced initiation criteria of PTFE/Al by split Hopkinson pressure bar[J]. Explosion And Shock Waves, 2018, 38(5): 957-965. doi: 10.11883/bzycj-2017-0075

Citation:

PDF( 3317 KB)

Impact-induced initiation criteria of PTFE/Al by split Hopkinson pressure bar

doi: 10.11883/bzycj-2017-0075

State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China

Received Date: 2017-03-14
Rev Recd Date: 2017-07-12
Publish Date: 2018-09-25

Abstract

Abstract

Impact-induced initiation criteria of Al particles reinforced PTFE (PTFE/Al) prepared by compression/sintering were studied by split Hopkinson pressure bar (SHPB) and high speed photography in this work. SHPB systems comprising of either steel or aluminum bars were applied to test PTFE/Al samples of different dimensions, in order to study the effect of the impact stress and the loading strain rate on the impact-induced initiation behaviors of PTFE/Al. It shows that the impact-induced initiation process of PTFE/Al mainly includes the deformation, fragmentation and reaction, which is simultaneously related to the impact stress and the loading strain rate. Based on the experimental results, the criteria of impact stress and loading strain rate for the impact-induced initiation of PTFE/Al have been obtained. Moreover, an analytical expression of impact-induced initiation criteria including impact stress and loading strain rate was established and a theoretical curve was predicted for the impact-induced initiation events of PTFE/Al under SHPB tests.
- PTFE/Al,
- split Hopkinson pressure bar,
- impact-induced reaction,
- reaction criteria

FullText(HTML)

References(24)

References

[1]	JOSHI V S. Process for making polytetrafluoroethylene-aluminium composite andproduct made: US6547993B1[P]. 2003.
[2]	乔良, 涂建, 赵利军, 等.A1/W/PTFE粒径级配关系对材料强度影响的实验研究[J].兵器材料科学与工程, 2014, 37(6):17-21. doi: 10.3969/j.issn.1004-244X.2014.06.005 QIAO Liang, TU Jian, ZHAO Lijun, et al. Influence of particle sizegrading on strength of A1/W/PTFE composite[J]. Ordnance Material Science and Engineering, 2014, 37(6):17-21. doi: 10.3969/j.issn.1004-244X.2014.06.005
[3]	阳世清, 徐松林, 张彤.PTFE/Al反应材料制备工艺及性能[J].国防科技大学学报, 2008, 30(6):40-42. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gfkjdxxb200806009 YANG Shiqing, XU Songlin, ZHANG Tong. Preparation and performance of PTEF/Al reactive materials[J]. Journal of National University of Defense Technology, 2008, 30(6):40-42. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gfkjdxxb200806009
[4]	赵鹏铎, 卢芳云, 李俊玲, 等.活性材料PTFE/Al动态压缩性能[J].含能材料, 2009, 17(4):459-462. doi: 10.3969/j.issn.1006-9941.2009.04.020 ZHAO Pengduo, LU Fangyun, LI Junling, et al. The dynamic compressive properties of Al/PTFE reactive materials[J]. Chinese Journal of Energetic Materials, 2009, 17(4):459-462. doi: 10.3969/j.issn.1006-9941.2009.04.020
[5]	徐松林.Al/PTFE含能反应材料力学性能研究[D].长沙: 国防科技大学, 2010. XU Songlin. Study on the mechanical performance of Polytetrafluorethylene/Al energetic reactive materials[D]. Changsha: National University of Defense Technology, 2010.
[6]	王海福, 刘宗伟, 俞为民, 等.活性破片能量输出特性试验研究[J].北京理工大学学报, 2009, 29(8):663-666. http://lib.cqvip.com/qk/81668X/200001/31768611.html WANG Haifu, LIU Zongwei, YU Weimin, et al. Experimental investigation of energy release characteristics of reactive fragments[J]. Transactions of Beijing Institute of Technology, 2009, 29(8):663-666. http://lib.cqvip.com/qk/81668X/200001/31768611.html
[7]	ZHANG X F, SHI A S, QIAO L, et al. Experimental study on impact-initiated characters of multifunctional energetic structural materials[J]. Journal of Applied Physics, 2013, 113(8):083508. doi: 10.1063/1.4793281
[8]	帅俊峰, 蒋建伟, 王树有, 等.复合反应破片对钢靶侵彻的实验研究[J].含能材料, 2009, 17(6):722-725. doi: 10.3969/j.issn.1006-9941.2009.06.019 SHUAI Junfeng, JIANG Jianwei, WANG Shuyou, et al. Compound reactive fragment penetrating steel target[J]. Chinese Journal of Energetic Materials, 2009, 17(6):722-725. doi: 10.3969/j.issn.1006-9941.2009.06.019
[9]	谢长友, 蒋建伟, 帅俊峰, 等.复合反应破片对柴油油箱的毁伤效应实验研究[J].高压物理学报, 2009, 23(6):447-452. doi: 10.3969/j.issn.1000-5773.2009.06.008 XIE Changyou, JIANG Jianwei, SHUAI Junfeng, et al. Experimental study on the damage effect of compound reactive fragment penetrating diesel oil tank[J]. Chinese Journal of High Pressure Physics, 2009, 23(6):447-452. doi: 10.3969/j.issn.1000-5773.2009.06.008
[10]	辛春亮, 史文卿, 张雷雷, 等.活性药型罩聚能装药子弹对钢锭的毁伤效应研究[C]//第6届含能材料与钝感弹药技术学术研讨会论文集.成都, 2014.
[11]	GE C, DONG Y X, MAIMAITITUERSUN W. Microscale simulation on mechanical properties of Al/PTFE composite based on real microstructures[J]. Materials, 2016, 9(7):590.DOI: 10.3390/ma9070590.
[12]	乌布力艾散·麦麦提图尔荪, 葛超, 董永香, 等.基于Al/PTFE真实细观特性统计模型的宏观力学性能模拟[J].复合材料学报, 2016, 33(11):9-17. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=fhclxb201611016 MAIMAITITUERSUN Wubuliaisan, GE Chao, DONG Yongxiang, et al. Simulation on mechanical properties of Al/PTFE based on mesoscopic statistical model[J]. Acta Materiae Compositae Sinica, 2016, 33(11):9-17. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=fhclxb201611016
[13]	AMES R G. Vented chamber calorimetry for impact-initiated energetic materials[C]//43rd AIAA Aerospace Sciences Meeting and Exhibit. Reno, Nevada, 2005.
[14]	LEE R J, JR W M, CARNEY J R, et al. Reactive materials studies[C]//Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. AIP Publishing, 2006: 169-174.
[15]	FENG B, FANG X, LI Y C, et al. An initiation phenomenon ofAl/PTFE under quasi-static compression[J]. Chemical Physics Letters, 2015, 637:38-41. doi: 10.1016/j.cplett.2015.07.056
[16]	HUNT E M, MALCOLM S, PANTOYA M L, et al. Impact ignition of nano and micron composite energetic materials[J]. International Journal of Impact Engineering, 2009, 36(6):842-846. doi: 10.1016/j.ijimpeng.2008.11.011
[17]	MOCK W, DROTAR J T. Effect of aluminum particle size on the impact initiation of pressed ptfe/Al composite rods[C]//Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. American Institute of Physics, 2007: 971-974.
[18]	任会兰, 李尉, 刘晓俊, 等.钨颗粒增强铝/聚四氟乙烯材料的冲击反应特性[J].兵工学报, 2016, 37(5):872-878. doi: 10.3969/j.issn.1000-1093.2016.05.014 REN Huilan, LI Wei, LIU Xiaojun, et al. Reaction behaviors of AI/PTFE materials enhanced by W particles[J]. Acta Armamentarii, 2016, 37(5):872-878. doi: 10.3969/j.issn.1000-1093.2016.05.014
[19]	WANG L, LIU J X, LI S K, et al. Investigation on reaction energy, mechanical behavior and impact insensitivity of W-PTFE-Al composites with different W percentage[J]. Material and Design, 2016, 92:397-404. doi: 10.1016/j.matdes.2015.12.045
[20]	徐松林, 阳世清, 赵鹏铎, 等.PTFE/Al含能复合材料的压缩力学行为研究[J].力学学报, 2009, 41(5):708-712. doi: 10.3321/j.issn:0459-1879.2009.05.013 XU Songlin, YANG Shiqing, ZHAO Pengduo, et al. The study on the compressive behavior of Al/PTFE energetic composite[J]. Chinese Journal of Theoretical and Applied Mechanics, 2009, 41(5):708-712. doi: 10.3321/j.issn:0459-1879.2009.05.013
[21]	GE C, DONG Y X, MAIMAITITUERSUN W, et al. Experimental study on impact-induced initiation thresholds of polytetrafluoroethylene/aluminum composite[J]. Propellants Explosives Pyrotechnics, 2017, 42:514-522. DOI: 10.1002/prep.201600216.
[22]	CHEN W, SONG B. Split Hopkinson (Kolsky) bar:Design testing and application[M]. New York:Spring, 2011.
[23]	YAVUZ H, TUFEKCI K, KAYACAN R, et al. Predicting the dynamic compressive strength of carbonate rocks from quasi-static properties[J]. Experimental Mechanics, 2013, 53(3):367-376. doi: 10.1007/s11340-012-9648-7
[24]	Herbold E B, Nesterenko V F, Benson D J, et al. Particle size effect on strength, failure, and shock behavior in polytetrafluoroethylene-Al-W granular composite materials[J]. Journal of Applied Physics, 2008, 104(10):103903. DOI: 10.1063/1.3000631.

Relative Articles

[1]	REN Qingfei, ZHANG Yongrou, HU Lingling, YIN Ziji. A new experimental technique of dynamic compression-shear combined loading based on metamaterials[J]. Explosion And Shock Waves, 2024, 44(10): 101001. doi: 10.11883/bzycj-2024-0297
[2]	ZUO Ting, LI Xianglong, WANG Jianguo, HU Qiwen, TAO Zihao, HU Tao, ZHANG Binbin, SONG Jiawang. Numerical modeling of the energy dissipation and fragmentation of copper-bearing rock under impact load[J]. Explosion And Shock Waves. doi: 10.11883/bzycj-2024-0214
[3]	XIE Beijing, CHEN Mingjin, CHEN Siyu, LIU Zhiyao. Experimental study on mechanical properties of ice shock under different states[J]. Explosion And Shock Waves. doi: 10.11883/bzycj-2024-0207
[4]	WEN Lei, FENG Wenjie, LI Mingye, KOU Zilong, WANG Liang, YU Junhong. Strain rate effect on crack propagation and fragmentation characteristics of red sandstone containing pre-cracks[J]. Explosion And Shock Waves, 2023, 43(11): 113103. doi: 10.11883/bzycj-2023-0061
[5]	YE Haiwang, QIAN Zhengkun, LEI Tao, WEN Ying, LI Rui. Bedding effect and macro-micro mechanism of graphite ore dynamic mechanical properties under impact loads[J]. Explosion And Shock Waves, 2023, 43(12): 123102. doi: 10.11883/bzycj-2023-0223
[6]	LUO Ning, SUO Yunchen, ZHANG Haohao, CHAI Yabo, ZHAI Cheng, QU Zhe, BAI Guizhi. On dynamic behaviors and failure of bedding coal rock subjected to cyclic impact[J]. Explosion And Shock Waves, 2023, 43(4): 043102. doi: 10.11883/bzycj-2022-0253
[7]	YE Xiangping, NAN Xiaolong, DUAN Zhiwei, YU Yuying, CAI Lingcang, LIU Cangli. Effects of roughness on dynamic compression propertiesof metallic materials by SHPB technique[J]. Explosion And Shock Waves, 2022, 42(1): 013104. doi: 10.11883/bzycj-2021-0008
[8]	REN Yeping, LIU Rui, CHEN Pengwan, GUO Yansong, HU Qiwen, GE Chao, WANG Haifu. A study of the response characteristics of Al/PTFE reactive materials under shock loading[J]. Explosion And Shock Waves, 2022, 42(6): 063103. doi: 10.11883/bzycj-2021-0397
[9]	YANG Guoliang, BI Jingjiu, GUO Weimin, ZHANG Zhifei, HAN Zimo, CHENG Shuaijie. Experimental study on the effect of loading angle on crack propagation in bedding shale[J]. Explosion And Shock Waves, 2021, 41(9): 093101. doi: 10.11883/bzycj-2021-0097
[10]	HE Liling, ZHANG Fangju, YAN Yixia, XIE Ruoze, XU Aimin, ZHOU Yanliang. Study on the impact initiated reaction of Ti-6Al-4V prejectiles by the fracture modes[J]. Explosion And Shock Waves, 2020, 40(12): 122301. doi: 10.11883/bzycj-2020-0046
[11]	JIANG Yaqin, WU Shuaifeng, LIU Dianshu, JIA Bei, WANG Meng, LI Xiaolu. Dynamic damage constitutive model of sandstone based on component combination theory[J]. Explosion And Shock Waves, 2018, 38(4): 827-833. doi: 10.11883/bzycj-2017-0173
[12]	NIE Hailiang, SHI Xiaopeng, CHEN Chunyang, LI Yulong. Data processing method for bidirectional-load split Hopkinson compression bar[J]. Explosion And Shock Waves, 2018, 38(3): 517-524. doi: 10.11883/bzycj-2017-0361
[13]	GE Chao, Wubuliaisan MAIMAITITUERSUN, TIAN Chao, DONG Yongxiang, SONG Qing. Impact-induced initiation thresholds of polytetrafluoroethylene/Al composite by gas gun[J]. Explosion And Shock Waves, 2018, 38(1): 1-8. doi: 10.11883/bzycj-2017-0030
[14]	Hou Hai-zhou, Hu Yi-ting, Peng Jin-hua, Jin Jian-wei. Dynamic behavior and constitutive model of phenolic cotton fabric material under impact loading[J]. Explosion And Shock Waves, 2015, 35(6): 858-863. doi: 10.11883/1001-1455(2015)06-0858-06
[15]	Luo Xin, Xu Jin-yu, Bai Er-lei, Li Wei-min. Comparative study of the effect of the type of alkali on the strain rate effect of geopolymer concrete[J]. Explosion And Shock Waves, 2014, 34(3): 340-346. doi: 10.11883/1001-1455(2014)03-0340-07
[16]	Zhang Bo-yi, Wang Wei, Wu Gao-hui. Dynamic-compression mechanical properties and energy-absorption capability of fly-ash cenospheres-reinforced 1199Al-matrix composite foam[J]. Explosion And Shock Waves, 2014, 34(1): 28-34. doi: 10.11883/1001-1455(2014)01-0028-07
[17]	Sun Chao-xiang, Ju Yu-tao, Zheng Ya, Wang Peng-bo, Zhang Jun-fa. Mechanical properties of double-base propellant at high strain rates and its damage-modified ZWT constitutive model[J]. Explosion And Shock Waves, 2013, 33(5): 507-512. doi: 10.11883/1001-1455(2013)05-0507-06
[18]	XIE Ruo-ze, HU Wen-jun, CHEN Cheng-jun, PAN Xiao-xia, HE Peng, ZHANG Fang-ju, CHEN Jie. DynamiccompressivemechanicalpropertiesofV-5Cr-5Ti atroomtemperature[J]. Explosion And Shock Waves, 2010, 30(6): 641-646. doi: 10.11883/1001-1455(2010)06-0641-06
[19]	LAN Sheng-wei, ZENG Xin-wu. Effect of grain size on dynamic mechanical properties of pure aluminum[J]. Explosion And Shock Waves, 2008, 28(5): 462-466. doi: 10.11883/1001-1455(2008)05-0462-05
[20]	LI Yun-kai, XIE Feng, WANG Fu-chi, LI Shu-kui. Study on adiabatic shear failure of W-Ni-Mn heavy alloy[J]. Explosion And Shock Waves, 2007, 27(2): 185-189. doi: 10.11883/1001-1455(2007)02-0185-05

Supplements(0)

Cited By

Cited by

Periodical cited type(7)

1.	耿恒恒，刘睿，陈鹏万，任慧，葛超，王海福. 氟橡胶质量分数对nAl@氟橡胶活性材料点火燃烧特性的影响研究. 北京理工大学学报. 2023(10): 1078-1085 .
2.	任鑫鑫，李裕春，柳锦春. HTa填充改性Al/PTFE反应材料的力学响应与侵彻毁伤. 含能材料. 2023(08): 753-762 .
3.	Qing-bo Yu，Jia-hao Zhang，Hong-wei Zhao，Yan-wen Xiao，Hai-fu Wang. Behind-plate overpressure effect of steel-encased reactive material projectile impacting thin aluminum plate. Defence Technology. 2022(05): 723-734 .
4.	聂政元，肖建光，王岩鑫，谢志渊. THV基活性材料力学性能与点火反应特性. 兵工学报. 2022(12): 3030-3039 .
5.	王在成，李姝妍，姜春兰，蔡尚晔，陈百权. 高Al含量PTFE基材料爆炸冲击压缩特性及反应行为. 北京理工大学学报. 2021(04): 356-363 .
6.	高庆，程秀莲，唐恩凌，陈闯，常孟周，韩雅菲. Al/PTFE弹丸冲击反应释能及Al颗粒粒径的影响. 兵器装备工程学报. 2020(08): 121-125 .
7.	于钟深，方向，李裕春，任俊凯，张军，宋佳星. TiH_2含量对Al/PTFE动态力学性能和撞击感度的影响. 爆炸与冲击. 2019(09): 44-51 . 本站查看